From: Xenia Ragiadakou Date: Sat, 15 Jun 2013 04:29:02 +0000 (+0300) Subject: staging: rtl8192u: fix braces in r819xU_phy.c X-Git-Tag: v3.12-rc1~557^2~94 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4a6094c3171233f1f34ec0dfb233fb9b21e2aecf;p=kernel%2Fkernel-generic.git staging: rtl8192u: fix braces in r819xU_phy.c This patch fixes the brace position and the whitespace around braces. That corrects the following checkpatch errors: ERROR: that open brace { should be on the previous line ERROR: else should follow close brace '}' ERROR: space required after that close brace '}' Also, it removes completely an if(0) statement, instead of correcting its braces. Signed-off-by: Xenia Ragiadakou Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c index 70ab9cd..d1c3f04 100644 --- a/drivers/staging/rtl8192u/r819xU_phy.c +++ b/drivers/staging/rtl8192u/r819xU_phy.c @@ -60,10 +60,9 @@ u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath) { u8 ret = 1; struct r8192_priv *priv = ieee80211_priv(dev); - if (priv->rf_type == RF_2T4R) + if (priv->rf_type == RF_2T4R) { ret = 0; - else if (priv->rf_type == RF_1T2R) - { + } else if (priv->rf_type == RF_1T2R) { if (eRFPath == RF90_PATH_A || eRFPath == RF90_PATH_B) ret = 1; else if (eRFPath == RF90_PATH_C || eRFPath == RF90_PATH_D) @@ -86,14 +85,14 @@ void rtl8192_setBBreg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask, u32 u32 OriginalValue, BitShift, NewValue; - if(dwBitMask!= bMaskDWord) - {//if not "double word" write + if(dwBitMask!= bMaskDWord) { //if not "double word" write read_nic_dword(dev, dwRegAddr, &OriginalValue); BitShift = rtl8192_CalculateBitShift(dwBitMask); NewValue = (((OriginalValue) & (~dwBitMask)) | (dwData << BitShift)); write_nic_dword(dev, dwRegAddr, NewValue); - }else + } else { write_nic_dword(dev, dwRegAddr, dwData); + } return; } /****************************************************************************** @@ -139,30 +138,24 @@ u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, Offset &= 0x3f; //switch page for 8256 RF IC - if (priv->rf_chip == RF_8256) - { - if (Offset >= 31) - { + if (priv->rf_chip == RF_8256) { + if (Offset >= 31) { priv->RfReg0Value[eRFPath] |= 0x140; //Switch to Reg_Mode2 for Reg 31-45 rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) ); //modify offset NewOffset = Offset -30; - } - else if (Offset >= 16) - { + } else if (Offset >= 16) { priv->RfReg0Value[eRFPath] |= 0x100; priv->RfReg0Value[eRFPath] &= (~0x40); //Switch to Reg_Mode 1 for Reg16-30 rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) ); NewOffset = Offset - 15; - } - else + } else { NewOffset = Offset; - } - else - { + } + } else { RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n"); NewOffset = Offset; } @@ -181,8 +174,7 @@ u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, // Switch back to Reg_Mode0; - if(priv->rf_chip == RF_8256) - { + if(priv->rf_chip == RF_8256) { priv->RfReg0Value[eRFPath] &= 0xebf; rtl8192_setBBreg( @@ -225,27 +217,21 @@ void rtl8192_phy_RFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E eRFPath Offset &= 0x3f; //spin_lock_irqsave(&priv->rf_lock, flags); // down(&priv->rf_sem); - if (priv->rf_chip == RF_8256) - { + if (priv->rf_chip == RF_8256) { - if (Offset >= 31) - { + if (Offset >= 31) { priv->RfReg0Value[eRFPath] |= 0x140; rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16)); NewOffset = Offset - 30; - } - else if (Offset >= 16) - { + } else if (Offset >= 16) { priv->RfReg0Value[eRFPath] |= 0x100; priv->RfReg0Value[eRFPath] &= (~0x40); rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16)); NewOffset = Offset - 15; - } - else + } else { NewOffset = Offset; - } - else - { + } + } else { RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n"); NewOffset = Offset; } @@ -261,10 +247,8 @@ void rtl8192_phy_RFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E eRFPath priv->RfReg0Value[eRFPath] = Data; // Switch back to Reg_Mode0; - if(priv->rf_chip == RF_8256) - { - if(Offset != 0) - { + if(priv->rf_chip == RF_8256) { + if(Offset != 0) { priv->RfReg0Value[eRFPath] &= 0xebf; rtl8192_setBBreg( dev, @@ -298,32 +282,29 @@ void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) return; - if (priv->Rf_Mode == RF_OP_By_FW) - { - if (BitMask != bMask12Bits) // RF data is 12 bits only - { + if (priv->Rf_Mode == RF_OP_By_FW) { + if (BitMask != bMask12Bits) { // RF data is 12 bits only Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); BitShift = rtl8192_CalculateBitShift(BitMask); New_Value = ((Original_Value) & (~BitMask)) | (Data<< BitShift); phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value); - }else + } else { phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data); + } udelay(200); - } - else - { - if (BitMask != bMask12Bits) // RF data is 12 bits only - { + } else { + if (BitMask != bMask12Bits) { // RF data is 12 bits only Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr); BitShift = rtl8192_CalculateBitShift(BitMask); New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift)); rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value); - }else + } else { rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, Data); + } } return; } @@ -345,16 +326,13 @@ u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u3 if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) return 0; - if (priv->Rf_Mode == RF_OP_By_FW) - { + if (priv->Rf_Mode == RF_OP_By_FW) { Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); BitShift = rtl8192_CalculateBitShift(BitMask); Readback_Value = (Original_Value & BitMask) >> BitShift; udelay(200); return (Readback_Value); - } - else - { + } else { Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr); BitShift = rtl8192_CalculateBitShift(BitMask); Readback_Value = (Original_Value & BitMask) >> BitShift; @@ -394,33 +372,29 @@ phy_FwRFSerialRead( Data |= 0x80000000; // 6. We can not execute read operation if bit 31 is 1. read_nic_dword(dev, QPNR, &tmp); - while (tmp & 0x80000000) - { + while (tmp & 0x80000000) { // If FW can not finish RF-R/W for more than ?? times. We must reset FW. - if (time++ < 100) - { + if (time++ < 100) { //DbgPrint("FW not finish RF-R Time=%d\n\r", time); udelay(10); read_nic_dword(dev, QPNR, &tmp); - } - else + } else { break; + } } // 7. Execute read operation. write_nic_dword(dev, QPNR, Data); // 8. Check if firmawre send back RF content. read_nic_dword(dev, QPNR, &tmp); - while (tmp & 0x80000000) - { + while (tmp & 0x80000000) { // If FW can not finish RF-R/W for more than ?? times. We must reset FW. - if (time++ < 100) - { + if (time++ < 100) { //DbgPrint("FW not finish RF-W Time=%d\n\r", time); udelay(10); read_nic_dword(dev, QPNR, &tmp); - } - else + } else { return (0); + } } read_nic_dword(dev, RF_DATA, &retValue); @@ -463,17 +437,15 @@ phy_FwRFSerialWrite( // 6. Write operation. We can not write if bit 31 is 1. read_nic_dword(dev, QPNR, &tmp); - while (tmp & 0x80000000) - { + while (tmp & 0x80000000) { // If FW can not finish RF-R/W for more than ?? times. We must reset FW. - if (time++ < 100) - { + if (time++ < 100) { //DbgPrint("FW not finish RF-W Time=%d\n\r", time); udelay(10); read_nic_dword(dev, QPNR, &tmp); - } - else + } else { break; + } } // 7. No matter check bit. We always force the write. Because FW will // not accept the command. @@ -501,22 +473,18 @@ void rtl8192_phy_configmac(struct net_device *dev) u32 *pdwArray = NULL; struct r8192_priv *priv = ieee80211_priv(dev); - if(priv->btxpowerdata_readfromEEPORM) - { + if(priv->btxpowerdata_readfromEEPORM) { RT_TRACE(COMP_PHY, "Rtl819XMACPHY_Array_PG\n"); dwArrayLen = MACPHY_Array_PGLength; pdwArray = rtl819XMACPHY_Array_PG; - } - else - { + } else { RT_TRACE(COMP_PHY, "Rtl819XMACPHY_Array\n"); dwArrayLen = MACPHY_ArrayLength; pdwArray = rtl819XMACPHY_Array; } - for(i = 0; ibInHctTest) - { + if(Adapter->bInHctTest) { PHY_REGArrayLen = PHY_REGArrayLengthDTM; AGCTAB_ArrayLen = AGCTAB_ArrayLengthDTM; Rtl8190PHY_REGArray_Table = Rtl819XPHY_REGArrayDTM; Rtl8190AGCTAB_Array_Table = Rtl819XAGCTAB_ArrayDTM; } #endif - if (ConfigType == BaseBand_Config_PHY_REG) - { - for (i=0; i%s(), CheckBlock:%d\n", __FUNCTION__, CheckBlock); - for(i=0 ; i < CheckTimes ; i++) - { + for(i=0 ; i < CheckTimes ; i++) { // // Write Data to register and readback // - switch (CheckBlock) - { + switch (CheckBlock) { case HW90_BLOCK_MAC: RT_TRACE(COMP_ERR, "PHY_CheckBBRFOK(): Never Write 0x100 here!"); break; @@ -746,8 +706,7 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock, RF9 // // Check whether readback data is correct // - if(dwRegRead != WriteData[i]) - { + if(dwRegRead != WriteData[i]) { RT_TRACE((COMP_PHY|COMP_ERR), "====>error=====dwRegRead: %x, WriteData: %x \n", dwRegRead, WriteData[i]); ret = 1; break; @@ -785,11 +744,9 @@ void rtl8192_BB_Config_ParaFile(struct net_device *dev) /*----Ckeck FPGAPHY0 and PHY1 board is OK----*/ // TODO: this function should be removed on ASIC , Emily 2007.2.2 - for(eCheckItem=(HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem<=HW90_BLOCK_PHY1; eCheckItem++) - { + for(eCheckItem=(HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem<=HW90_BLOCK_PHY1; eCheckItem++) { rtStatus = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path - if(rtStatus != 0) - { + if(rtStatus != 0) { RT_TRACE((COMP_ERR | COMP_PHY), "PHY_RF8256_Config():Check PHY%d Fail!!\n", eCheckItem-1); return ; } @@ -810,8 +767,7 @@ void rtl8192_BB_Config_ParaFile(struct net_device *dev) /*----Enable XSTAL ----*/ write_nic_byte_E(dev, 0x5e, 0x00); - if (priv->card_8192_version == (u8)VERSION_819xU_A) - { + if (priv->card_8192_version == (u8)VERSION_819xU_A) { //Antenna gain offset from B/C/D to A dwRegValue = (priv->AntennaTxPwDiff[1]<<4 | priv->AntennaTxPwDiff[0]); rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC), dwRegValue); @@ -894,8 +850,7 @@ void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel) u8 powerlevel = priv->TxPowerLevelCCK[channel-1]; u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1]; - switch (priv->rf_chip) - { + switch (priv->rf_chip) { case RF_8256: PHY_SetRF8256CCKTxPower(dev, powerlevel); //need further implement PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); @@ -919,8 +874,7 @@ void rtl8192_phy_RFConfig(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); - switch (priv->rf_chip) - { + switch (priv->rf_chip) { case RF_8256: PHY_RF8256_Config(dev); break; @@ -958,11 +912,11 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, RF90_RADIO_PATH_E //u32* pRFArray; u8 ret = 0; - switch (eRFPath){ + switch (eRFPath) { case RF90_PATH_A: - for(i = 0;iTxPowerLevelCCK[channel-1]; u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1]; - switch (priv->rf_chip) - { + switch (priv->rf_chip) { case RF_8225: #ifdef TO_DO_LIST PHY_SetRF8225CckTxPower(Adapter, powerlevel); @@ -1073,11 +1026,9 @@ bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerS priv->SetRFPowerStateInProgress = true; - switch (priv->rf_chip) - { + switch (priv->rf_chip) { case RF_8256: - switch ( eRFPowerState ) - { + switch ( eRFPowerState ) { case eRfOn: //RF-A, RF-B //enable RF-Chip A/B @@ -1127,42 +1078,31 @@ bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerS break; } #ifdef TO_DO_LIST - if(bResult) - { + if(bResult) { // Update current RF state variable. pHalData->eRFPowerState = eRFPowerState; - switch (pHalData->RFChipID ) - { + switch (pHalData->RFChipID ) { case RF_8256: - switch (pHalData->eRFPowerState) - { + switch (pHalData->eRFPowerState) { case eRfOff: // //If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015 // if(pMgntInfo->RfOffReason==RF_CHANGE_BY_IPS ) - { Adapter->HalFunc.LedControlHandler(Adapter,LED_CTL_NO_LINK); - } else - { // Turn off LED if RF is not ON. Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF); - } break; case eRfOn: // Turn on RF we are still linked, which might happen when // we quickly turn off and on HW RF. 2006.05.12, by rcnjko. if( pMgntInfo->bMediaConnect == TRUE ) - { Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK); - } else - { // Turn off LED if RF is not ON. Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK); - } break; default: @@ -1208,13 +1148,11 @@ u8 rtl8192_phy_SetSwChnlCmdArray( { SwChnlCmd *pCmd; - if(CmdTable == NULL) - { + if(CmdTable == NULL) { RT_TRACE(COMP_ERR, "phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n"); return false; } - if(CmdTableIdx >= CmdTableSz) - { + if(CmdTableIdx >= CmdTableSz) { RT_TRACE(COMP_ERR, "phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n", CmdTableIdx, CmdTableSz); return false; @@ -1257,8 +1195,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u RT_TRACE(COMP_CH, "====>%s()====stage:%d, step:%d, channel:%d\n", __FUNCTION__, *stage, *step, channel); // RT_ASSERT(IsLegalChannel(Adapter, channel), ("illegal channel: %d\n", channel)); - if (!IsLegalChannel(priv->ieee80211, channel)) - { + if (!IsLegalChannel(priv->ieee80211, channel)) { RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel); return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop. } @@ -1285,11 +1222,9 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u // <3> Fill up RF dependent command. RfDependCmdCnt = 0; - switch ( priv->rf_chip ) - { + switch ( priv->rf_chip ) { case RF_8225: - if (!(channel >= 1 && channel <= 14)) - { + if (!(channel >= 1 && channel <= 14)) { RT_TRACE(COMP_ERR, "illegal channel for Zebra 8225: %d\n", channel); return true; } @@ -1301,8 +1236,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u case RF_8256: // TEST!! This is not the table for 8256!! - if (!(channel >= 1 && channel <= 14)) - { + if (!(channel >= 1 && channel <= 14)) { RT_TRACE(COMP_ERR, "illegal channel for Zebra 8256: %d\n", channel); return true; } @@ -1322,9 +1256,8 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u } - do{ - switch (*stage) - { + do { + switch (*stage) { case 0: CurrentCmd=&PreCommonCmd[*step]; break; @@ -1336,23 +1269,18 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u break; } - if(CurrentCmd->CmdID==CmdID_End) - { - if((*stage)==2) - { + if(CurrentCmd->CmdID==CmdID_End) { + if((*stage)==2) { (*delay)=CurrentCmd->msDelay; return true; - } - else - { + } else { (*stage)++; (*step)=0; continue; } } - switch (CurrentCmd->CmdID) - { + switch (CurrentCmd->CmdID) { case CmdID_SetTxPowerLevel: if(priv->card_8192_version == (u8)VERSION_819xU_A) //xiong: consider it later! rtl8192_SetTxPowerLevel(dev,channel); @@ -1367,8 +1295,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u write_nic_byte(dev, CurrentCmd->Para1, (u8)CurrentCmd->Para2); break; case CmdID_RF_WriteReg: - for(eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) - { + for(eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) { rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bZebra1_ChannelNum, CurrentCmd->Para2); } break; @@ -1377,7 +1304,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u } break; - }while(true); + } while(true); // }/*for(Number of RF paths)*/ (*delay)=CurrentCmd->msDelay; @@ -1398,8 +1325,7 @@ void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel) struct r8192_priv *priv = ieee80211_priv(dev); u32 delay = 0; - while(!rtl8192_phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay)) - { + while(!rtl8192_phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay)) { // if(delay>0) // msleep(delay);//or mdelay? need further consideration if(!priv->up) @@ -1445,33 +1371,24 @@ u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel) // if(pHalData->SetBWModeInProgress) // return; -if (0) //to test current channel from RF reg 0x7. -{ - u8 eRFPath; - for(eRFPath = 0; eRFPath < 2; eRFPath++){ - printk("====>set channel:%x\n",rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x7, bZebra1_ChannelNum)); - udelay(10); - } -} //-------------------------------------------- - switch (priv->ieee80211->mode) - { + switch (priv->ieee80211->mode) { case WIRELESS_MODE_A: case WIRELESS_MODE_N_5G: - if (channel<=14){ + if (channel<=14) { RT_TRACE(COMP_ERR, "WIRELESS_MODE_A but channel<=14"); return false; } break; case WIRELESS_MODE_B: - if (channel>14){ + if (channel>14) { RT_TRACE(COMP_ERR, "WIRELESS_MODE_B but channel>14"); return false; } break; case WIRELESS_MODE_G: case WIRELESS_MODE_N_24G: - if (channel>14){ + if (channel>14) { RT_TRACE(COMP_ERR, "WIRELESS_MODE_G but channel>14"); return false; } @@ -1520,8 +1437,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"); - if(priv->rf_chip == RF_PSEUDO_11N) - { + if(priv->rf_chip == RF_PSEUDO_11N) { priv->SetBWModeInProgress= false; return; } @@ -1529,8 +1445,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) //<1>Set MAC register read_nic_byte(dev, BW_OPMODE, ®BwOpMode); - switch (priv->CurrentChannelBW) - { + switch (priv->CurrentChannelBW) { case HT_CHANNEL_WIDTH_20: regBwOpMode |= BW_OPMODE_20MHZ; // 2007/02/07 Mark by Emily because we have not verify whether this register works @@ -1549,8 +1464,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) } //<2>Set PHY related register - switch (priv->CurrentChannelBW) - { + switch (priv->CurrentChannelBW) { case HT_CHANNEL_WIDTH_20: // Add by Vivi 20071119 rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0); @@ -1567,18 +1481,15 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) priv->cck_present_attentuation = 0; RT_TRACE(COMP_INIT, "20M, pHalData->CCKPresentAttentuation = %d\n", priv->cck_present_attentuation); - if(priv->chan == 14 && !priv->bcck_in_ch14) - { + if(priv->chan == 14 && !priv->bcck_in_ch14) { priv->bcck_in_ch14 = TRUE; dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); - } - else if(priv->chan != 14 && priv->bcck_in_ch14) - { + } else if(priv->chan != 14 && priv->bcck_in_ch14) { priv->bcck_in_ch14 = FALSE; dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); - } - else + } else { dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); + } break; case HT_CHANNEL_WIDTH_20_40: @@ -1597,18 +1508,15 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) priv->cck_present_attentuation = 0; RT_TRACE(COMP_INIT, "40M, pHalData->CCKPresentAttentuation = %d\n", priv->cck_present_attentuation); - if(priv->chan == 14 && !priv->bcck_in_ch14) - { + if(priv->chan == 14 && !priv->bcck_in_ch14) { priv->bcck_in_ch14 = true; dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); - } - else if(priv->chan!= 14 && priv->bcck_in_ch14) - { + } else if(priv->chan!= 14 && priv->bcck_in_ch14) { priv->bcck_in_ch14 = false; dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); - } - else + } else { dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); + } break; default: @@ -1619,8 +1527,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) //Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315 //<3>Set RF related register - switch ( priv->rf_chip ) - { + switch ( priv->rf_chip ) { case RF_8225: #ifdef TO_DO_LIST PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW); @@ -1688,9 +1595,7 @@ void InitialGain819xUsb(struct net_device *dev, u8 Operation) priv->InitialGainOperateType = Operation; if(priv->up) - { queue_delayed_work(priv->priv_wq,&priv->initialgain_operate_wq,0); - } } extern void InitialGainOperateWorkItemCallBack(struct work_struct *work) @@ -1706,8 +1611,7 @@ extern void InitialGainOperateWorkItemCallBack(struct work_struct *work) Operation = priv->InitialGainOperateType; - switch (Operation) - { + switch (Operation) { case IG_Backup: RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n"); initial_gain = SCAN_RX_INITIAL_GAIN;//priv->DefaultInitialGain[0];//