From: Jagan Teki Date: Thu, 15 Jun 2017 12:03:39 +0000 (+0530) Subject: ARM: dts: imx6ul-isiot: Add FEC node support X-Git-Tag: v4.14-rc1~66^2~19^2~44 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4cfad559da170508f96879bc12d039765befcf3e;p=platform%2Fkernel%2Flinux-rpi.git ARM: dts: imx6ul-isiot: Add FEC node support Add support for fec1 node on Engicam Is.IoT variant boards. Cc: Matteo Lisi Cc: Michael Trimarchi Signed-off-by: Jagan Teki Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi index e2dacdc..950fb28 100644 --- a/arch/arm/boot/dts/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -115,6 +115,24 @@ }; }; +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -227,6 +245,21 @@ }; &iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0