From: Peng Fan Date: Wed, 10 Jul 2019 06:43:07 +0000 (+0800) Subject: mmc: support hs400 enhanced strobe mode X-Git-Tag: v2019.10-rc1~29^2~6 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=44acd492480f8c8047326f3cb02d3e4d3760ecd0;p=platform%2Fkernel%2Fu-boot.git mmc: support hs400 enhanced strobe mode eMMC 5.1+ supports HS400 Enhances Strobe mode without the need for tuning procedure. The flow is as following: - set HS_TIMIMG (Highspeed) - Host change freq to <= 52Mhz - set the bus width to Enhanced strobe and DDR8Bit(CMD6), EXT_CSD[183] = 0x86 instead of 0x80 - set HS_TIMING to 0x3 (HS400) - Host change freq to <= 200Mhz - Host select HS400 enhanced strobe complete Signed-off-by: Peng Fan --- diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index a4a6a6c..890ef35 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -135,6 +135,18 @@ config SPL_MMC_UHS_SUPPORT cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus frequency can go up to 208MHz (SDR104) +config MMC_HS400_ES_SUPPORT + bool "enable HS400 Enhanced Strobe support" + help + The HS400 Enhanced Strobe mode is support by some eMMC. The bus + frequency is up to 200MHz. This mode does not tune the IO. + +config SPL_MMC_HS400_ES_SUPPORT + bool "enable HS400 Enhanced Strobe support in SPL" + help + The HS400 Enhanced Strobe mode is support by some eMMC. The bus + frequency is up to 200MHz. This mode does not tune the IO. + config MMC_HS400_SUPPORT bool "enable HS400 support" select MMC_HS200_SUPPORT diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c index 9327c83..8bf63bb 100644 --- a/drivers/mmc/mmc-uclass.c +++ b/drivers/mmc/mmc-uclass.c @@ -105,6 +105,23 @@ int mmc_execute_tuning(struct mmc *mmc, uint opcode) } #endif +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) +int dm_mmc_set_enhanced_strobe(struct udevice *dev) +{ + struct dm_mmc_ops *ops = mmc_get_ops(dev); + + if (ops->set_enhanced_strobe) + return ops->set_enhanced_strobe(dev); + + return -ENOTSUPP; +} + +int mmc_set_enhanced_strobe(struct mmc *mmc) +{ + return dm_mmc_set_enhanced_strobe(mmc->dev); +} +#endif + int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg) { int val; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 2a1ba6e..c9aa13b 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -148,6 +148,7 @@ const char *mmc_mode_name(enum bus_mode mode) [MMC_DDR_52] = "MMC DDR52 (52MHz)", [MMC_HS_200] = "HS200 (200MHz)", [MMC_HS_400] = "HS400 (200MHz)", + [MMC_HS_400_ES] = "HS400ES (200MHz)", }; if (mode >= MMC_MODES_END) @@ -173,6 +174,7 @@ static uint mmc_mode2freq(struct mmc *mmc, enum bus_mode mode) [UHS_SDR104] = 208000000, [MMC_HS_200] = 200000000, [MMC_HS_400] = 200000000, + [MMC_HS_400_ES] = 200000000, }; if (mode == MMC_LEGACY) @@ -839,6 +841,11 @@ static int mmc_set_card_speed(struct mmc *mmc, enum bus_mode mode, speed_bits = EXT_CSD_TIMING_HS400; break; #endif +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) + case MMC_HS_400_ES: + speed_bits = EXT_CSD_TIMING_HS400; + break; +#endif case MMC_LEGACY: speed_bits = EXT_CSD_TIMING_LEGACY; break; @@ -909,7 +916,8 @@ static int mmc_get_capabilities(struct mmc *mmc) mmc->card_caps |= MMC_MODE_HS200; } #endif -#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) +#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) || \ + CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) if (cardtype & (EXT_CSD_CARD_TYPE_HS400_1_2V | EXT_CSD_CARD_TYPE_HS400_1_8V)) { mmc->card_caps |= MMC_MODE_HS400; @@ -923,6 +931,13 @@ static int mmc_get_capabilities(struct mmc *mmc) if (cardtype & EXT_CSD_CARD_TYPE_26) mmc->card_caps |= MMC_MODE_HS; +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) + if (ext_csd[EXT_CSD_STROBE_SUPPORT] && + (mmc->card_caps & MMC_MODE_HS400)) { + mmc->card_caps |= MMC_MODE_HS400_ES; + } +#endif + return 0; } #endif @@ -1799,6 +1814,7 @@ static int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode, u32 card_mask = 0; switch (mode) { + case MMC_HS_400_ES: case MMC_HS_400: case MMC_HS_200: if (mmc->cardtype & (EXT_CSD_CARD_TYPE_HS200_1_8V | @@ -1841,6 +1857,12 @@ static inline int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode, #endif static const struct mode_width_tuning mmc_modes_by_pref[] = { +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) + { + .mode = MMC_HS_400_ES, + .widths = MMC_MODE_8BIT, + }, +#endif #if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) { .mode = MMC_HS_400, @@ -1938,6 +1960,47 @@ static int mmc_select_hs400(struct mmc *mmc) } #endif +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) +#if !CONFIG_IS_ENABLED(DM_MMC) +static int mmc_set_enhanced_strobe(struct mmc *mmc) +{ + return -ENOTSUPP; +} +#endif +static int mmc_select_hs400es(struct mmc *mmc) +{ + int err; + + err = mmc_set_card_speed(mmc, MMC_HS, true); + if (err) + return err; + + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, + EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_FLAG | + EXT_CSD_BUS_WIDTH_STROBE); + if (err) { + printf("switch to bus width for hs400 failed\n"); + return err; + } + /* TODO: driver strength */ + err = mmc_set_card_speed(mmc, MMC_HS_400_ES, false); + if (err) + return err; + + mmc_select_mode(mmc, MMC_HS_400_ES); + err = mmc_set_clock(mmc, mmc->tran_speed, false); + if (err) + return err; + + return mmc_set_enhanced_strobe(mmc); +} +#else +static int mmc_select_hs400es(struct mmc *mmc) +{ + return -ENOTSUPP; +} +#endif + #define for_each_supported_width(caps, ddr, ecbv) \ for (ecbv = ext_csd_bus_width;\ ecbv < ext_csd_bus_width + ARRAY_SIZE(ext_csd_bus_width);\ @@ -2016,6 +2079,13 @@ static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps) printf("Select HS400 failed %d\n", err); goto error; } + } else if (mwt->mode == MMC_HS_400_ES) { + err = mmc_select_hs400es(mmc); + if (err) { + printf("Select HS400ES failed %d\n", + err); + goto error; + } } else { /* configure the bus speed (card) */ err = mmc_set_card_speed(mmc, mwt->mode, false); diff --git a/include/mmc.h b/include/mmc.h index 0ef891f..46422f4 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -65,6 +65,7 @@ #define MMC_MODE_DDR_52MHz MMC_CAP(MMC_DDR_52) #define MMC_MODE_HS200 MMC_CAP(MMC_HS_200) #define MMC_MODE_HS400 MMC_CAP(MMC_HS_400) +#define MMC_MODE_HS400_ES MMC_CAP(MMC_HS_400_ES) #define MMC_CAP_NONREMOVABLE BIT(14) #define MMC_CAP_NEEDS_POLL BIT(15) @@ -223,6 +224,7 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx) #define EXT_CSD_BOOT_BUS_WIDTH 177 #define EXT_CSD_PART_CONF 179 /* R/W */ #define EXT_CSD_BUS_WIDTH 183 /* R/W */ +#define EXT_CSD_STROBE_SUPPORT 184 /* R/W */ #define EXT_CSD_HS_TIMING 185 /* R/W */ #define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_CARD_TYPE 196 /* RO */ @@ -266,11 +268,13 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx) #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */ #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */ #define EXT_CSD_DDR_FLAG BIT(2) /* Flag for DDR mode */ +#define EXT_CSD_BUS_WIDTH_STROBE BIT(7) /* Enhanced strobe mode */ #define EXT_CSD_TIMING_LEGACY 0 /* no high speed */ #define EXT_CSD_TIMING_HS 1 /* HS */ #define EXT_CSD_TIMING_HS200 2 /* HS200 */ #define EXT_CSD_TIMING_HS400 3 /* HS400 */ +#define EXT_CSD_DRV_STR_SHIFT 4 /* Driver Strength shift */ #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) @@ -457,6 +461,11 @@ struct dm_mmc_ops { * @return 0 if dat0 is in the target state, -ve on error */ int (*wait_dat0)(struct udevice *dev, int state, int timeout); + +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) + /* set_enhanced_strobe() - set HS400 enhanced strobe */ + int (*set_enhanced_strobe)(struct udevice *dev); +#endif }; #define mmc_get_ops(dev) ((struct dm_mmc_ops *)(dev)->driver->ops) @@ -475,6 +484,7 @@ int mmc_getcd(struct mmc *mmc); int mmc_getwp(struct mmc *mmc); int mmc_execute_tuning(struct mmc *mmc, uint opcode); int mmc_wait_dat0(struct mmc *mmc, int state, int timeout); +int mmc_set_enhanced_strobe(struct mmc *mmc); #else struct mmc_ops { @@ -520,6 +530,7 @@ enum bus_mode { UHS_SDR104, MMC_HS_200, MMC_HS_400, + MMC_HS_400_ES, MMC_MODES_END }; @@ -538,6 +549,10 @@ static inline bool mmc_is_mode_ddr(enum bus_mode mode) else if (mode == MMC_HS_400) return true; #endif +#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) + else if (mode == MMC_HS_400_ES) + return true; +#endif else return false; }