From: Patrick Delaunay Date: Mon, 15 Nov 2021 14:32:28 +0000 (+0100) Subject: stm32mp1: ram: add read valid training support X-Git-Tag: v2022.07~227^2~23^2~13 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4831ba2903d886d233400423c2a425fde170b367;p=platform%2Fkernel%2Fu-boot.git stm32mp1: ram: add read valid training support Add the read data eye training = training for optimal read valid placement (RVTRN) when the built-in calibration is executed for LPDDR2 and LPDDR3. This training is supported on the PUBL integrated in the STM32MP15x DDR subsystem and it is not required for DDR3. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.c b/drivers/ram/stm32mp1/stm32mp1_ddr.c index 0457166..1f84225 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.c +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.c @@ -826,8 +826,12 @@ start: */ /* 10. configure PUBL PIR register to specify which training step to run */ - /* warning : RVTRN is not supported by this PUBL */ - stm32mp1_ddrphy_init(priv->phy, DDRPHYC_PIR_QSTRN); + /* RVTRN is excuted only on LPDDR2/LPDDR3 */ + if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3) + pir = DDRPHYC_PIR_QSTRN; + else + pir = DDRPHYC_PIR_QSTRN | DDRPHYC_PIR_RVTRN; + stm32mp1_ddrphy_init(priv->phy, pir); /* 11. monitor PUB PGSR.IDONE to poll cpmpletion of training sequence */ ddrphy_idone_wait(priv->phy); diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h index 3c8885a..ada3087 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h +++ b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h @@ -309,6 +309,7 @@ struct stm32mp1_ddrphy { #define DDRPHYC_PIR_DRAMRST BIT(5) #define DDRPHYC_PIR_DRAMINIT BIT(6) #define DDRPHYC_PIR_QSTRN BIT(7) +#define DDRPHYC_PIR_RVTRN BIT(8) #define DDRPHYC_PIR_ICPC BIT(16) #define DDRPHYC_PIR_ZCALBYP BIT(30) #define DDRPHYC_PIR_INITSTEPS_MASK GENMASK(31, 7)