From: Ian Lance Taylor Date: Thu, 13 Feb 1997 17:25:10 +0000 (+0000) Subject: * config/tc-mips.c (prev_nop_frag): New static variable. X-Git-Tag: gdb-4_18~6475 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4a1cb5078be163068d0fc324a354efbbc46b247f;p=platform%2Fupstream%2Fbinutils.git * config/tc-mips.c (prev_nop_frag): New static variable. (prev_nop_frag_holds): New static variable. (prev_nop_frag_required): New static variable. (prev_nop_frag_since): New static variable. (append_insn): If we aren't reordering, and prev_nop_frag is not NULL, and we don't need any nops, then decrease the size of prev_nop_frag. Don't insert nops because of instructions in noreorder sections. Remember whether the previous instructions where in noreorder sections even when not reordering. (mips_no_prev_insn): Add preserver parameter. Change all callers. Refer prev_nop_frag variables when appropriate. (mips_emit_delays): Set up prev_nop_frag. (s_mipsset): Clear prev_nop_frag if reordering. --- diff --git a/gas/ChangeLog b/gas/ChangeLog index 5e0c673..9065228 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,19 @@ +Thu Feb 13 11:40:58 1997 Ian Lance Taylor + + * config/tc-mips.c (prev_nop_frag): New static variable. + (prev_nop_frag_holds): New static variable. + (prev_nop_frag_required): New static variable. + (prev_nop_frag_since): New static variable. + (append_insn): If we aren't reordering, and prev_nop_frag is not + NULL, and we don't need any nops, then decrease the size of + prev_nop_frag. Don't insert nops because of instructions in + noreorder sections. Remember whether the previous instructions + where in noreorder sections even when not reordering. + (mips_no_prev_insn): Add preserver parameter. Change all + callers. Refer prev_nop_frag variables when appropriate. + (mips_emit_delays): Set up prev_nop_frag. + (s_mipsset): Clear prev_nop_frag if reordering. + Wed Feb 12 14:36:29 1997 Ian Lance Taylor * config/tc-mips.c (append_insn): Remove useless code which diff --git a/gas/config/tc-mips.c b/gas/config/tc-mips.c index 098144e..07441b4 100644 --- a/gas/config/tc-mips.c +++ b/gas/config/tc-mips.c @@ -324,6 +324,22 @@ static int prev_insn_extended; noreorder. */ static int prev_prev_insn_unreordered; +/* If this is set, it points to a frag holding nop instructions which + were inserted before the start of a noreorder section. If those + nops turn out to be unnecessary, the size of the frag can be + decreased. */ +static fragS *prev_nop_frag; + +/* The number of nop instructions we created in prev_nop_frag. */ +static int prev_nop_frag_holds; + +/* The number of nop instructions that we know we need in + prev_nop_frag. */ +static int prev_nop_frag_required; + +/* The number of instructions we've seen since prev_nop_frag. */ +static int prev_nop_frag_since; + /* For ECOFF and ELF, relocations against symbols are done in two parts, with a HI relocation and a LO relocation. Each relocation has only 16 bits of space to store an addend. This means that in @@ -503,7 +519,7 @@ static void append_insn PARAMS ((char *place, expressionS * p, bfd_reloc_code_real_type r, boolean)); -static void mips_no_prev_insn PARAMS ((void)); +static void mips_no_prev_insn PARAMS ((int)); static void mips_emit_delays PARAMS ((boolean)); #ifdef USE_STDARG static void macro_build PARAMS ((char *place, int *counter, expressionS * ep, @@ -961,7 +977,7 @@ md_begin () symbol_table_insert (symbol_new ("$pc", reg_section, -1, &zero_address_frag)); - mips_no_prev_insn (); + mips_no_prev_insn (false); mips_gprmask = 0; mips_cprmask[0] = 0; @@ -1255,8 +1271,10 @@ append_insn (place, ip, address_expr, reloc_type, unmatched_hi) prev_pinfo = prev_insn.insn_mo->pinfo; pinfo = ip->insn_mo->pinfo; - if (place == NULL && ! mips_noreorder) + if (place == NULL && (! mips_noreorder || prev_nop_frag != NULL)) { + int prev_prev_nop; + /* If the previous insn required any delay slots, see if we need to insert a NOP or two. There are eight kinds of possible hazards, of which an instruction can have at most one type. @@ -1394,6 +1412,11 @@ append_insn (place, ip, address_expr, reloc_type, unmatched_hi) nops += 2; } + /* If the previous instruction was in a noreorder section, then + we don't want to insert the nop after all. */ + if (prev_insn_unreordered) + nops = 0; + /* There are two cases which require two intervening instructions: 1) setting the condition codes using a move to coprocessor instruction which requires a general coprocessor @@ -1402,30 +1425,39 @@ append_insn (place, ip, address_expr, reloc_type, unmatched_hi) which have interlocks). If we are not already emitting a NOP instruction, we must check for these cases compared to the instruction previous to the previous instruction. */ - if (nops == 0 - && ((! mips16 - && mips_isa < 4 - && (prev_prev_insn.insn_mo->pinfo & INSN_COPROC_MOVE_DELAY) - && (prev_prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE) - && (pinfo & INSN_READ_COND_CODE) - && ! cop_interlocks) - || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_LO) - && (pinfo & INSN_WRITE_LO) - && ! interlocks) - || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_HI) - && (pinfo & INSN_WRITE_HI) - && ! interlocks))) + if ((! mips16 + && mips_isa < 4 + && (prev_prev_insn.insn_mo->pinfo & INSN_COPROC_MOVE_DELAY) + && (prev_prev_insn.insn_mo->pinfo & INSN_WRITE_COND_CODE) + && (pinfo & INSN_READ_COND_CODE) + && ! cop_interlocks) + || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_LO) + && (pinfo & INSN_WRITE_LO) + && ! interlocks) + || ((prev_prev_insn.insn_mo->pinfo & INSN_READ_HI) + && (pinfo & INSN_WRITE_HI) + && ! interlocks)) + prev_prev_nop = 1; + else + prev_prev_nop = 0; + + if (prev_prev_insn_unreordered) + prev_prev_nop = 0; + + if (prev_prev_nop && nops == 0) ++nops; /* If we are being given a nop instruction, don't bother with one of the nops we would otherwise output. This will only happen when a nop instruction is used with mips_optimize set to 0. */ - if (nops > 0 && ip->insn_opcode == (mips16 ? 0x6500 : 0)) + if (nops > 0 + && ! mips_noreorder + && ip->insn_opcode == (mips16 ? 0x6500 : 0)) --nops; /* Now emit the right number of NOP instructions. */ - if (nops > 0) + if (nops > 0 && ! mips_noreorder) { fragS *old_frag; unsigned long old_frag_offset; @@ -1467,8 +1499,45 @@ append_insn (place, ip, address_expr, reloc_type, unmatched_hi) ecoff_fix_loc (old_frag, old_frag_offset); #endif } + else if (prev_nop_frag != NULL) + { + /* We have a frag holding nops we may be able to remove. If + we don't need any nops, we can decrease the size of + prev_nop_frag by the size of one instruction. If we do + need some nops, we count them in prev_nops_required. */ + if (prev_nop_frag_since == 0) + { + if (nops == 0) + { + prev_nop_frag->fr_fix -= mips16 ? 2 : 4; + --prev_nop_frag_holds; + } + else + prev_nop_frag_required += nops; + } + else + { + if (prev_prev_nop == 0) + { + prev_nop_frag->fr_fix -= mips16 ? 2 : 4; + --prev_nop_frag_holds; + } + else + ++prev_nop_frag_required; + } + + if (prev_nop_frag_holds <= prev_nop_frag_required) + prev_nop_frag = NULL; + + ++prev_nop_frag_since; + + /* Sanity check: by the time we reach the second instruction + after prev_nop_frag, we should have used up all the nops + one way or another. */ + assert (prev_nop_frag_since <= 1 || prev_nop_frag == NULL); + } } - + if (reloc_type > BFD_RELOC_UNUSED) { /* We need to set up a variant frag. */ @@ -1970,8 +2039,11 @@ append_insn (place, ip, address_expr, reloc_type, unmatched_hi) /* We need to record a bit of information even when we are not reordering, in order to determine the base address for mips16 PC relative relocs. */ + prev_prev_insn = prev_insn; prev_insn = *ip; prev_insn_reloc_type = reloc_type; + prev_prev_insn_unreordered = prev_insn_unreordered; + prev_insn_unreordered = 1; } /* We just output an insn, so the next one doesn't have a label. */ @@ -1979,13 +2051,22 @@ append_insn (place, ip, address_expr, reloc_type, unmatched_hi) } /* This function forgets that there was any previous instruction or - label. */ + label. If PRESERVE is non-zero, it remembers enough information to + know whether nops are needed before a noreorder section. */ static void -mips_no_prev_insn () +mips_no_prev_insn (preserve) + int preserve; { - prev_insn.insn_mo = &dummy_opcode; - prev_prev_insn.insn_mo = &dummy_opcode; + if (! preserve) + { + prev_insn.insn_mo = &dummy_opcode; + prev_prev_insn.insn_mo = &dummy_opcode; + prev_nop_frag = NULL; + prev_nop_frag_holds = 0; + prev_nop_frag_required = 0; + prev_nop_frag_since = 0; + } prev_insn_valid = 0; prev_insn_is_delay_slot = 0; prev_insn_unreordered = 0; @@ -2007,9 +2088,9 @@ mips_emit_delays (insns) { if (! mips_noreorder) { - int nop; + int nops; - nop = 0; + nops = 0; if ((! mips16 && mips_isa < 4 && (! cop_interlocks @@ -2027,7 +2108,7 @@ mips_emit_delays (insns) & (INSN_LOAD_MEMORY_DELAY | INSN_COPROC_MEMORY_DELAY)))) { - nop = 1; + ++nops; if ((! mips16 && mips_isa < 4 && (! cop_interlocks @@ -2035,7 +2116,10 @@ mips_emit_delays (insns) || (! interlocks && ((prev_insn.insn_mo->pinfo & INSN_READ_HI) || (prev_insn.insn_mo->pinfo & INSN_READ_LO)))) - emit_nop (); + ++nops; + + if (prev_insn_unreordered) + nops = 0; } else if ((! mips16 && mips_isa < 4 @@ -2044,12 +2128,37 @@ mips_emit_delays (insns) || (! interlocks && ((prev_prev_insn.insn_mo->pinfo & INSN_READ_HI) || (prev_prev_insn.insn_mo->pinfo & INSN_READ_LO)))) - nop = 1; - if (nop) + { + if (! prev_prev_insn_unreordered) + ++nops; + } + + if (nops > 0) { struct insn_label_list *l; - emit_nop (); + if (insns) + { + /* Record the frag which holds the nop instructions, so + that we can remove them if we don't need them. */ + frag_grow (mips16 ? nops * 2 : nops * 4); + prev_nop_frag = frag_now; + prev_nop_frag_holds = nops; + prev_nop_frag_required = 0; + prev_nop_frag_since = 0; + } + + for (; nops > 0; --nops) + emit_nop (); + + if (insns) + { + /* Move on to a new frag, so that it is safe to simply + decrease the size of prev_nop_frag. */ + frag_wane (frag_now); + frag_new (0); + } + for (l = insn_labels; l != NULL; l = l->next) { assert (S_GET_SEGMENT (l->label) == now_seg); @@ -2084,7 +2193,7 @@ mips_emit_delays (insns) } } - mips_no_prev_insn (); + mips_no_prev_insn (insns); } /* Build an instruction created by a macro expansion. This is passed @@ -8068,12 +8177,12 @@ md_parse_option (c, arg) case OPTION_MIPS16: mips16 = 1; - mips_no_prev_insn (); + mips_no_prev_insn (false); break; case OPTION_NO_MIPS16: mips16 = 0; - mips_no_prev_insn (); + mips_no_prev_insn (false); break; case OPTION_MEMBEDDED_PIC: @@ -8996,10 +9105,13 @@ s_mipsset (x) if (strcmp (name, "reorder") == 0) { - if (mips_noreorder) + if (mips_noreorder && prev_nop_frag != NULL) { - prev_insn_unreordered = 1; - prev_prev_insn_unreordered = 1; + /* If we still have pending nops, we can discard them. The + usual nop handling will insert any that are still + needed. */ + prev_nop_frag->fr_fix -= prev_nop_frag_holds * (mips16 ? 2 : 4); + prev_nop_frag = NULL; } mips_noreorder = 0; }