From: Enric Balletbo i Serra Date: Fri, 27 Jan 2017 17:43:46 +0000 (+0100) Subject: rtc: bq32000: add support to enable disable the trickle charge FET bypass X-Git-Tag: v4.11-rc1~63^2~19 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4c466872d8ae8e3cdc3e5e1a47e28a15e3020d8b;p=platform%2Fkernel%2Flinux-exynos.git rtc: bq32000: add support to enable disable the trickle charge FET bypass The bq32000 includes a trickle charge circuit to maintain the charge of the backup supply when a super capacitor is used. You can enable the charging circuit by setting 'trickle-resistor-ohms', additionally you can set TCFE to 1 to bypass the internal diode and boost the charge voltage of the backup supply. You might want to enable/disable the TCFE switch from userspace (e.g when device is only connected to a battery) This patch introduces a new sysfs entry to enable and disable this FET form userspace. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Alexandre Belloni --- diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k b/Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k new file mode 100644 index 0000000..398b258 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k @@ -0,0 +1,7 @@ +What: /sys/bus/i2c/devices/.../trickle_charge_bypass +Date: Jan 2017 +KernelVersion: 4.11 +Contact: Enric Balletbo i Serra +Description: Attribute for enable/disable the trickle charge bypass + The trickle_charge_bypass attribute allows the userspace to + enable/disable the Trickle charge FET bypass. diff --git a/drivers/rtc/rtc-bq32k.c b/drivers/rtc/rtc-bq32k.c index 3977424..2b22393 100644 --- a/drivers/rtc/rtc-bq32k.c +++ b/drivers/rtc/rtc-bq32k.c @@ -34,6 +34,7 @@ #define BQ32K_CALIBRATION 0x07 /* CAL_CFG1, calibration and control */ #define BQ32K_TCH2 0x08 /* Trickle charge enable */ #define BQ32K_CFG2 0x09 /* Trickle charger control */ +#define BQ32K_TCFE BIT(6) /* Trickle charge FET bypass */ struct bq32k_regs { uint8_t seconds; @@ -188,6 +189,65 @@ static int trickle_charger_of_init(struct device *dev, struct device_node *node) return 0; } +static ssize_t bq32k_sysfs_show_tricklecharge_bypass(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int reg, error; + + error = bq32k_read(dev, ®, BQ32K_CFG2, 1); + if (error) + return error; + + return sprintf(buf, "%d\n", (reg & BQ32K_TCFE) ? 1 : 0); +} + +static ssize_t bq32k_sysfs_store_tricklecharge_bypass(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int reg, enable, error; + + if (kstrtoint(buf, 0, &enable)) + return -EINVAL; + + error = bq32k_read(dev, ®, BQ32K_CFG2, 1); + if (error) + return error; + + if (enable) { + reg |= BQ32K_TCFE; + error = bq32k_write(dev, ®, BQ32K_CFG2, 1); + if (error) + return error; + + dev_info(dev, "Enabled trickle charge FET bypass.\n"); + } else { + reg &= ~BQ32K_TCFE; + error = bq32k_write(dev, ®, BQ32K_CFG2, 1); + if (error) + return error; + + dev_info(dev, "Disabled trickle charge FET bypass.\n"); + } + + return count; +} + +static DEVICE_ATTR(trickle_charge_bypass, 0644, + bq32k_sysfs_show_tricklecharge_bypass, + bq32k_sysfs_store_tricklecharge_bypass); + +static int bq32k_sysfs_register(struct device *dev) +{ + return device_create_file(dev, &dev_attr_trickle_charge_bypass); +} + +static void bq32k_sysfs_unregister(struct device *dev) +{ + device_remove_file(dev, &dev_attr_trickle_charge_bypass); +} + static int bq32k_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -224,11 +284,26 @@ static int bq32k_probe(struct i2c_client *client, if (IS_ERR(rtc)) return PTR_ERR(rtc); + error = bq32k_sysfs_register(&client->dev); + if (error) { + dev_err(&client->dev, + "Unable to create sysfs entries for rtc bq32000\n"); + return error; + } + + i2c_set_clientdata(client, rtc); return 0; } +static int bq32k_remove(struct i2c_client *client) +{ + bq32k_sysfs_unregister(&client->dev); + + return 0; +} + static const struct i2c_device_id bq32k_id[] = { { "bq32000", 0 }, { } @@ -240,6 +315,7 @@ static struct i2c_driver bq32k_driver = { .name = "bq32k", }, .probe = bq32k_probe, + .remove = bq32k_remove, .id_table = bq32k_id, };