From: Sujith Manoharan Date: Thu, 2 Jan 2014 04:36:21 +0000 (+0530) Subject: ath9k: Fix AR955x RX sensitivity X-Git-Tag: v4.0~2533^2~3^2^2~88 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=42dd98b028912c1a27cb6bd26fe5014eeab97202;p=platform%2Fkernel%2Flinux-amlogic.git ath9k: Fix AR955x RX sensitivity AR955x has problems with RX sensitivity in 2G. This patch adds a routine to select range_osdac dynamically on a per-chain basis to address this issue. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 97e09d5..8c145cd 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -326,6 +326,224 @@ static void ar9003_hw_init_cal_settings(struct ath_hw *ah) ah->supp_cals = IQ_MISMATCH_CAL; } +#define OFF_UPPER_LT 24 +#define OFF_LOWER_LT 7 + +static bool ar9003_hw_dynamic_osdac_selection(struct ath_hw *ah, + bool txiqcal_done) +{ + struct ath_common *common = ath9k_hw_common(ah); + int ch0_done, osdac_ch0, dc_off_ch0_i1, dc_off_ch0_q1, dc_off_ch0_i2, + dc_off_ch0_q2, dc_off_ch0_i3, dc_off_ch0_q3; + int ch1_done, osdac_ch1, dc_off_ch1_i1, dc_off_ch1_q1, dc_off_ch1_i2, + dc_off_ch1_q2, dc_off_ch1_i3, dc_off_ch1_q3; + int ch2_done, osdac_ch2, dc_off_ch2_i1, dc_off_ch2_q1, dc_off_ch2_i2, + dc_off_ch2_q2, dc_off_ch2_i3, dc_off_ch2_q3; + bool status; + u32 temp, val; + + /* + * Clear offset and IQ calibration, run AGC cal. + */ + REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_OFFSET_CAL); + REG_CLR_BIT(ah, AR_PHY_TX_IQCAL_CONTROL_0, + AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL); + REG_WRITE(ah, AR_PHY_AGC_CONTROL, + REG_READ(ah, AR_PHY_AGC_CONTROL) | AR_PHY_AGC_CONTROL_CAL); + + status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_CAL, + 0, AH_WAIT_TIMEOUT); + if (!status) { + ath_dbg(common, CALIBRATE, + "AGC cal without offset cal failed to complete in 1ms"); + return false; + } + + /* + * Allow only offset calibration and disable the others + * (Carrier Leak calibration, TX Filter calibration and + * Peak Detector offset calibration). + */ + REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_OFFSET_CAL); + REG_CLR_BIT(ah, AR_PHY_CL_CAL_CTL, + AR_PHY_CL_CAL_ENABLE); + REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_FLTR_CAL); + REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_PKDET_CAL); + + ch0_done = 0; + ch1_done = 0; + ch2_done = 0; + + while ((ch0_done == 0) || (ch1_done == 0) || (ch2_done == 0)) { + osdac_ch0 = (REG_READ(ah, AR_PHY_65NM_CH0_BB1) >> 30) & 0x3; + osdac_ch1 = (REG_READ(ah, AR_PHY_65NM_CH1_BB1) >> 30) & 0x3; + osdac_ch2 = (REG_READ(ah, AR_PHY_65NM_CH2_BB1) >> 30) & 0x3; + + REG_SET_BIT(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); + + REG_WRITE(ah, AR_PHY_AGC_CONTROL, + REG_READ(ah, AR_PHY_AGC_CONTROL) | AR_PHY_AGC_CONTROL_CAL); + + status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_CAL, + 0, AH_WAIT_TIMEOUT); + if (!status) { + ath_dbg(common, CALIBRATE, + "DC offset cal failed to complete in 1ms"); + return false; + } + + REG_CLR_BIT(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); + + /* + * High gain. + */ + REG_WRITE(ah, AR_PHY_65NM_CH0_BB3, + ((REG_READ(ah, AR_PHY_65NM_CH0_BB3) & 0xfffffcff) | (1 << 8))); + REG_WRITE(ah, AR_PHY_65NM_CH1_BB3, + ((REG_READ(ah, AR_PHY_65NM_CH1_BB3) & 0xfffffcff) | (1 << 8))); + REG_WRITE(ah, AR_PHY_65NM_CH2_BB3, + ((REG_READ(ah, AR_PHY_65NM_CH2_BB3) & 0xfffffcff) | (1 << 8))); + + temp = REG_READ(ah, AR_PHY_65NM_CH0_BB3); + dc_off_ch0_i1 = (temp >> 26) & 0x1f; + dc_off_ch0_q1 = (temp >> 21) & 0x1f; + + temp = REG_READ(ah, AR_PHY_65NM_CH1_BB3); + dc_off_ch1_i1 = (temp >> 26) & 0x1f; + dc_off_ch1_q1 = (temp >> 21) & 0x1f; + + temp = REG_READ(ah, AR_PHY_65NM_CH2_BB3); + dc_off_ch2_i1 = (temp >> 26) & 0x1f; + dc_off_ch2_q1 = (temp >> 21) & 0x1f; + + /* + * Low gain. + */ + REG_WRITE(ah, AR_PHY_65NM_CH0_BB3, + ((REG_READ(ah, AR_PHY_65NM_CH0_BB3) & 0xfffffcff) | (2 << 8))); + REG_WRITE(ah, AR_PHY_65NM_CH1_BB3, + ((REG_READ(ah, AR_PHY_65NM_CH1_BB3) & 0xfffffcff) | (2 << 8))); + REG_WRITE(ah, AR_PHY_65NM_CH2_BB3, + ((REG_READ(ah, AR_PHY_65NM_CH2_BB3) & 0xfffffcff) | (2 << 8))); + + temp = REG_READ(ah, AR_PHY_65NM_CH0_BB3); + dc_off_ch0_i2 = (temp >> 26) & 0x1f; + dc_off_ch0_q2 = (temp >> 21) & 0x1f; + + temp = REG_READ(ah, AR_PHY_65NM_CH1_BB3); + dc_off_ch1_i2 = (temp >> 26) & 0x1f; + dc_off_ch1_q2 = (temp >> 21) & 0x1f; + + temp = REG_READ(ah, AR_PHY_65NM_CH2_BB3); + dc_off_ch2_i2 = (temp >> 26) & 0x1f; + dc_off_ch2_q2 = (temp >> 21) & 0x1f; + + /* + * Loopback. + */ + REG_WRITE(ah, AR_PHY_65NM_CH0_BB3, + ((REG_READ(ah, AR_PHY_65NM_CH0_BB3) & 0xfffffcff) | (3 << 8))); + REG_WRITE(ah, AR_PHY_65NM_CH1_BB3, + ((REG_READ(ah, AR_PHY_65NM_CH1_BB3) & 0xfffffcff) | (3 << 8))); + REG_WRITE(ah, AR_PHY_65NM_CH2_BB3, + ((REG_READ(ah, AR_PHY_65NM_CH2_BB3) & 0xfffffcff) | (3 << 8))); + + temp = REG_READ(ah, AR_PHY_65NM_CH0_BB3); + dc_off_ch0_i3 = (temp >> 26) & 0x1f; + dc_off_ch0_q3 = (temp >> 21) & 0x1f; + + temp = REG_READ(ah, AR_PHY_65NM_CH1_BB3); + dc_off_ch1_i3 = (temp >> 26) & 0x1f; + dc_off_ch1_q3 = (temp >> 21) & 0x1f; + + temp = REG_READ(ah, AR_PHY_65NM_CH2_BB3); + dc_off_ch2_i3 = (temp >> 26) & 0x1f; + dc_off_ch2_q3 = (temp >> 21) & 0x1f; + + if ((dc_off_ch0_i1 > OFF_UPPER_LT) || (dc_off_ch0_i1 < OFF_LOWER_LT) || + (dc_off_ch0_i2 > OFF_UPPER_LT) || (dc_off_ch0_i2 < OFF_LOWER_LT) || + (dc_off_ch0_i3 > OFF_UPPER_LT) || (dc_off_ch0_i3 < OFF_LOWER_LT) || + (dc_off_ch0_q1 > OFF_UPPER_LT) || (dc_off_ch0_q1 < OFF_LOWER_LT) || + (dc_off_ch0_q2 > OFF_UPPER_LT) || (dc_off_ch0_q2 < OFF_LOWER_LT) || + (dc_off_ch0_q3 > OFF_UPPER_LT) || (dc_off_ch0_q3 < OFF_LOWER_LT)) { + if (osdac_ch0 == 3) { + ch0_done = 1; + } else { + osdac_ch0++; + + val = REG_READ(ah, AR_PHY_65NM_CH0_BB1) & 0x3fffffff; + val |= (osdac_ch0 << 30); + REG_WRITE(ah, AR_PHY_65NM_CH0_BB1, val); + + ch0_done = 0; + } + } else { + ch0_done = 1; + } + + if ((dc_off_ch1_i1 > OFF_UPPER_LT) || (dc_off_ch1_i1 < OFF_LOWER_LT) || + (dc_off_ch1_i2 > OFF_UPPER_LT) || (dc_off_ch1_i2 < OFF_LOWER_LT) || + (dc_off_ch1_i3 > OFF_UPPER_LT) || (dc_off_ch1_i3 < OFF_LOWER_LT) || + (dc_off_ch1_q1 > OFF_UPPER_LT) || (dc_off_ch1_q1 < OFF_LOWER_LT) || + (dc_off_ch1_q2 > OFF_UPPER_LT) || (dc_off_ch1_q2 < OFF_LOWER_LT) || + (dc_off_ch1_q3 > OFF_UPPER_LT) || (dc_off_ch1_q3 < OFF_LOWER_LT)) { + if (osdac_ch1 == 3) { + ch1_done = 1; + } else { + osdac_ch1++; + + val = REG_READ(ah, AR_PHY_65NM_CH1_BB1) & 0x3fffffff; + val |= (osdac_ch1 << 30); + REG_WRITE(ah, AR_PHY_65NM_CH1_BB1, val); + + ch1_done = 0; + } + } else { + ch1_done = 1; + } + + if ((dc_off_ch2_i1 > OFF_UPPER_LT) || (dc_off_ch2_i1 < OFF_LOWER_LT) || + (dc_off_ch2_i2 > OFF_UPPER_LT) || (dc_off_ch2_i2 < OFF_LOWER_LT) || + (dc_off_ch2_i3 > OFF_UPPER_LT) || (dc_off_ch2_i3 < OFF_LOWER_LT) || + (dc_off_ch2_q1 > OFF_UPPER_LT) || (dc_off_ch2_q1 < OFF_LOWER_LT) || + (dc_off_ch2_q2 > OFF_UPPER_LT) || (dc_off_ch2_q2 < OFF_LOWER_LT) || + (dc_off_ch2_q3 > OFF_UPPER_LT) || (dc_off_ch2_q3 < OFF_LOWER_LT)) { + if (osdac_ch2 == 3) { + ch2_done = 1; + } else { + osdac_ch2++; + + val = REG_READ(ah, AR_PHY_65NM_CH2_BB1) & 0x3fffffff; + val |= (osdac_ch2 << 30); + REG_WRITE(ah, AR_PHY_65NM_CH2_BB1, val); + + ch2_done = 0; + } + } else { + ch2_done = 1; + } + } + + REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_OFFSET_CAL); + REG_SET_BIT(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); + + /* + * We don't need to check txiqcal_done here since it is always + * set for AR9550. + */ + REG_SET_BIT(ah, AR_PHY_TX_IQCAL_CONTROL_0, + AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL); + + return true; +} + /* * solve 4x4 linear equation used in loopback iq cal. */ @@ -1271,6 +1489,11 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah, REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); } + if (AR_SREV_9550(ah) && IS_CHAN_2GHZ(chan)) { + if (!ar9003_hw_dynamic_osdac_selection(ah, txiqcal_done)) + return false; + } + skip_tx_iqcal: if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) { if (AR_SREV_9330_11(ah)) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 94a8598..5076715 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -670,6 +670,16 @@ #define AR_PHY_65NM_CH1_RXTX4 0x1650c #define AR_PHY_65NM_CH2_RXTX4 0x1690c +#define AR_PHY_65NM_CH0_BB1 0x16140 +#define AR_PHY_65NM_CH0_BB2 0x16144 +#define AR_PHY_65NM_CH0_BB3 0x16148 +#define AR_PHY_65NM_CH1_BB1 0x16540 +#define AR_PHY_65NM_CH1_BB2 0x16544 +#define AR_PHY_65NM_CH1_BB3 0x16548 +#define AR_PHY_65NM_CH2_BB1 0x16940 +#define AR_PHY_65NM_CH2_BB2 0x16944 +#define AR_PHY_65NM_CH2_BB3 0x16948 + #define AR_PHY_65NM_CH0_SYNTH12_VREFMUL3 0x00780000 #define AR_PHY_65NM_CH0_SYNTH12_VREFMUL3_S 19 #define AR_PHY_65NM_CH0_RXTX2_SYNTHON_MASK 0x00000004