From: Alison Wang <b18965@freescale.com>
Date: Mon, 11 May 2015 07:39:47 +0000 (+0800)
Subject: arm: ls1021a: Remove the inappropriate use of the function 'sprintf'
X-Git-Tag: v2015.10-rc1~183^2~14
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=49a5e42a780dadf69fcac177143b0c8619ec467b;p=platform%2Fkernel%2Fu-boot.git

arm: ls1021a: Remove the inappropriate use of the function 'sprintf'

As the function 'sprintf' does not check buffer boundaries but outputs
to the buffer 'enet' of fixed size (16), this patch removes the function
'sprintf', and uses 'strcpy' instead. It will assign the character
arrays 'enet' and 'phy' the corresponding character strings.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>
---

diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
index 71a1753..e01d911 100644
--- a/arch/arm/cpu/armv7/ls102xa/fdt.c
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -29,29 +29,30 @@ void ft_fixup_enet_phy_connect_type(void *fdt)
 	char phy[16];
 	int phy_node;
 	int i = 0;
-	int enet_id = 0;
 	uint32_t ph;
 
 	while ((dev = eth_get_dev_by_index(i++)) != NULL) {
-		if (strstr(dev->name, "eTSEC1"))
-			enet_id = 0;
-		else if (strstr(dev->name, "eTSEC2"))
-			enet_id = 1;
-		else if (strstr(dev->name, "eTSEC3"))
-			enet_id = 2;
-		else
+		if (strstr(dev->name, "eTSEC1")) {
+			strcpy(enet, "ethernet0");
+			strcpy(phy, "enet0_rgmii_phy");
+		} else if (strstr(dev->name, "eTSEC2")) {
+			strcpy(enet, "ethernet1");
+			strcpy(phy, "enet1_rgmii_phy");
+		} else if (strstr(dev->name, "eTSEC3")) {
+			strcpy(enet, "ethernet2");
+			strcpy(phy, "enet2_rgmii_phy");
+		} else {
 			continue;
+		}
 
 		priv = dev->priv;
 		if (priv->flags & TSEC_SGMII)
 			continue;
 
-		sprintf(enet, "ethernet%d", enet_id);
 		enet_path = fdt_get_alias(fdt, enet);
 		if (!enet_path)
 			continue;
 
-		sprintf(phy, "enet%d_rgmii_phy", enet_id);
 		phy_path = fdt_get_alias(fdt, phy);
 		if (!phy_path)
 			continue;