From: Maharaja Kennadyrajan Date: Tue, 18 Sep 2018 12:07:26 +0000 (+0530) Subject: ath10k: advertize beacon_int_min_gcd as 100 while bring up multi vaps X-Git-Tag: v5.4-rc1~2266^2~144^2~24^2~12 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4600563f9319006782bdacef0dfff2f493202eb0;p=platform%2Fkernel%2Flinux-rpi.git ath10k: advertize beacon_int_min_gcd as 100 while bring up multi vaps With the latest firmware design, the beacon interval should be greater than 100 to bring the multiple vaps. Set beacon_int_min_gcd to 100, when the wmi service WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT is enabled in the firmware. If not, beacon_int_min_gcd will be set to the default value 1. Tested in QCA4019 with firmware ver 10.4-3.2.1.1-00015 Tested in QCA9888 with firmware ver 10.4-3.5.1-0005 Signed-off-by: Maharaja Kennadyrajan Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index dc4e3cc..3933dd9 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -8204,6 +8204,24 @@ static const struct ieee80211_iface_combination ath10k_10_4_if_comb[] = { }, }; +static const struct +ieee80211_iface_combination ath10k_10_4_bcn_int_if_comb[] = { + { + .limits = ath10k_10_4_if_limits, + .n_limits = ARRAY_SIZE(ath10k_10_4_if_limits), + .max_interfaces = 16, + .num_different_channels = 1, + .beacon_int_infra_match = true, + .beacon_int_min_gcd = 100, +#ifdef CONFIG_ATH10K_DFS_CERTIFIED + .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | + BIT(NL80211_CHAN_WIDTH_20) | + BIT(NL80211_CHAN_WIDTH_40) | + BIT(NL80211_CHAN_WIDTH_80), +#endif + }, +}; + static void ath10k_get_arvif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) { @@ -8571,6 +8589,13 @@ int ath10k_mac_register(struct ath10k *ar) ar->hw->wiphy->iface_combinations = ath10k_10_4_if_comb; ar->hw->wiphy->n_iface_combinations = ARRAY_SIZE(ath10k_10_4_if_comb); + if (test_bit(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, + ar->wmi.svc_map)) { + ar->hw->wiphy->iface_combinations = + ath10k_10_4_bcn_int_if_comb; + ar->hw->wiphy->n_iface_combinations = + ARRAY_SIZE(ath10k_10_4_bcn_int_if_comb); + } break; case ATH10K_FW_WMI_OP_VERSION_UNSET: case ATH10K_FW_WMI_OP_VERSION_MAX: diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 21d1e93..f67c527 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -204,6 +204,7 @@ enum wmi_service { WMI_SERVICE_RESET_CHIP, WMI_SERVICE_SPOOF_MAC_SUPPORT, WMI_SERVICE_TX_DATA_ACK_RSSI, + WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, /* keep last */ WMI_SERVICE_MAX, @@ -353,6 +354,11 @@ enum wmi_10_4_service { WMI_10_4_SERVICE_TPC_STATS_FINAL, WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT, WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, + WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY, + WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT, + WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT, + WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL, + WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, }; static inline char *wmi_service_name(int service_id) @@ -467,6 +473,7 @@ static inline char *wmi_service_name(int service_id) SVCSTR(WMI_SERVICE_TPC_STATS_FINAL); SVCSTR(WMI_SERVICE_RESET_CHIP); SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI); + SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT); default: return NULL; } @@ -777,6 +784,8 @@ static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out, WMI_SERVICE_TPC_STATS_FINAL, len); SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI, WMI_SERVICE_TX_DATA_ACK_RSSI, len); + SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, + WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len); } #undef SVCMAP