From: Jianlong Huang <jianlong.huang@starfivetech.com>
Date: Thu, 30 Jun 2022 07:03:27 +0000 (+0800)
Subject: dts: starfive: Fix sdio1 config
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=49aca1e7374d8c4359f268bcb00891cf0b1eb018;p=platform%2Fkernel%2Flinux-starfive.git

dts: starfive: Fix sdio1 config

Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
---

diff --git a/arch/riscv/boot/dts/starfive/evb-overlay/jh7110-evb-overlay-rgb2hdmi.dts b/arch/riscv/boot/dts/starfive/evb-overlay/jh7110-evb-overlay-rgb2hdmi.dts
index 1593bc2..0397240 100644
--- a/arch/riscv/boot/dts/starfive/evb-overlay/jh7110-evb-overlay-rgb2hdmi.dts
+++ b/arch/riscv/boot/dts/starfive/evb-overlay/jh7110-evb-overlay-rgb2hdmi.dts
@@ -6,7 +6,7 @@
 	compatible = "starfive,jh7110";
 
 	//hdmi_output
-  	fragment@2 {
+	fragment@0 {
 		target-path = "/soc/tda988x_pin";
 		__overlay__ {
 			status = "okay";
@@ -14,7 +14,7 @@
 	};
 
 	//uart1
-	fragment@3 {
+	fragment@1 {
 		target-path = "/soc/serial@10010000";
 		__overlay__ {
 			status = "okay";
diff --git a/arch/riscv/boot/dts/starfive/evb-overlay/jh7110-evb-overlay-sdio.dts b/arch/riscv/boot/dts/starfive/evb-overlay/jh7110-evb-overlay-sdio.dts
index 80b7256..b2ad0b1 100644
--- a/arch/riscv/boot/dts/starfive/evb-overlay/jh7110-evb-overlay-sdio.dts
+++ b/arch/riscv/boot/dts/starfive/evb-overlay/jh7110-evb-overlay-sdio.dts
@@ -82,16 +82,8 @@
 		};
 	};
 
-	//usbdrd30
-	fragment@4 {
-		target-path = "/soc/usbdrd";
-		__overlay__ {
-			status = "disabled";
-		};
-	};
-
 	//sdio1
-	fragment@5 {
+	fragment@3 {
 		target-path = "/soc/sdio1@16020000";
 		__overlay__ {
 			clock-frequency = <102400000>;
diff --git a/arch/riscv/boot/dts/starfive/jh7110-evb-pcie-i2s-sd.dts b/arch/riscv/boot/dts/starfive/jh7110-evb-pcie-i2s-sd.dts
index 1aef330..0ac88af 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-evb-pcie-i2s-sd.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-evb-pcie-i2s-sd.dts
@@ -32,17 +32,12 @@
 };
 
 &sdio1 {
-	clock-frequency = <4000000>;
-	max-frequency = <1000000>;
+	clock-frequency = <102400000>;
+	max-frequency = <100000000>;
 	card-detect-delay = <300>;
 	bus-width = <4>;
+	broken-cd;
 	cap-sd-highspeed;
-	cap-sdio-irq;
-	cap-mmc-hw-reset;
-	non-removable;
-	enable-sdio-wakeup;
-	keep-power-in-suspend;
-	cap-mmc-highspeed;
 	post-power-on-delay-ms = <200>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdcard1_pins>;