From: Weijie Gao Date: Tue, 27 Aug 2019 07:32:19 +0000 (+0800) Subject: mmc: invalidate block cache after hwpart switched successfully X-Git-Tag: v2019.10-rc4~27^2~6 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=47b7fa30c419896a9ecd0ab957dad55d61310e08;p=platform%2Fkernel%2Fu-boot.git mmc: invalidate block cache after hwpart switched successfully eMMC device has multiple hw partitions both address from zero. However the mmc driver lacks block cache invalidation for switch hwpart. This causes a problem that data of current hw partition is cached before switching to another hw partition. And the following read operation of the latter hw partition will get wrong data when reading from the addresses that have been cached previously. To solve this problem, invalidate block cache after a successful mmc_switch_part() operation. Signed-off-by: Weijie Gao Tested-by: Felix Brack --- diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c index 5510079..2b146ea 100644 --- a/drivers/mmc/mmc-uclass.c +++ b/drivers/mmc/mmc-uclass.c @@ -360,6 +360,7 @@ static int mmc_select_hwpart(struct udevice *bdev, int hwpart) struct udevice *mmc_dev = dev_get_parent(bdev); struct mmc *mmc = mmc_get_mmc_dev(mmc_dev); struct blk_desc *desc = dev_get_uclass_platdata(bdev); + int ret; if (desc->hwpart == hwpart) return 0; @@ -367,7 +368,11 @@ static int mmc_select_hwpart(struct udevice *bdev, int hwpart) if (mmc->part_config == MMCPART_NOAVAILABLE) return -EMEDIUMTYPE; - return mmc_switch_part(mmc, hwpart); + ret = mmc_switch_part(mmc, hwpart); + if (!ret) + blkcache_invalidate(desc->if_type, desc->devnum); + + return ret; } static int mmc_blk_probe(struct udevice *dev)