From: Lukasz Majewski <lukma@denx.de>
Date: Fri, 18 Feb 2022 12:28:43 +0000 (+0100)
Subject: arm: dts: Add DTS description for MMC2 am33xx devices
X-Git-Tag: v2022.07~124^2~20^2~3
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4a9099ef1c77c4a166509a811d15694309bd4c17;p=platform%2Fkernel%2Fu-boot.git

arm: dts: Add DTS description for MMC2 am33xx devices

This code has been ported from Linux v5.16.9 arch/arm/boot/dts/am33xx.dtsi
file to allow correct usage of MMC2 controller in U-Boot.

This IP block is a bit specific as it is connected to L3 interconnect bus,
whereas mmc[01] are connected to L4.

Proper configuration of this block (including providing clock) is handled
in ti-sysc.c driver.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
---

diff --git a/arch/arm/dts/am33xx.dtsi b/arch/arm/dts/am33xx.dtsi
index 5f9b306..5871344 100644
--- a/arch/arm/dts/am33xx.dtsi
+++ b/arch/arm/dts/am33xx.dtsi
@@ -42,6 +42,7 @@
 		spi1 = &spi1;
 		mmc0 = &mmc1;
 		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 	};
 
 	cpus {
@@ -303,6 +304,35 @@
 			};
 		};
 
+		target-module@47810000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x478102fc 0x4>,
+			      <0x47810110 0x4>,
+			      <0x47810114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x47810000 0x1000>;
+
+			mmc3: mmc@0 {
+			      compatible = "ti,am335-sdhci";
+			      ti,needs-special-reset;
+			      interrupts = <29>;
+			      reg = <0x0 0x1000>;
+			      status = "disabled";
+			};
+		};
+
 		i2c0: i2c@44e0b000 {
 			compatible = "ti,omap4-i2c";
 			#address-cells = <1>;
@@ -359,15 +389,6 @@
 			status = "disabled";
 		};
 
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <29>;
-			reg = <0x47810000 0x1000>;
-			status = "disabled";
-		};
-
 		wdt2: wdt@44e35000 {
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";