From: Darrick J. Wong Date: Sun, 29 Jul 2018 19:36:00 +0000 (-0400) Subject: ext4: convert ext4.rst to restructuredtext format X-Git-Tag: v4.19~171^2~44 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=489fcb912477e4f4ba5fb65b223331fb8d352a07;p=platform%2Fkernel%2Flinux-rpi3.git ext4: convert ext4.rst to restructuredtext format Convert the existing ext4 documentation into rst format and link it in with the rest of the kernel documentation. Signed-off-by: Darrick J. Wong Signed-off-by: Theodore Ts'o --- diff --git a/Documentation/filesystems/ext4/ext4.rst b/Documentation/filesystems/ext4/ext4.rst index 7f628b9..47f614c 100644 --- a/Documentation/filesystems/ext4/ext4.rst +++ b/Documentation/filesystems/ext4/ext4.rst @@ -1,6 +1,8 @@ +.. SPDX-License-Identifier: GPL-2.0 -Ext4 Filesystem -=============== +======================== +General Information +======================== Ext4 is an advanced level of the ext3 filesystem which incorporates scalability and reliability enhancements for supporting large filesystems @@ -11,18 +13,18 @@ Mailing list: linux-ext4@vger.kernel.org Web site: http://ext4.wiki.kernel.org -1. Quick usage instructions: -=========================== +Quick usage instructions +======================== Note: More extensive information for getting started with ext4 can be - found at the ext4 wiki site at the URL: - http://ext4.wiki.kernel.org/index.php/Ext4_Howto +found at the ext4 wiki site at the URL: +http://ext4.wiki.kernel.org/index.php/Ext4_Howto - Compile and install the latest version of e2fsprogs (as of this writing version 1.41.3) from: http://sourceforge.net/project/showfiles.php?group_id=2406 - + or https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/ @@ -37,16 +39,16 @@ Note: More extensive information for getting started with ext4 can be you will need to merge your changes with the version from e2fsprogs 1.41.x. - - Create a new filesystem using the ext4 filesystem type: + - Create a new filesystem using the ext4 filesystem type::: - # mke2fs -t ext4 /dev/hda1 + # mke2fs -t ext4 /dev/hda1 - Or to configure an existing ext3 filesystem to support extents: + Or to configure an existing ext3 filesystem to support extents::: # tune2fs -O extents /dev/hda1 If the filesystem was created with 128 byte inodes, it can be - converted to use 256 byte for greater efficiency via: + converted to use 256 byte for greater efficiency via::: # tune2fs -I 256 /dev/hda1 @@ -54,7 +56,7 @@ Note: More extensive information for getting started with ext4 can be filesystem back to ext3; so please do not do try this on production filesystems.) - - Mounting: + - Mounting::: # mount -t ext4 /dev/hda1 /wherever @@ -75,10 +77,11 @@ Note: More extensive information for getting started with ext4 can be the filesystem with a large journal can also be helpful for metadata-intensive workloads. -2. Features -=========== +Features +======== -2.1 Currently available +Currently Available +------------------- * ability to use filesystems > 16TB (e2fsprogs support not available yet) * extent format reduces metadata overhead (RAM, IO for access, transactions) @@ -103,7 +106,8 @@ Note: More extensive information for getting started with ext4 can be [1] Filesystems with a block size of 1k may see a limit imposed by the directory hash tree having a maximum depth of two. -2.2 Candidate features for future inclusion +Candidate Features for Future Inclusion +--------------------------------------- * online defrag (patches available but not well tested) * reduced mke2fs time via lazy itable initialization in conjunction with @@ -122,12 +126,15 @@ grouping of bitmaps and inode tables. Some test results available here: - http://www.bullopensource.org/ext4/20080818-ffsb/ffsb-write-2.6.27-rc1.html - http://www.bullopensource.org/ext4/20080818-ffsb/ffsb-readwrite-2.6.27-rc1.html -3. Options -========== +Options +======= When mounting an ext4 filesystem, the following option are accepted: (*) == default +======================= ======================================================= +Mount Option Description +======================= ======================================================= ro Mount filesystem read only. Note that ext4 will replay the journal (and thus write to the partition) even when mounted "read only". The @@ -387,33 +394,38 @@ i_version Enable 64-bit inode version support. This option is dax Use direct access (no page cache). See Documentation/filesystems/dax.txt. Note that this option is incompatible with data=journal. +======================= ======================================================= Data Mode ========= There are 3 different data modes: * writeback mode -In data=writeback mode, ext4 does not journal data at all. This mode provides -a similar level of journaling as that of XFS, JFS, and ReiserFS in its default -mode - metadata journaling. A crash+recovery can cause incorrect data to -appear in files which were written shortly before the crash. This mode will -typically provide the best ext4 performance. + + In data=writeback mode, ext4 does not journal data at all. This mode provides + a similar level of journaling as that of XFS, JFS, and ReiserFS in its default + mode - metadata journaling. A crash+recovery can cause incorrect data to + appear in files which were written shortly before the crash. This mode will + typically provide the best ext4 performance. * ordered mode -In data=ordered mode, ext4 only officially journals metadata, but it logically -groups metadata information related to data changes with the data blocks into a -single unit called a transaction. When it's time to write the new metadata -out to disk, the associated data blocks are written first. In general, -this mode performs slightly slower than writeback but significantly faster than journal mode. + + In data=ordered mode, ext4 only officially journals metadata, but it logically + groups metadata information related to data changes with the data blocks into + a single unit called a transaction. When it's time to write the new metadata + out to disk, the associated data blocks are written first. In general, this + mode performs slightly slower than writeback but significantly faster than + journal mode. * journal mode -data=journal mode provides full data and metadata journaling. All new data is -written to the journal first, and then to its final location. -In the event of a crash, the journal can be replayed, bringing both data and -metadata into a consistent state. This mode is the slowest except when data -needs to be read from and written to disk at the same time where it -outperforms all others modes. Enabling this mode will disable delayed -allocation and O_DIRECT support. + + data=journal mode provides full data and metadata journaling. All new data is + written to the journal first, and then to its final location. In the event of + a crash, the journal can be replayed, bringing both data and metadata into a + consistent state. This mode is the slowest except when data needs to be read + from and written to disk at the same time where it outperforms all others + modes. Enabling this mode will disable delayed allocation and O_DIRECT + support. /proc entries ============= @@ -425,10 +437,12 @@ Information about mounted ext4 file systems can be found in in table below. Files in /proc/fs/ext4/ -.............................................................................. + +================ ======= File Content +================ ======= mb_groups details of multiblock allocator buddy cache of free blocks -.............................................................................. +================ ======= /sys entries ============ @@ -439,28 +453,30 @@ Information about mounted ext4 file systems can be found in /sys/fs/ext4/dm-0). The files in each per-device directory are shown in table below. -Files in /sys/fs/ext4/ +Files in /sys/fs/ext4/: + (see also Documentation/ABI/testing/sysfs-fs-ext4) -.............................................................................. - File Content +============================= ================================================= +File Content +============================= ================================================= delayed_allocation_blocks This file is read-only and shows the number of blocks that are dirty in the page cache, but which do not have their location in the filesystem allocated yet. - inode_goal Tuning parameter which (if non-zero) controls +inode_goal Tuning parameter which (if non-zero) controls the goal inode used by the inode allocator in preference to all other allocation heuristics. This is intended for debugging use only, and should be 0 on production systems. - inode_readahead_blks Tuning parameter which controls the maximum +inode_readahead_blks Tuning parameter which controls the maximum number of inode table blocks that ext4's inode table readahead algorithm will pre-read into the buffer cache - lifetime_write_kbytes This file is read-only and shows the number of +lifetime_write_kbytes This file is read-only and shows the number of kilobytes of data that have been written to this filesystem since it was created. @@ -508,7 +524,7 @@ Files in /sys/fs/ext4/ in the file system. If there is not enough space for the reserved space when mounting the file mount will _not_ fail. -.............................................................................. +============================= ================================================= Ioctls ====== @@ -518,8 +534,10 @@ through the system call interfaces. The list of all Ext4 specific ioctls are shown in the table below. Table of Ext4 specific ioctls -.............................................................................. - Ioctl Description + +============================= ================================================= +Ioctl Description +============================= ================================================= EXT4_IOC_GETFLAGS Get additional attributes associated with inode. The ioctl argument is an integer bitfield, with bit values described in ext4.h. This ioctl is an @@ -610,8 +628,7 @@ Table of Ext4 specific ioctls normal user by accident. The data blocks of the previous boot loader will be associated with the given inode. - -.............................................................................. +============================= ================================================= References ========== diff --git a/Documentation/filesystems/ext4/index.rst b/Documentation/filesystems/ext4/index.rst new file mode 100644 index 0000000..1270b34 --- /dev/null +++ b/Documentation/filesystems/ext4/index.rst @@ -0,0 +1,16 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==== +ext4 +==== + +General usage and on-disk artifacts writen by ext4. More documentation may +be ported from the wiki as time permits. This should be considered the +canonical source of information as the details here have been reviewed by +the ext4 community. + +.. toctree:: + :maxdepth: 5 + :numbered: + + ext4 diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst index 53b89d0..7c57b39 100644 --- a/Documentation/filesystems/index.rst +++ b/Documentation/filesystems/index.rst @@ -2,6 +2,14 @@ Linux Filesystems API ===================== +The documentation in this section are provided by specific filesystem +subprojects. + +.. toctree:: + :maxdepth: 2 + + ext4/index + The Linux VFS =============