From: Rafał Miłecki <rafal@milecki.pl>
Date: Sun, 28 Apr 2019 21:38:26 +0000 (+0200)
Subject: brcmfmac: print firmware messages after a firmware crash
X-Git-Tag: v5.4-rc1~1056^2~37^2~5
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=47dd82e3d25e85a7c7c4e4b0eac9d297d1e5e2d4;p=platform%2Fkernel%2Flinux-rpi.git

brcmfmac: print firmware messages after a firmware crash

Normally firmware messages are printed with debugging enabled only. It's
a good idea as firmware may print a lot of messages that normal users
don't need to care about.

However, on firmware crash, it may be very helpful to log all recent
messages. There is almost always a backtrace available as well as rought
info on the latest actions/state.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index d7d3e93..83e4938 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -764,15 +764,22 @@ static void brcmf_pcie_bus_console_init(struct brcmf_pciedev_info *devinfo)
 		  console->base_addr, console->buf_addr, console->bufsize);
 }
 
-
-static void brcmf_pcie_bus_console_read(struct brcmf_pciedev_info *devinfo)
+/**
+ * brcmf_pcie_bus_console_read - reads firmware messages
+ *
+ * @error: specifies if error has occurred (prints messages unconditionally)
+ */
+static void brcmf_pcie_bus_console_read(struct brcmf_pciedev_info *devinfo,
+					bool error)
 {
+	struct pci_dev *pdev = devinfo->pdev;
+	struct brcmf_bus *bus = dev_get_drvdata(&pdev->dev);
 	struct brcmf_pcie_console *console;
 	u32 addr;
 	u8 ch;
 	u32 newidx;
 
-	if (!BRCMF_FWCON_ON())
+	if (!error && !BRCMF_FWCON_ON())
 		return;
 
 	console = &devinfo->shared.console;
@@ -796,7 +803,10 @@ static void brcmf_pcie_bus_console_read(struct brcmf_pciedev_info *devinfo)
 		}
 		if (ch == '\n') {
 			console->log_str[console->log_idx] = 0;
-			pr_debug("CONSOLE: %s", console->log_str);
+			if (error)
+				brcmf_err(bus, "CONSOLE: %s", console->log_str);
+			else
+				pr_debug("CONSOLE: %s", console->log_str);
 			console->log_idx = 0;
 		}
 	}
@@ -857,7 +867,7 @@ static irqreturn_t brcmf_pcie_isr_thread(int irq, void *arg)
 							&devinfo->pdev->dev);
 		}
 	}
-	brcmf_pcie_bus_console_read(devinfo);
+	brcmf_pcie_bus_console_read(devinfo, false);
 	if (devinfo->state == BRCMFMAC_PCIE_STATE_UP)
 		brcmf_pcie_intr_enable(devinfo);
 	devinfo->in_irq = false;
@@ -1426,6 +1436,8 @@ static int brcmf_pcie_reset(struct device *dev)
 	struct brcmf_fw_request *fwreq;
 	int err;
 
+	brcmf_pcie_bus_console_read(devinfo, true);
+
 	brcmf_detach(dev);
 
 	brcmf_pcie_release_irq(devinfo);
@@ -1818,7 +1830,7 @@ static void brcmf_pcie_setup(struct device *dev, int ret,
 	if (brcmf_attach(&devinfo->pdev->dev, devinfo->settings) == 0)
 		return;
 
-	brcmf_pcie_bus_console_read(devinfo);
+	brcmf_pcie_bus_console_read(devinfo, false);
 
 fail:
 	device_release_driver(dev);