From: Larry Finger Date: Fri, 4 May 2007 01:01:02 +0000 (-0500) Subject: [PATCH] bcm43xx: Remove dead configuration variable CONFIG_947XX X-Git-Tag: v3.12-rc1~29685^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=47c93d2faf9d7e94393852823480ea61c868caee;p=kernel%2Fkernel-generic.git [PATCH] bcm43xx: Remove dead configuration variable CONFIG_947XX The CONFIG_BCM947XX configuration variable was designed for use by the embedded device used by the OpenWRT project. The device has been shifted to the ssb driver in bcm43xx-mac80211 and will not be used with SoftMAC. Accordingly, this "dead" configuration variable is removed. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h index f8483c1..10e07e8 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx.h @@ -658,12 +658,6 @@ struct bcm43xx_pio { #define BCM43xx_MAX_80211_CORES 2 -#ifdef CONFIG_BCM947XX -#define core_offset(bcm) (bcm)->current_core_offset -#else -#define core_offset(bcm) 0 -#endif - /* Generic information about a core. */ struct bcm43xx_coreinfo { u8 available:1, @@ -789,10 +783,6 @@ struct bcm43xx_private { /* The currently active core. */ struct bcm43xx_coreinfo *current_core; -#ifdef CONFIG_BCM947XX - /** current core memory offset */ - u32 current_core_offset; -#endif struct bcm43xx_coreinfo *active_80211_core; /* coreinfo structs for all possible cores follow. * Note that a core might not exist. @@ -943,25 +933,25 @@ struct bcm43xx_lopair * bcm43xx_get_lopair(struct bcm43xx_phyinfo *phy, static inline u16 bcm43xx_read16(struct bcm43xx_private *bcm, u16 offset) { - return ioread16(bcm->mmio_addr + core_offset(bcm) + offset); + return ioread16(bcm->mmio_addr + offset); } static inline void bcm43xx_write16(struct bcm43xx_private *bcm, u16 offset, u16 value) { - iowrite16(value, bcm->mmio_addr + core_offset(bcm) + offset); + iowrite16(value, bcm->mmio_addr + offset); } static inline u32 bcm43xx_read32(struct bcm43xx_private *bcm, u16 offset) { - return ioread32(bcm->mmio_addr + core_offset(bcm) + offset); + return ioread32(bcm->mmio_addr + offset); } static inline void bcm43xx_write32(struct bcm43xx_private *bcm, u16 offset, u32 value) { - iowrite32(value, bcm->mmio_addr + core_offset(bcm) + offset); + iowrite32(value, bcm->mmio_addr + offset); } static inline diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c index e3d2e61..1f7731f 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c @@ -660,10 +660,6 @@ struct bcm43xx_dmaring * bcm43xx_setup_dmaring(struct bcm43xx_private *bcm, ring->routing = BCM43xx_DMA32_CLIENTTRANS; if (dma64) ring->routing = BCM43xx_DMA64_CLIENTTRANS; -#ifdef CONFIG_BCM947XX - if (bcm->pci_dev->bus->number == 0) - ring->routing = dma64 ? BCM43xx_DMA64_NOTRANS : BCM43xx_DMA32_NOTRANS; -#endif ring->bcm = bcm; ring->nr_slots = nr_slots; diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index 5e96bca..ef6b253 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -61,10 +61,6 @@ MODULE_AUTHOR("Stefano Brivio"); MODULE_AUTHOR("Michael Buesch"); MODULE_LICENSE("GPL"); -#ifdef CONFIG_BCM947XX -extern char *nvram_get(char *name); -#endif - #if defined(CONFIG_BCM43XX_DMA) && defined(CONFIG_BCM43XX_PIO) static int modparam_pio; module_param_named(pio, modparam_pio, int, 0444); @@ -142,10 +138,6 @@ MODULE_PARM_DESC(fwpostfix, "Postfix for .fw files. Useful for using multiple fi { PCI_VENDOR_ID_BROADCOM, 0x4324, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Broadcom 43XG 802.11b/g */ { PCI_VENDOR_ID_BROADCOM, 0x4325, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, -#ifdef CONFIG_BCM947XX - /* SB bus on BCM947xx */ - { PCI_VENDOR_ID_BROADCOM, 0x0800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, -#endif { 0 }, }; MODULE_DEVICE_TABLE(pci, bcm43xx_pci_tbl); @@ -786,9 +778,6 @@ static int bcm43xx_sprom_extract(struct bcm43xx_private *bcm) { u16 value; u16 *sprom; -#ifdef CONFIG_BCM947XX - char *c; -#endif sprom = kzalloc(BCM43xx_SPROM_SIZE * sizeof(u16), GFP_KERNEL); @@ -796,28 +785,7 @@ static int bcm43xx_sprom_extract(struct bcm43xx_private *bcm) printk(KERN_ERR PFX "sprom_extract OOM\n"); return -ENOMEM; } -#ifdef CONFIG_BCM947XX - sprom[BCM43xx_SPROM_BOARDFLAGS2] = atoi(nvram_get("boardflags2")); - sprom[BCM43xx_SPROM_BOARDFLAGS] = atoi(nvram_get("boardflags")); - - if ((c = nvram_get("il0macaddr")) != NULL) - e_aton(c, (char *) &(sprom[BCM43xx_SPROM_IL0MACADDR])); - - if ((c = nvram_get("et1macaddr")) != NULL) - e_aton(c, (char *) &(sprom[BCM43xx_SPROM_ET1MACADDR])); - - sprom[BCM43xx_SPROM_PA0B0] = atoi(nvram_get("pa0b0")); - sprom[BCM43xx_SPROM_PA0B1] = atoi(nvram_get("pa0b1")); - sprom[BCM43xx_SPROM_PA0B2] = atoi(nvram_get("pa0b2")); - - sprom[BCM43xx_SPROM_PA1B0] = atoi(nvram_get("pa1b0")); - sprom[BCM43xx_SPROM_PA1B1] = atoi(nvram_get("pa1b1")); - sprom[BCM43xx_SPROM_PA1B2] = atoi(nvram_get("pa1b2")); - - sprom[BCM43xx_SPROM_BOARDREV] = atoi(nvram_get("boardrev")); -#else bcm43xx_sprom_read(bcm, sprom); -#endif /* boardflags2 */ value = sprom[BCM43xx_SPROM_BOARDFLAGS2]; @@ -1225,12 +1193,6 @@ static int _switch_core(struct bcm43xx_private *bcm, int core) goto error; udelay(10); } -#ifdef CONFIG_BCM947XX - if (bcm->pci_dev->bus->number == 0) - bcm->current_core_offset = 0x1000 * core; - else - bcm->current_core_offset = 0; -#endif return 0; error: @@ -1387,19 +1349,6 @@ void bcm43xx_wireless_core_reset(struct bcm43xx_private *bcm, int connect_phy) if ((bcm43xx_core_enabled(bcm)) && !bcm43xx_using_pio(bcm)) { -//FIXME: Do we _really_ want #ifndef CONFIG_BCM947XX here? -#if 0 -#ifndef CONFIG_BCM947XX - /* reset all used DMA controllers. */ - bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA1_BASE); - bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA2_BASE); - bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA3_BASE); - bcm43xx_dmacontroller_tx_reset(bcm, BCM43xx_MMIO_DMA4_BASE); - bcm43xx_dmacontroller_rx_reset(bcm, BCM43xx_MMIO_DMA1_BASE); - if (bcm->current_core->rev < 5) - bcm43xx_dmacontroller_rx_reset(bcm, BCM43xx_MMIO_DMA4_BASE); -#endif -#endif } if (bcm43xx_status(bcm) == BCM43xx_STAT_SHUTTINGDOWN) { bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, @@ -2140,32 +2089,11 @@ out: return err; } -#ifdef CONFIG_BCM947XX -static struct pci_device_id bcm43xx_47xx_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, - { 0 } -}; -#endif - static int bcm43xx_initialize_irq(struct bcm43xx_private *bcm) { int err; bcm->irq = bcm->pci_dev->irq; -#ifdef CONFIG_BCM947XX - if (bcm->pci_dev->bus->number == 0) { - struct pci_dev *d; - struct pci_device_id *id; - for (id = bcm43xx_47xx_ids; id->vendor; id++) { - d = pci_get_device(id->vendor, id->device, NULL); - if (d != NULL) { - bcm->irq = d->irq; - pci_dev_put(d); - break; - } - } - } -#endif err = request_irq(bcm->irq, bcm43xx_interrupt_handler, IRQF_SHARED, KBUILD_MODNAME, bcm); if (err) @@ -2645,10 +2573,6 @@ static int bcm43xx_probe_cores(struct bcm43xx_private *bcm) chip_id_16 = 0x4610; else if ((pci_device >= 0x4710) && (pci_device <= 0x4715)) chip_id_16 = 0x4710; -#ifdef CONFIG_BCM947XX - else if ((pci_device >= 0x4320) && (pci_device <= 0x4325)) - chip_id_16 = 0x4309; -#endif else { printk(KERN_ERR PFX "Could not determine Chip ID\n"); return -ENODEV; @@ -4144,11 +4068,6 @@ static int __devinit bcm43xx_init_one(struct pci_dev *pdev, struct bcm43xx_private *bcm; int err; -#ifdef CONFIG_BCM947XX - if ((pdev->bus->number == 0) && (pdev->device != 0x0800)) - return -ENODEV; -#endif - #ifdef DEBUG_SINGLE_DEVICE_ONLY if (strcmp(pci_name(pdev), DEBUG_SINGLE_DEVICE_ONLY)) return -ENODEV; diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.h b/drivers/net/wireless/bcm43xx/bcm43xx_main.h index f763571..c8f3c53 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.h @@ -33,25 +33,6 @@ #include "bcm43xx.h" -#ifdef CONFIG_BCM947XX -#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0) - -static inline void e_aton(char *str, char *dest) -{ - int i = 0; - u16 *d = (u16 *) dest; - - for (;;) { - dest[i++] = (char) simple_strtoul(str, NULL, 16); - str += 2; - if (!*str++ || i == 6) - break; - } - for (i = 0; i < 3; i++) - d[i] = cpu_to_be16(d[i]); -} -#endif - #define P4D_BYT3S(magic, nr_bytes) u8 __p4dding##magic[nr_bytes] #define P4D_BYTES(line, nr_bytes) P4D_BYT3S(line, nr_bytes) /* Magic helper macro to pad structures. Ignore those above. It's magic. */