From: Dmitry Lifshitz Date: Wed, 28 Dec 2016 16:28:33 +0000 (+0200) Subject: arm: am57xx: cl-som-am57x: add initial board support X-Git-Tag: v2017.01-rc3~5 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=46650d583b8067c8aecf2ddea585e8a97f937d0c;p=platform%2Fkernel%2Fu-boot.git arm: am57xx: cl-som-am57x: add initial board support Features supported : * Serial console * SPI Flash * MMC/SD Card * eMMC storage * SATA * PCA9555 - GPIO expander over I2C5 bus * USB Use spl alternate boot device feature to define fallback to the main boot device as it is defined by hardware. Signed-off-by: Dmitry Lifshitz [uri.mashiach@compulab.co.il: Adjust to v2016.11] Signed-off-by: Uri Mashiach Acked-by: Igor Grinberg --- diff --git a/arch/arm/mach-omap2/omap5/Kconfig b/arch/arm/mach-omap2/omap5/Kconfig index 018e584..242d1ee 100644 --- a/arch/arm/mach-omap2/omap5/Kconfig +++ b/arch/arm/mach-omap2/omap5/Kconfig @@ -40,6 +40,9 @@ choice prompt "OMAP5 board select" optional +config TARGET_CL_SOM_AM57X + bool "CompuLab CL-SOM-AM57x" + config TARGET_CM_T54 bool "CompuLab CM-T54" @@ -179,6 +182,7 @@ endchoice endmenu endif +source "board/compulab/cl-som-am57x/Kconfig" source "board/compulab/cm_t54/Kconfig" source "board/ti/omap5_uevm/Kconfig" source "board/ti/dra7xx/Kconfig" diff --git a/board/compulab/cl-som-am57x/Kconfig b/board/compulab/cl-som-am57x/Kconfig new file mode 100644 index 0000000..85fc9a1 --- /dev/null +++ b/board/compulab/cl-som-am57x/Kconfig @@ -0,0 +1,12 @@ +if TARGET_CL_SOM_AM57X + +config SYS_BOARD + default "cl-som-am57x" + +config SYS_VENDOR + default "compulab" + +config SYS_CONFIG_NAME + default "cl-som-am57x" + +endif diff --git a/board/compulab/cl-som-am57x/MAINTAINERS b/board/compulab/cl-som-am57x/MAINTAINERS new file mode 100644 index 0000000..e0195f4 --- /dev/null +++ b/board/compulab/cl-som-am57x/MAINTAINERS @@ -0,0 +1,6 @@ +CL-SOM-AM57x BOARD +M: Uri Mashiach +S: Maintained +F: board/compulab/cl-som-am57x/ +F: include/configs/cl-som-am57x.h +F: configs/cl-som-am57x_defconfig diff --git a/board/compulab/cl-som-am57x/Makefile b/board/compulab/cl-som-am57x/Makefile new file mode 100644 index 0000000..0c59781 --- /dev/null +++ b/board/compulab/cl-som-am57x/Makefile @@ -0,0 +1,15 @@ +# +# Makefile +# +# (C) Copyright 2016 CompuLab, Ltd. +# +# Author: Dmitry Lifshitz +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o mux.o +else +obj-y += cl-som-am57x.o mux.o +endif diff --git a/board/compulab/cl-som-am57x/cl-som-am57x.c b/board/compulab/cl-som-am57x/cl-som-am57x.c new file mode 100644 index 0000000..4bad644 --- /dev/null +++ b/board/compulab/cl-som-am57x/cl-som-am57x.c @@ -0,0 +1,62 @@ +/* + * Board functions for CompuLab cl_som_am57x board + * + * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ + * + * Author: Dmitry Lifshitz + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +const struct omap_sysinfo sysinfo = { + "Board: CL-SOM-AM57x\n" +}; + +int board_init(void) +{ + /* Disable PMIC Powerhold feature, DEV_CTRL.DEV_ON = 1 */ + palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1); + + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + return 0; +} + +#ifdef CONFIG_GENERIC_MMC +#define SB_SOM_CD_GPIO 187 +#define SB_SOM_WP_GPIO 188 + +int board_mmc_init(bd_t *bis) +{ + int ret0, ret1; + + ret0 = omap_mmc_init(0, 0, 0, SB_SOM_CD_GPIO, SB_SOM_WP_GPIO); + if (ret0) + printf("cl-som-am57x: failed to initialize mmc0\n"); + + ret1 = omap_mmc_init(1, 0, 0, -1, -1); + if (ret1) + printf("cl-som-am57x: failed to initialize mmc1\n"); + + return ret0 && ret1; +} +#endif /* CONFIG_GENERIC_MMC */ + +#ifdef CONFIG_USB_XHCI_OMAP +int board_usb_init(int index, enum usb_init_type init) +{ + setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl, + OTG_SS_CLKCTRL_MODULEMODE_HW | OPTFCLKEN_REFCLK960M); + + return 0; +} +#endif /* CONFIG_USB_XHCI_OMAP */ diff --git a/board/compulab/cl-som-am57x/mux.c b/board/compulab/cl-som-am57x/mux.c new file mode 100644 index 0000000..625cbc1 --- /dev/null +++ b/board/compulab/cl-som-am57x/mux.c @@ -0,0 +1,100 @@ +/* + * Pinmux configuration for CompuLab CL-SOM-AM57x board + * + * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ + * + * Author: Dmitry Lifshitz + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include + +/* Serial console */ +static const struct pad_conf_entry cl_som_am57x_padconf_console[] = { + {UART3_RXD, (FSC | IEN | PDIS | PTU | M0)}, /* UART3_RXD */ + {UART3_TXD, (FSC | IEN | PDIS | PTU | M0)}, /* UART3_TXD */ +}; + +/* PMIC I2C */ +static const struct pad_conf_entry cl_som_am57x_padconf_pmic[] = { + {MCASP1_ACLKR, (IEN | PEN | M10)}, /* MCASP1_ACLKR.I2C4_SDA */ + {MCASP1_FSR, (IEN | PEN | M10)}, /* MCASP1_FSR.I2C4_SCL */ +}; + +/* Green GPIO led */ +static const struct pad_conf_entry cl_som_am57x_padconf_green_led[] = { + {GPMC_A15, (IDIS | PDIS | PTD | M14)}, /* GPMC_A15.GPIO2_5 */ +}; + +/* MMC/SD Card */ +static const struct pad_conf_entry cl_som_am57x_padconf_sd_card[] = { + {MMC1_CLK, (IEN | PDIS | PTU | M0) }, /* MMC1_CLK */ + {MMC1_CMD, (IEN | PDIS | PTU | M0) }, /* MMC1_CMD */ + {MMC1_DAT0, (IEN | PDIS | PTU | M0) }, /* MMC1_DAT0 */ + {MMC1_DAT1, (IEN | PDIS | PTU | M0) }, /* MMC1_DAT1 */ + {MMC1_DAT2, (IEN | PDIS | PTU | M0) }, /* MMC1_DAT2 */ + {MMC1_DAT3, (IEN | PDIS | PTU | M0) }, /* MMC1_DAT3 */ + {MMC1_SDCD, (IEN | PEN | M14)}, /* MMC1_SDCD */ + {MMC1_SDWP, (IEN | PEN | M14)}, /* MMC1_SDWP */ +}; + +/* WiFi - must be in the safe mode on boot */ +static const struct pad_conf_entry cl_som_am57x_padconf_wifi[] = { + {UART1_CTSN, (IEN | M15)}, /* UART1_CTSN */ + {UART1_RTSN, (IEN | M15)}, /* UART1_RTSN */ + {UART2_RXD, (IEN | M15)}, /* UART2_RXD */ + {UART2_TXD, (IEN | M15)}, /* UART2_TXD */ + {UART2_CTSN, (IEN | M15)}, /* UART2_CTSN */ + {UART2_RTSN, (IEN | M15)}, /* UART2_RTSN */ +}; + +/* QSPI */ +static const struct pad_conf_entry cl_som_am57x_padconf_qspi[] = { + {GPMC_A13, (IEN | PEN | M1)}, /* GPMC_A13.QSPI1_RTCLK */ + {GPMC_A18, (IEN | PEN | M1)}, /* GPMC_A18.QSPI1_SCLK */ + {GPMC_A16, (IEN | PEN | M1)}, /* GPMC_A16.QSPI1_D0 */ + {GPMC_A17, (IEN | PEN | M1)}, /* GPMC_A17.QSPI1_D1 */ + {GPMC_CS2, (IEN | PDIS | PTU | M1)}, /* GPMC_CS2.QSPI1_CS0 */ +}; + +/* GPIO Expander I2C */ +static const struct pad_conf_entry cl_som_am57x_padconf_i2c_gpio[] = { + {MCASP1_AXR0, (IEN | PEN | M10)}, /* MCASP1_AXR0.I2C5_SDA */ + {MCASP1_AXR1, (IEN | PEN | M10)}, /* MCASP1_AXR1.I2C5_SCL */ +}; + +/* eMMC internal storage */ +static const struct pad_conf_entry cl_som_am57x_padconf_emmc[] = { + {GPMC_A19, (IEN | PDIS | PTU | M1)}, /* GPMC_A19.MMC2_DAT4 */ + {GPMC_A20, (IEN | PDIS | PTU | M1)}, /* GPMC_A20.MMC2_DAT5 */ + {GPMC_A21, (IEN | PDIS | PTU | M1)}, /* GPMC_A21.MMC2_DAT6 */ + {GPMC_A22, (IEN | PDIS | PTU | M1)}, /* GPMC_A22.MMC2_DAT7 */ + {GPMC_A23, (IEN | PDIS | PTU | M1)}, /* GPMC_A23.MMC2_CLK */ + {GPMC_A24, (IEN | PDIS | PTU | M1)}, /* GPMC_A24.MMC2_DAT0 */ + {GPMC_A25, (IEN | PDIS | PTU | M1)}, /* GPMC_A25.MMC2_DAT1 */ + {GPMC_A26, (IEN | PDIS | PTU | M1)}, /* GPMC_A26.MMC2_DAT2 */ + {GPMC_A27, (IEN | PDIS | PTU | M1)}, /* GPMC_A27.MMC2_DAT3 */ + {GPMC_CS1, (IEN | PDIS | PTU | M1)}, /* GPMC_CS1.MMC2_CMD */ +}; + +/* usb1_drvvbus */ +static const struct pad_conf_entry cl_som_am57x_padconf_usb[] = { + {USB1_DRVVBUS, (M0 | FSC) }, /* USB1_DRVVBUS.USB1_DRVVBUS */ +}; + +#define SET_MUX(mux_array) do_set_mux32((*ctrl)->control_padconf_core_base, \ + mux_array, ARRAY_SIZE(mux_array)) + +void set_muxconf_regs(void) +{ + SET_MUX(cl_som_am57x_padconf_console); + SET_MUX(cl_som_am57x_padconf_pmic); + SET_MUX(cl_som_am57x_padconf_green_led); + SET_MUX(cl_som_am57x_padconf_sd_card); + SET_MUX(cl_som_am57x_padconf_wifi); + SET_MUX(cl_som_am57x_padconf_qspi); + SET_MUX(cl_som_am57x_padconf_i2c_gpio); + SET_MUX(cl_som_am57x_padconf_emmc); + SET_MUX(cl_som_am57x_padconf_usb); +} diff --git a/board/compulab/cl-som-am57x/spl.c b/board/compulab/cl-som-am57x/spl.c new file mode 100644 index 0000000..855678f --- /dev/null +++ b/board/compulab/cl-som-am57x/spl.c @@ -0,0 +1,234 @@ +/* + * SPL data and initialization for CompuLab CL-SOM-AM57x board + * + * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ + * + * Author: Uri Mashiach + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +static const struct dmm_lisa_map_regs cl_som_am57x_lisa_regs = { + .dmm_lisa_map_3 = 0x80740300, + .is_ma_present = 0x1 +}; + +void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) +{ + *dmm_lisa_regs = &cl_som_am57x_lisa_regs; +} + +static const struct emif_regs cl_som_am57x_emif1_ddr3_532mhz_emif_regs = { + .sdram_config_init = 0x61852332, + .sdram_config = 0x61852332, + .sdram_config2 = 0x00000000, + .ref_ctrl = 0x000040f1, + .ref_ctrl_final = 0x00001040, + .sdram_tim1 = 0xeeef36f3, + .sdram_tim2 = 0x348f7fda, + .sdram_tim3 = 0x027f88a8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x1007190b, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0034400b, + .emif_ddr_phy_ctlr_1 = 0x0e34400b, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x00740074, + .emif_ddr_ext_phy_ctrl_3 = 0x00780078, + .emif_ddr_ext_phy_ctrl_4 = 0x007c007c, + .emif_ddr_ext_phy_ctrl_5 = 0x007b007b, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x00000305 +}; + +/* Ext phy ctrl regs 1-35 */ +static const u32 cl_som_am57x_emif1_ddr3_ext_phy_ctrl_regs[] = { + 0x10040100, + 0x00740074, + 0x00780078, + 0x007c007c, + 0x007b007b, + 0x00800080, + 0x00360036, + 0x00340034, + 0x00360036, + 0x00350035, + 0x00350035, + + 0x01ff01ff, + 0x01ff01ff, + 0x01ff01ff, + 0x01ff01ff, + 0x01ff01ff, + + 0x00430043, + 0x003e003e, + 0x004a004a, + 0x00470047, + 0x00400040, + + 0x00000000, + 0x00600020, + 0x40011080, + 0x08102040, + + 0x00400040, + 0x00400040, + 0x00400040, + 0x00400040, + 0x00400040, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0 +}; + +static const struct emif_regs cl_som_am57x_emif2_ddr3_532mhz_emif_regs = { + .sdram_config_init = 0x61852332, + .sdram_config = 0x61852332, + .sdram_config2 = 0x00000000, + .ref_ctrl = 0x000040f1, + .ref_ctrl_final = 0x00001040, + .sdram_tim1 = 0xeeef36f3, + .sdram_tim2 = 0x348f7fda, + .sdram_tim3 = 0x027f88a8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x1007190b, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0034400b, + .emif_ddr_phy_ctlr_1 = 0x0e34400b, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x00740074, + .emif_ddr_ext_phy_ctrl_3 = 0x00780078, + .emif_ddr_ext_phy_ctrl_4 = 0x007c007c, + .emif_ddr_ext_phy_ctrl_5 = 0x007b007b, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x00000305 +}; + +static const u32 cl_som_am57x_emif2_ddr3_ext_phy_ctrl_regs[] = { + 0x10040100, + 0x00820082, + 0x008b008b, + 0x00800080, + 0x007e007e, + 0x00800080, + 0x00370037, + 0x00390039, + 0x00360036, + 0x00370037, + 0x00350035, + 0x01ff01ff, + 0x01ff01ff, + 0x01ff01ff, + 0x01ff01ff, + 0x01ff01ff, + 0x00540054, + 0x00540054, + 0x004e004e, + 0x004c004c, + 0x00400040, + + 0x00000000, + 0x00600020, + 0x40011080, + 0x08102040, + + 0x00400040, + 0x00400040, + 0x00400040, + 0x00400040, + 0x00400040, + 0x0, + 0x0, + 0x0, + 0x0, + 0x0 +}; + +static struct vcores_data cl_som_am57x_volts = { + .mpu.value[OPP_NOM] = VDD_MPU_DRA7_NOM, + .mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM, + .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .mpu.addr = TPS659038_REG_ADDR_SMPS12, + .mpu.pmic = &tps659038, + + .eve.value[OPP_NOM] = VDD_EVE_DRA7_NOM, + .eve.value[OPP_OD] = VDD_EVE_DRA7_OD, + .eve.value[OPP_HIGH] = VDD_EVE_DRA7_HIGH, + .eve.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_DSPEVE_NOM, + .eve.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_DSPEVE_OD, + .eve.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_DSPEVE_HIGH, + .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .eve.addr = TPS659038_REG_ADDR_SMPS45, + .eve.pmic = &tps659038, + + .gpu.value[OPP_NOM] = VDD_GPU_DRA7_NOM, + .gpu.value[OPP_OD] = VDD_GPU_DRA7_OD, + .gpu.value[OPP_HIGH] = VDD_GPU_DRA7_HIGH, + .gpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_GPU_NOM, + .gpu.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_GPU_OD, + .gpu.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_GPU_HIGH, + .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .gpu.addr = TPS659038_REG_ADDR_SMPS6, + .gpu.pmic = &tps659038, + + .core.value[OPP_NOM] = VDD_CORE_DRA7_NOM, + .core.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_CORE_NOM, + .core.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .core.addr = TPS659038_REG_ADDR_SMPS7, + .core.pmic = &tps659038, + + .iva.value[OPP_NOM] = VDD_IVA_DRA7_NOM, + .iva.value[OPP_OD] = VDD_IVA_DRA7_OD, + .iva.value[OPP_HIGH] = VDD_IVA_DRA7_HIGH, + .iva.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_IVA_NOM, + .iva.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_IVA_OD, + .iva.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_IVA_HIGH, + .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, + .iva.addr = TPS659038_REG_ADDR_SMPS8, + .iva.pmic = &tps659038, +}; + +void hw_data_init(void) +{ + *prcm = &dra7xx_prcm; + *dplls_data = &dra7xx_dplls; + *omap_vcores = &cl_som_am57x_volts; + *ctrl = &dra7xx_ctrl; +} + +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) +{ + switch (emif_nr) { + case 1: + *regs = &cl_som_am57x_emif1_ddr3_532mhz_emif_regs; + break; + case 2: + *regs = &cl_som_am57x_emif2_ddr3_532mhz_emif_regs; + break; + } +} + +void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size) +{ + switch (emif_nr) { + case 1: + *regs = cl_som_am57x_emif1_ddr3_ext_phy_ctrl_regs; + *size = ARRAY_SIZE(cl_som_am57x_emif1_ddr3_ext_phy_ctrl_regs); + break; + case 2: + *regs = cl_som_am57x_emif2_ddr3_ext_phy_ctrl_regs; + *size = ARRAY_SIZE(cl_som_am57x_emif2_ddr3_ext_phy_ctrl_regs); + break; + } +} diff --git a/configs/cl-som-am57x_defconfig b/configs/cl-som-am57x_defconfig new file mode 100644 index 0000000..9eadf42 --- /dev/null +++ b/configs/cl-som-am57x_defconfig @@ -0,0 +1,41 @@ +CONFIG_ARM=y +CONFIG_OMAP54XX=y +# CONFIG_SPL_NAND_SUPPORT is not set +CONFIG_TARGET_CL_SOM_AM57X=y +CONFIG_VERSION_VARIABLE=y +CONFIG_SPL=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_ASKENV=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_ATMEL=y +CONFIG_SPI_FLASH_EON=y +CONFIG_SPI_FLASH_GIGADEVICE=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SYS_NS16550=y +CONFIG_TI_QSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_OF_LIBFDT=y diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h new file mode 100644 index 0000000..c8d4a00 --- /dev/null +++ b/include/configs/cl-som-am57x.h @@ -0,0 +1,105 @@ +/* + * Configuration settings for CompuLab CL-SOM-AM57x board + * + * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ + * + * Author: Dmitry Lifshitz + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_CL_SOM_AM57X_H +#define __CONFIG_CL_SOM_AM57X_H + +#define CONFIG_DRA7XX + +#define CONFIG_NR_DRAM_BANKS 2 + +#define CONSOLEDEV "ttyO2" +#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_OMAP_ABE_SYSCK + +#include + +/* Status LED */ +#define CONFIG_STATUS_LED /* Status LED enabled */ +#define CONFIG_GPIO_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define GREEN_LED_DEV 0 + /* cl_som_am57x Green LED is GPIO2_5 */ +#define GREEN_LED_GPIO 37 +#define STATUS_LED_BIT GREEN_LED_GPIO +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) + +/* PMIC I2C bus number */ +#define CONFIG_SYS_SPD_BUS_NUM 3 + +/* SPI Flash support */ +#undef CONFIG_OMAP3_SPI + +#define CONFIG_TI_SPI_MMAP +#define CONFIG_SF_DEFAULT_SPEED 48000000 +#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 + +/* SPI SPL defines */ +/* Offsets: 0K - SPL1, 64K - SPL2, 128K - SPL3, 192K - SPL4, 256K - U-Boot */ +#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024) +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD + +/* SD/MMC RAW boot */ +#undef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME +#undef CONFIG_SYS_MMCSD_FS_BOOT_PARTITION + +/* Environment */ +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB env size */ +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_OFFSET (768 * 1024) +#define CONFIG_ENV_SPI_MAX_HZ 48000000 + +#ifndef CONFIG_SPL_BUILD +/* SATA */ +#define CONFIG_CMD_SCSI +#define CONFIG_LIBATA +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +/* PCA9555 GPIO expander support */ +#define CONFIG_PCA953X +#define CONFIG_CMD_PCA953X +#define CONFIG_CMD_PCA953X_INFO +#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 +#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } + +/* GPT */ +#define CONFIG_CMD_GPT +#define CONFIG_EFI_PARTITION + +/* USB xHCI HOST */ +#define CONFIG_USB_XHCI_OMAP +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 + +#define CONFIG_OMAP_USB_PHY +#define CONFIG_OMAP_USB3PHY1_HOST + +/* USB Networking options */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_USB_ETHER_RNDIS +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_MCS7830 + +#endif /* !CONFIG_SPL_BUILD */ + +#endif /* __CONFIG_CL_SOM_AM57X_H */