From: Denis Zalevskiy Date: Wed, 17 Oct 2018 08:33:27 +0000 (+0200) Subject: board: ge: Move VPD EEPROM configuration to the defconfig X-Git-Tag: v2019.01-rc3~8^2~43 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4c552083503f49f37412972a3b4ea895cffd948e;p=platform%2Fkernel%2Fu-boot.git board: ge: Move VPD EEPROM configuration to the defconfig Use standard configuration logic to define EEPROM constants. Names are based on VPD_EEPROM_ prefix because EEPROM_ is already used by i2c_eeprom driver. Signed-off-by: Denis Zalevskiy Signed-off-by: Fabien Lahoudere --- diff --git a/board/ge/bx50v3/Kconfig b/board/ge/bx50v3/Kconfig index 993b055..0593856 100644 --- a/board/ge/bx50v3/Kconfig +++ b/board/ge/bx50v3/Kconfig @@ -15,4 +15,6 @@ config SYS_SOC config SYS_CONFIG_NAME default "ge_bx50v3" +source "board/ge/common/Kconfig" + endif diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index 7f32af3..13cc4c1 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -38,15 +38,6 @@ struct vpd_cache; static int confidx = 3; /* Default to b850v3. */ static struct vpd_cache vpd; -#ifndef CONFIG_SYS_I2C_EEPROM_ADDR -# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#endif - -#ifndef CONFIG_SYS_I2C_EEPROM_BUS -#define CONFIG_SYS_I2C_EEPROM_BUS 4 -#endif - #define NC_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ PAD_CTL_HYS) @@ -634,11 +625,11 @@ static void process_vpd(struct vpd_cache *vpd) static int read_vpd(void) { int res; - int size = 1024; + static const int size = CONFIG_SYS_VPD_EEPROM_SIZE; uint8_t *data; unsigned int current_i2c_bus = i2c_get_bus_num(); - res = i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS); + res = i2c_set_bus_num(CONFIG_SYS_VPD_EEPROM_I2C_BUS); if (res < 0) return res; @@ -646,8 +637,8 @@ static int read_vpd(void) if (!data) return -ENOMEM; - res = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, data, size); + res = i2c_read(CONFIG_SYS_VPD_EEPROM_I2C_ADDR, 0, + CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN, data, size); if (res == 0) { memset(&vpd, 0, sizeof(vpd)); diff --git a/board/ge/common/Kconfig b/board/ge/common/Kconfig new file mode 100644 index 0000000..637b264 --- /dev/null +++ b/board/ge/common/Kconfig @@ -0,0 +1,14 @@ +config SYS_VPD_EEPROM_I2C_ADDR + hex "I2C address of the EEPROM device used for VPD" + help + VPD = Vital Product Data + +config SYS_VPD_EEPROM_I2C_BUS + int "I2C bus of the EEPROM device used for VPD." + +config SYS_VPD_EEPROM_SIZE + int "Size in bytes of the EEPROM device used for VPD" + +config SYS_VPD_EEPROM_I2C_ADDR_LEN + int "Number of bytes to use for VPD EEPROM address" + default 1 diff --git a/board/ge/mx53ppd/Kconfig b/board/ge/mx53ppd/Kconfig index 6dc3818..bebb2fa 100644 --- a/board/ge/mx53ppd/Kconfig +++ b/board/ge/mx53ppd/Kconfig @@ -13,4 +13,6 @@ config SYS_SOC config SYS_CONFIG_NAME default "mx53ppd" +source "board/ge/common/Kconfig" + endif diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c index 62137f6..3fa53ff 100644 --- a/board/ge/mx53ppd/mx53ppd.c +++ b/board/ge/mx53ppd/mx53ppd.c @@ -40,13 +40,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* Index of I2C1, SEGMENT 1 (see CONFIG_SYS_I2C_BUSES). */ -#define VPD_EEPROM_BUS 2 - -/* Address of 24C08 EEPROM. */ -#define VPD_EEPROM_ADDR 0x50 -#define VPD_EEPROM_ADDR_LEN 1 - static u32 mx53_dram_size[2]; phys_size_t get_effective_memsize(void) @@ -332,11 +325,11 @@ static int read_vpd(void) { struct vpd_cache vpd; int res; - int size = 1024; + static const int size = CONFIG_SYS_VPD_EEPROM_SIZE; u8 *data; unsigned int current_i2c_bus = i2c_get_bus_num(); - res = i2c_set_bus_num(VPD_EEPROM_BUS); + res = i2c_set_bus_num(CONFIG_SYS_VPD_EEPROM_I2C_BUS); if (res < 0) return res; @@ -344,7 +337,8 @@ static int read_vpd(void) if (!data) return -ENOMEM; - res = i2c_read(VPD_EEPROM_ADDR, 0, VPD_EEPROM_ADDR_LEN, data, size); + res = i2c_read(CONFIG_SYS_VPD_EEPROM_I2C_ADDR, 0, + CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN, data, size); if (res == 0) { memset(&vpd, 0, sizeof(vpd)); vpd_reader(size, data, &vpd, vpd_callback); diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig index c907779..a937ce3 100644 --- a/configs/ge_bx50v3_defconfig +++ b/configs/ge_bx50v3_defconfig @@ -8,6 +8,15 @@ CONFIG_FIT=y CONFIG_BOOTDELAY=1 CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y + +# monitor's EEPROM is connected to the bus through the mux channel 1 +# (the number is the offset in CONFIG_SYS_I2C_BUSES) +CONFIG_SYS_VPD_EEPROM_I2C_BUS=4 +# Address of Atmel 24C08 EEPROM +CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50 +CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN=1 +CONFIG_SYS_VPD_EEPROM_SIZE=1024 + CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_LAST_STAGE_INIT=y diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index 34328fd..9c8ed88 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -9,6 +9,16 @@ CONFIG_BOOTDELAY=1 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y + +# monitor's EEPROM is connected to the bus through the mux channel 1 +# (the number is the offset in CONFIG_SYS_I2C_BUSES) +# (there is also Frame EEPROM connected to the channel 4 (bus 4)) +CONFIG_SYS_VPD_EEPROM_I2C_BUS=2 +# Address of Atmel 24C08 EEPROM +CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50 +CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN=1 +CONFIG_SYS_VPD_EEPROM_SIZE=1024 + CONFIG_SUPPORT_RAW_INITRD=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y