From: Wolfgang Denk Date: Tue, 24 Oct 2006 13:32:57 +0000 (+0200) Subject: Code cleanup X-Git-Tag: U-Boot-1_1_6~20^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=47a6989c10685d2ab3efcf95228ce50d2a496d3e;p=kernel%2Fu-boot.git Code cleanup --- diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c index 7507801..6da5367 100644 --- a/cpu/mpc85xx/spd_sdram.c +++ b/cpu/mpc85xx/spd_sdram.c @@ -770,7 +770,7 @@ spd_sdram(void) * Determine Refresh Rate. */ refresh_clk = determine_refresh_rate(spd.refresh & 0x7); - + /* * Set BSTOPRE to 0x100 for page mode * If auto-charge is used, set BSTOPRE = 0 diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S index 1761963..7406fe2 100644 --- a/cpu/mpc86xx/start.S +++ b/cpu/mpc86xx/start.S @@ -40,8 +40,8 @@ #include #include -#ifndef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING "" +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" #endif /* We don't want the MMU yet. @@ -188,11 +188,11 @@ boot_warm: #if (CONFIG_NUM_CPUS > 1) mfspr r0, MSSCR0 andi. r0, r0, 0x0020 - rlwinm r0,r0,27,31,31 - mtspr PIR, r0 + rlwinm r0,r0,27,31,31 + mtspr PIR, r0 beq 1f - bl secondary_cpu_setup + bl secondary_cpu_setup #endif /* disable everything */ @@ -249,7 +249,7 @@ in_flash: stw r4, 0(r3) /* setup the law entries */ - bl law_entry + bl law_entry sync /* Don't use this feature due to bug in 8641D PD4 */ @@ -303,7 +303,7 @@ in_flash: /* enable and invalidate the data cache */ /* bl l1dcache_enable */ - bl dcache_enable + bl dcache_enable sync #if 1 @@ -320,56 +320,56 @@ in_flash: lis r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h ori r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l - li r0, 0 /* Make room for stack frame header and */ + li r0, 0 /* Make room for stack frame header and */ stwu r0, -4(r1) /* clear final stack frame so that */ stwu r0, -4(r1) /* stack backtraces terminate cleanly */ GET_GOT /* initialize GOT access */ - /* run low-level CPU init code (from Flash) */ + /* run low-level CPU init code (from Flash) */ bl cpu_init_f sync -#ifdef RUN_DIAG +#ifdef RUN_DIAG - /* Sri: Code to run the diagnostic automatically */ + /* Sri: Code to run the diagnostic automatically */ - /* Load PX_AUX register address in r4 */ - lis r4, 0xf810 - ori r4, r4, 0x6 - /* Load contents of PX_AUX in r3 bits 24 to 31*/ - lbz r3, 0(r4) + /* Load PX_AUX register address in r4 */ + lis r4, 0xf810 + ori r4, r4, 0x6 + /* Load contents of PX_AUX in r3 bits 24 to 31*/ + lbz r3, 0(r4) - /* Mask and obtain the bit in r3 */ - rlwinm. r3, r3, 0, 24, 24 - /* If not zero, jump and continue with u-boot */ - bne diag_done + /* Mask and obtain the bit in r3 */ + rlwinm. r3, r3, 0, 24, 24 + /* If not zero, jump and continue with u-boot */ + bne diag_done - /* Load back contents of PX_AUX in r3 bits 24 to 31 */ - lbz r3, 0(r4) - /* Set the MSB of the register value */ - ori r3, r3, 0x80 - /* Write value in r3 back to PX_AUX */ - stb r3, 0(r4) + /* Load back contents of PX_AUX in r3 bits 24 to 31 */ + lbz r3, 0(r4) + /* Set the MSB of the register value */ + ori r3, r3, 0x80 + /* Write value in r3 back to PX_AUX */ + stb r3, 0(r4) - /* Get the address to jump to in r3*/ - lis r3, CFG_DIAG_ADDR@h - ori r3, r3, CFG_DIAG_ADDR@l + /* Get the address to jump to in r3*/ + lis r3, CFG_DIAG_ADDR@h + ori r3, r3, CFG_DIAG_ADDR@l - /* Load the LR with the branch address */ - mtlr r3 + /* Load the LR with the branch address */ + mtlr r3 - /* Branch to diagnostic */ - blr + /* Branch to diagnostic */ + blr diag_done: #endif - /* bl l2cache_enable*/ - mr r3, r21 +/* bl l2cache_enable */ + mr r3, r21 /* r3: BOOTFLAG */ - /* run 1st part of board init code (from Flash) */ + /* run 1st part of board init code (from Flash) */ bl board_init_f sync @@ -383,20 +383,20 @@ invalidate_bats: mtspr IBAT1U, r0 mtspr IBAT2U, r0 mtspr IBAT3U, r0 - mtspr IBAT4U, r0 - mtspr IBAT5U, r0 - mtspr IBAT6U, r0 - mtspr IBAT7U, r0 + mtspr IBAT4U, r0 + mtspr IBAT5U, r0 + mtspr IBAT6U, r0 + mtspr IBAT7U, r0 isync mtspr DBAT0U, r0 mtspr DBAT1U, r0 mtspr DBAT2U, r0 mtspr DBAT3U, r0 - mtspr DBAT4U, r0 - mtspr DBAT5U, r0 - mtspr DBAT6U, r0 - mtspr DBAT7U, r0 + mtspr DBAT4U, r0 + mtspr DBAT5U, r0 + mtspr DBAT6U, r0 + mtspr DBAT7U, r0 isync sync @@ -482,80 +482,80 @@ setup_bats: isync /* IBAT 4 */ - addis r4, r0, CFG_IBAT4L@h - ori r4, r4, CFG_IBAT4L@l - addis r3, r0, CFG_IBAT4U@h - ori r3, r3, CFG_IBAT4U@l - mtspr IBAT4L, r4 - mtspr IBAT4U, r3 + addis r4, r0, CFG_IBAT4L@h + ori r4, r4, CFG_IBAT4L@l + addis r3, r0, CFG_IBAT4U@h + ori r3, r3, CFG_IBAT4U@l + mtspr IBAT4L, r4 + mtspr IBAT4U, r3 isync /* DBAT 4 */ - addis r4, r0, CFG_DBAT4L@h - ori r4, r4, CFG_DBAT4L@l - addis r3, r0, CFG_DBAT4U@h - ori r3, r3, CFG_DBAT4U@l - mtspr DBAT4L, r4 - mtspr DBAT4U, r3 + addis r4, r0, CFG_DBAT4L@h + ori r4, r4, CFG_DBAT4L@l + addis r3, r0, CFG_DBAT4U@h + ori r3, r3, CFG_DBAT4U@l + mtspr DBAT4L, r4 + mtspr DBAT4U, r3 isync /* IBAT 5 */ - addis r4, r0, CFG_IBAT5L@h - ori r4, r4, CFG_IBAT5L@l - addis r3, r0, CFG_IBAT5U@h - ori r3, r3, CFG_IBAT5U@l - mtspr IBAT5L, r4 - mtspr IBAT5U, r3 + addis r4, r0, CFG_IBAT5L@h + ori r4, r4, CFG_IBAT5L@l + addis r3, r0, CFG_IBAT5U@h + ori r3, r3, CFG_IBAT5U@l + mtspr IBAT5L, r4 + mtspr IBAT5U, r3 isync /* DBAT 5 */ - addis r4, r0, CFG_DBAT5L@h - ori r4, r4, CFG_DBAT5L@l - addis r3, r0, CFG_DBAT5U@h - ori r3, r3, CFG_DBAT5U@l - mtspr DBAT5L, r4 - mtspr DBAT5U, r3 + addis r4, r0, CFG_DBAT5L@h + ori r4, r4, CFG_DBAT5L@l + addis r3, r0, CFG_DBAT5U@h + ori r3, r3, CFG_DBAT5U@l + mtspr DBAT5L, r4 + mtspr DBAT5U, r3 isync /* IBAT 6 */ - addis r4, r0, CFG_IBAT6L@h - ori r4, r4, CFG_IBAT6L@l - addis r3, r0, CFG_IBAT6U@h - ori r3, r3, CFG_IBAT6U@l - mtspr IBAT6L, r4 - mtspr IBAT6U, r3 + addis r4, r0, CFG_IBAT6L@h + ori r4, r4, CFG_IBAT6L@l + addis r3, r0, CFG_IBAT6U@h + ori r3, r3, CFG_IBAT6U@l + mtspr IBAT6L, r4 + mtspr IBAT6U, r3 isync /* DBAT 6 */ - addis r4, r0, CFG_DBAT6L@h - ori r4, r4, CFG_DBAT6L@l - addis r3, r0, CFG_DBAT6U@h - ori r3, r3, CFG_DBAT6U@l - mtspr DBAT6L, r4 - mtspr DBAT6U, r3 + addis r4, r0, CFG_DBAT6L@h + ori r4, r4, CFG_DBAT6L@l + addis r3, r0, CFG_DBAT6U@h + ori r3, r3, CFG_DBAT6U@l + mtspr DBAT6L, r4 + mtspr DBAT6U, r3 isync /* IBAT 7 */ - addis r4, r0, CFG_IBAT7L@h - ori r4, r4, CFG_IBAT7L@l - addis r3, r0, CFG_IBAT7U@h - ori r3, r3, CFG_IBAT7U@l - mtspr IBAT7L, r4 - mtspr IBAT7U, r3 + addis r4, r0, CFG_IBAT7L@h + ori r4, r4, CFG_IBAT7L@l + addis r3, r0, CFG_IBAT7U@h + ori r3, r3, CFG_IBAT7U@l + mtspr IBAT7L, r4 + mtspr IBAT7U, r3 isync /* DBAT 7 */ - addis r4, r0, CFG_DBAT7L@h - ori r4, r4, CFG_DBAT7L@l - addis r3, r0, CFG_DBAT7U@h - ori r3, r3, CFG_DBAT7U@l - mtspr DBAT7L, r4 - mtspr DBAT7U, r3 + addis r4, r0, CFG_DBAT7L@h + ori r4, r4, CFG_DBAT7L@l + addis r3, r0, CFG_DBAT7U@h + ori r3, r3, CFG_DBAT7U@l + mtspr DBAT7L, r4 + mtspr DBAT7U, r3 isync 1: addis r3, 0, 0x0000 - addis r5, 0, 0x4 /* upper bound of 0x00040000 for 7400/750 */ + addis r5, 0, 0x4 /* upper bound of 0x00040000 for 7400/750 */ isync tlblp: @@ -663,8 +663,8 @@ get_svr: /* - * Function: in8 - * Description: Input 8 bits + * Function: in8 + * Description: Input 8 bits */ .globl in8 in8: @@ -672,8 +672,8 @@ in8: blr /* - * Function: out8 - * Description: Output 8 bits + * Function: out8 + * Description: Output 8 bits */ .globl out8 out8: @@ -681,8 +681,8 @@ out8: blr /* - * Function: out16 - * Description: Output 16 bits + * Function: out16 + * Description: Output 16 bits */ .globl out16 out16: @@ -690,8 +690,8 @@ out16: blr /* - * Function: out16r - * Description: Byte reverse and output 16 bits + * Function: out16r + * Description: Byte reverse and output 16 bits */ .globl out16r out16r: @@ -699,8 +699,8 @@ out16r: blr /* - * Function: out32 - * Description: Output 32 bits + * Function: out32 + * Description: Output 32 bits */ .globl out32 out32: @@ -708,8 +708,8 @@ out32: blr /* - * Function: out32r - * Description: Byte reverse and output 32 bits + * Function: out32r + * Description: Byte reverse and output 32 bits */ .globl out32r out32r: @@ -717,8 +717,8 @@ out32r: blr /* - * Function: in16 - * Description: Input 16 bits + * Function: in16 + * Description: Input 16 bits */ .globl in16 in16: @@ -726,8 +726,8 @@ in16: blr /* - * Function: in16r - * Description: Input 16 bits and byte reverse + * Function: in16r + * Description: Input 16 bits and byte reverse */ .globl in16r in16r: @@ -735,8 +735,8 @@ in16r: blr /* - * Function: in32 - * Description: Input 32 bits + * Function: in32 + * Description: Input 32 bits */ .globl in32 in32: @@ -744,8 +744,8 @@ in32: blr /* - * Function: in32r - * Description: Input 32 bits and byte reverse + * Function: in32r + * Description: Input 32 bits and byte reverse */ .globl in32r in32r: @@ -753,10 +753,10 @@ in32r: blr /* - * Function: ppcDcbf - * Description: Data Cache block flush - * Input: r3 = effective address - * Output: none. + * Function: ppcDcbf + * Description: Data Cache block flush + * Input: r3 = effective address + * Output: none. */ .globl ppcDcbf ppcDcbf: @@ -764,10 +764,10 @@ ppcDcbf: blr /* - * Function: ppcDcbi - * Description: Data Cache block Invalidate - * Input: r3 = effective address - * Output: none. + * Function: ppcDcbi + * Description: Data Cache block Invalidate + * Input: r3 = effective address + * Output: none. */ .globl ppcDcbi ppcDcbi: @@ -775,10 +775,10 @@ ppcDcbi: blr /* - * Function: ppcDcbz - * Description: Data Cache block zero. - * Input: r3 = effective address - * Output: none. + * Function: ppcDcbz + * Description: Data Cache block zero. + * Input: r3 = effective address + * Output: none. */ .globl ppcDcbz ppcDcbz: @@ -786,10 +786,10 @@ ppcDcbz: blr /* - * Function: ppcSync - * Description: Processor Synchronize - * Input: none. - * Output: none. + * Function: ppcSync + * Description: Processor Synchronize + * Input: none. + * Output: none. */ .globl ppcSync ppcSync: @@ -810,7 +810,7 @@ ppcSync: .globl relocate_code relocate_code: - mr r1, r3 /* Set new stack pointer */ + mr r1, r3 /* Set new stack pointer */ mr r9, r4 /* Save copy of Global Data pointer */ mr r29, r9 /* Save for DECLARE_GLOBAL_DATA_PTR */ mr r10, r5 /* Save copy of Destination Address */ @@ -891,7 +891,7 @@ relocate_code: add r4,r4,r6 cmplw r4,r5 blt 6b -7: sync /* Wait for all icbi to complete on bus */ +7: sync /* Wait for all icbi to complete on bus */ isync /* @@ -1051,9 +1051,9 @@ trap_reloc: .globl enable_ext_addr enable_ext_addr: mfspr r0, HID0 - lis r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@h + lis r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@h ori r0, r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@l - mtspr HID0, r0 + mtspr HID0, r0 sync isync blr @@ -1065,8 +1065,8 @@ setup_ccsrbar: lis r4, CFG_CCSRBAR_DEFAULT@h ori r4, r4, CFG_CCSRBAR_DEFAULT@l - lis r5, CFG_CCSRBAR@h - ori r5, r5, CFG_CCSRBAR@l + lis r5, CFG_CCSRBAR@h + ori r5, r5, CFG_CCSRBAR@l srwi r6,r5,12 stw r6, 0(r4) isync @@ -1130,36 +1130,36 @@ unlock_ram_in_cache: 1: icbi r0, r3 addi r3, r3, 32 bdnz 1b - sync /* Wait for all icbi to complete on bus */ + sync /* Wait for all icbi to complete on bus */ isync #if 1 /* Unlock the data cache and invalidate it */ - mfspr r0, HID0 - li r3,0x1000 - andc r0,r0,r3 + mfspr r0, HID0 + li r3,0x1000 + andc r0,r0,r3 li r3,0x0400 or r0,r0,r3 sync - mtspr HID0, r0 + mtspr HID0, r0 sync blr #endif #if 0 /* Unlock the first way of the data cache */ - mfspr r0, LDSTCR - li r3,0x0080 - andc r0,r0,r3 + mfspr r0, LDSTCR + li r3,0x0080 + andc r0,r0,r3 #ifdef CONFIG_ALTIVEC dssall #endif sync - mtspr LDSTCR, r0 + mtspr LDSTCR, r0 sync isync li r3,0x0400 or r0,r0,r3 sync - mtspr HID0, r0 + mtspr HID0, r0 sync blr #endif @@ -1168,9 +1168,9 @@ unlock_ram_in_cache: /* If this is a multi-cpu system then we need to handle the * 2nd cpu. The assumption is that the 2nd cpu is being * held in boot holdoff mode until the 1st cpu unlocks it - * from Linux. We'll do some basic cpu init and then pass + * from Linux. We'll do some basic cpu init and then pass * it to the Linux Reset Vector. - * Sri: Much of this initialization is not required. Linux + * Sri: Much of this initialization is not required. Linux * rewrites the bats, and the sprs and also enables the L1 cache. */ #if (CONFIG_NUM_CPUS > 1) @@ -1199,27 +1199,27 @@ secondary_cpu_setup: bl dcache_enable sync - /* enable and invalidate the instruction cache*/ - bl icache_enable - sync + /* enable and invalidate the instruction cache*/ + bl icache_enable + sync - /* TBEN in HID0 */ + /* TBEN in HID0 */ mfspr r4, HID0 - oris r4, r4, 0x0400 - mtspr HID0, r4 - sync - isync - - /*SYNCBE|ABE in HID1*/ - mfspr r4, HID1 - ori r4, r4, 0x0C00 - mtspr HID1, r4 - sync - isync - - lis r3, CONFIG_LINUX_RESET_VEC@h + oris r4, r4, 0x0400 + mtspr HID0, r4 + sync + isync + + /*SYNCBE|ABE in HID1*/ + mfspr r4, HID1 + ori r4, r4, 0x0C00 + mtspr HID1, r4 + sync + isync + + lis r3, CONFIG_LINUX_RESET_VEC@h ori r3, r3, CONFIG_LINUX_RESET_VEC@l - mtlr r3 + mtlr r3 blr /* Never Returns, Running in Linux Now */