From: Alexandru Tachici Date: Mon, 6 Sep 2021 06:56:30 +0000 (+0300) Subject: iio: adc: ad7793: Fix IRQ flag X-Git-Tag: v5.10.79~259 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4425d059aa2e907c04771bb6550f31973c843262;p=platform%2Fkernel%2Flinux-rpi.git iio: adc: ad7793: Fix IRQ flag commit 1a913270e57a8e7f1e3789802f1f64e6d0654626 upstream. In Sigma-Delta devices the SDO line is also used as an interrupt. Leaving IRQ on level instead of falling might trigger a sample read when the IRQ is enabled, as the SDO line is already low. Not sure if SDO line will always immediately go high in ad_sd_buffer_postenable before the IRQ is enabled. Also the datasheet seem to explicitly say the falling edge of the SDO should be used as an interrupt: >From the AD7793 datasheet: " The DOUT/RDY falling edge can be used as an interrupt to a processor" Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags") Signed-off-by: Alexandru Tachici Cc: Link: https://lore.kernel.org/r/20210906065630.16325-4-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c index 440ef4c..7c9c95c 100644 --- a/drivers/iio/adc/ad7793.c +++ b/drivers/iio/adc/ad7793.c @@ -206,7 +206,7 @@ static const struct ad_sigma_delta_info ad7793_sigma_delta_info = { .has_registers = true, .addr_shift = 3, .read_mask = BIT(6), - .irq_flags = IRQF_TRIGGER_LOW, + .irq_flags = IRQF_TRIGGER_FALLING, }; static const struct ad_sd_calib_data ad7793_calib_arr[6] = {