From: Dom Cobley Date: Wed, 8 Jun 2022 19:49:22 +0000 (+0100) Subject: Add HDMI1 facility to the driver. X-Git-Tag: accepted/tizen/unified/20240422.153132~599 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4d2293570168ca1cce67ba3f047951e4f5b871c0;p=platform%2Fkernel%2Flinux-rpi.git Add HDMI1 facility to the driver. Also check for which HDMI devices are connected and only create devices for those that are present. Signed-off-by: James Hughes Signed-off-by: Dom Cobley snd_bcm2835: disable HDMI audio when vc4 is used (#3640) Things don't work too well when both the vc4 driver and the firmware driver are trying to control the same audio output: [ 763.569406] bcm2835_audio bcm2835_audio: vchi message timeout, msg=5 Hence, when the vc4 HDMI driver is used, let it control audio. This is done by introducing a new device tree property to the audio node, and extending the vc4-kms-v3d overlays to set it appropriately. Signed-off-by: Hristo Venev staging: bcm2835-audio: Add disable-headphones flag Add a property to allow the headphone output to be disabled. Use an integer property rather than a boolean so that an overlay can clear it. Signed-off-by: Phil Elwell staging: bcm2835-audio: Find compatible firmware node Commit "ARM: dts: Adopt the upstream snd_bcm2835 handling" removed the audio section from the DT and the driver can no longer access the referenced firmware node 'brcm,firmware'. Fix that by searching for a compatible firmware node instead, similar to drivers/gpu/drm/vc4. Fixes: b9e62329e096 ("ARM: dts: Adopt the upstream snd_bcm2835 handling") Signed-off-by: Juerg Haefliger staging: bcm2835-audio: Fix firmware node refcounting Decrement firmware node refcounts on all exit paths in set_hdmi_enables(). Signed-off-by: Juerg Haefliger staging: bcm2835-audio: Log errors in case of firmware query failures The driver queries the firmware for the number of detected HDMI displays and their IDs. Log error messages if queries fail. Signed-off-by: Juerg Haefliger staging: bcm2835-audio: Fix unused enable_hdmi module parameter The commit "Add HDMI1 facility to the driver." made the enable_hdmi module parameter unused. Fix that by making it a global switch for all available HDMI audio outputs. Fixes: 755f3366084b ("Add HDMI1 facility to the driver.") Signed-off-by: Juerg Haefliger staging: bcm2835-audio: Fix unused enable_headphones module parameter Since commit "staging: bcm2835-audio: Add disable-headphones flag" the enabling/disabling of the headphones output is solely determined by the presence of the DT property 'brcm,disable-headphones' and the enable_headphones module parameter is unused. Fix that by making it a global switch. Fixes: ee90e47d8824 ("staging: bcm2835-audio: Add disable-headphones flag") Signed-off-by: Juerg Haefliger --- diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c index 68e8d49..29e773f 100644 --- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c +++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835-pcm.c @@ -321,10 +321,11 @@ static const struct snd_pcm_ops snd_bcm2835_playback_spdif_ops = { /* create a pcm device */ int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name, - int idx, enum snd_bcm2835_route route, + enum snd_bcm2835_route route, u32 numchannels, bool spdif) { struct snd_pcm *pcm; + int idx = chip->index++; int err; err = snd_pcm_new(chip->card, name, idx, numchannels, 0, &pcm); diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c index 00bc898..6347bec 100644 --- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c +++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.c @@ -8,8 +8,9 @@ #include #include "bcm2835.h" +#include -static bool enable_hdmi; +static bool enable_hdmi, enable_hdmi0, enable_hdmi1; static bool enable_headphones = true; static int num_channels = MAX_SUBSTREAMS; @@ -65,14 +66,13 @@ static int bcm2835_audio_dual_newpcm(struct bcm2835_chip *chip, u32 numchannels) { int err; - - err = snd_bcm2835_new_pcm(chip, name, 0, route, + err = snd_bcm2835_new_pcm(chip, name, route, numchannels, false); if (err) return err; - err = snd_bcm2835_new_pcm(chip, "IEC958", 1, route, 1, true); + err = snd_bcm2835_new_pcm(chip, name, route, 1, true); if (err) return err; @@ -84,20 +84,33 @@ static int bcm2835_audio_simple_newpcm(struct bcm2835_chip *chip, enum snd_bcm2835_route route, u32 numchannels) { - return snd_bcm2835_new_pcm(chip, name, 0, route, numchannels, false); + return snd_bcm2835_new_pcm(chip, name, route, numchannels, false); } -static struct bcm2835_audio_driver bcm2835_audio_hdmi = { +static struct bcm2835_audio_driver bcm2835_audio_hdmi0 = { + .driver = { + .name = "bcm2835_hdmi", + .owner = THIS_MODULE, + }, + .shortname = "bcm2835 HDMI 1", + .longname = "bcm2835 HDMI 1", + .minchannels = 1, + .newpcm = bcm2835_audio_dual_newpcm, + .newctl = snd_bcm2835_new_hdmi_ctl, + .route = AUDIO_DEST_HDMI0 +}; + +static struct bcm2835_audio_driver bcm2835_audio_hdmi1 = { .driver = { .name = "bcm2835_hdmi", .owner = THIS_MODULE, }, - .shortname = "bcm2835 HDMI", - .longname = "bcm2835 HDMI", + .shortname = "bcm2835 HDMI 2", + .longname = "bcm2835 HDMI 2", .minchannels = 1, .newpcm = bcm2835_audio_dual_newpcm, .newctl = snd_bcm2835_new_hdmi_ctl, - .route = AUDIO_DEST_HDMI + .route = AUDIO_DEST_HDMI1 }; static struct bcm2835_audio_driver bcm2835_audio_headphones = { @@ -120,8 +133,12 @@ struct bcm2835_audio_drivers { static struct bcm2835_audio_drivers children_devices[] = { { - .audio_driver = &bcm2835_audio_hdmi, - .is_enabled = &enable_hdmi, + .audio_driver = &bcm2835_audio_hdmi0, + .is_enabled = &enable_hdmi0, + }, + { + .audio_driver = &bcm2835_audio_hdmi1, + .is_enabled = &enable_hdmi1, }, { .audio_driver = &bcm2835_audio_headphones, @@ -268,10 +285,70 @@ static int snd_add_child_devices(struct device *device, u32 numchans) return 0; } +static void set_hdmi_enables(struct device *dev) +{ + struct device_node *firmware_node; + struct rpi_firmware *firmware = NULL; + u32 num_displays, i, display_id; + int ret; + + firmware_node = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); + if (firmware_node) { + firmware = rpi_firmware_get(firmware_node); + of_node_put(firmware_node); + } + + if (!firmware) { + dev_err(dev, "Failed to get fw structure\n"); + return; + } + + ret = rpi_firmware_property(firmware, + RPI_FIRMWARE_FRAMEBUFFER_GET_NUM_DISPLAYS, + &num_displays, sizeof(u32)); + if (ret) { + dev_err(dev, "Failed to get fw property NUM_DISPLAYS\n"); + goto out_rpi_fw_put; + } + + for (i = 0; i < num_displays; i++) { + display_id = i; + ret = rpi_firmware_property(firmware, + RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID, + &display_id, sizeof(display_id)); + if (ret) { + dev_err(dev, "Failed to get fw property DISPLAY_ID " + "(i = %d)\n", i); + } else { + if (display_id == 2) + enable_hdmi0 = true; + if (display_id == 7) + enable_hdmi1 = true; + } + } + + if (!enable_hdmi0 && enable_hdmi1) { + /* Swap them over and reassign route. This means + * that if we only have one connected, it is always named + * HDMI1, irrespective of if its on port HDMI0 or HDMI1. + * This should match with the naming of HDMI ports in DRM + */ + enable_hdmi0 = true; + enable_hdmi1 = false; + bcm2835_audio_hdmi0.route = AUDIO_DEST_HDMI1; + } + +out_rpi_fw_put: + rpi_firmware_put(firmware); + return; +} + static int snd_bcm2835_alsa_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; int err; + u32 disable_headphones = 0; if (num_channels <= 0 || num_channels > MAX_SUBSTREAMS) { num_channels = MAX_SUBSTREAMS; @@ -279,6 +356,17 @@ static int snd_bcm2835_alsa_probe(struct platform_device *pdev) num_channels); } + if (enable_hdmi && + !of_property_read_bool(dev->of_node, "brcm,disable-hdmi")) + set_hdmi_enables(dev); + + if (enable_headphones) { + of_property_read_u32(dev->of_node, + "brcm,disable-headphones", + &disable_headphones); + enable_headphones = !disable_headphones; + } + err = bcm2835_devm_add_vchi_ctx(dev); if (err) return err; diff --git a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h index 0a81383..fa4228d 100644 --- a/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h +++ b/drivers/staging/vc04_services/bcm2835-audio/bcm2835.h @@ -34,7 +34,8 @@ enum { enum snd_bcm2835_route { AUDIO_DEST_AUTO = 0, AUDIO_DEST_HEADPHONES = 1, - AUDIO_DEST_HDMI = 2, + AUDIO_DEST_HDMI0 = 2, + AUDIO_DEST_HDMI1 = 3, AUDIO_DEST_MAX, }; @@ -59,6 +60,7 @@ struct bcm2835_chip { int volume; int dest; int mute; + int index; unsigned int opened; unsigned int spdif_status; @@ -86,7 +88,7 @@ struct bcm2835_alsa_stream { int snd_bcm2835_new_ctl(struct bcm2835_chip *chip); int snd_bcm2835_new_pcm(struct bcm2835_chip *chip, const char *name, - int idx, enum snd_bcm2835_route route, + enum snd_bcm2835_route route, u32 numchannels, bool spdif); int snd_bcm2835_new_hdmi_ctl(struct bcm2835_chip *chip);