From: Peter Rosin <peda@axentia.se>
Date: Wed, 21 Mar 2018 15:35:51 +0000 (+0100)
Subject: ARM: dts: at91rm9200: pullup rx on uart0
X-Git-Tag: v5.15~9103^2~18^2~1
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=43d9af3f1994d81a7aedd19990330613ad2b731c;p=platform%2Fkernel%2Flinux-starfive.git

ARM: dts: at91rm9200: pullup rx on uart0

For consistency with all other serial pins, add this pullup. It also
prevents the signal from floating and so consuming a useless extra amount
of power in crowbarred state if nothing is connected to RX.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---

diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 3f3149c..2ad69a7 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -493,8 +493,8 @@
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
-							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA18 periph A */
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_uart0_cts: uart0_cts-0 {