From: Marek Vasut Date: Wed, 13 Apr 2022 02:15:24 +0000 (+0200) Subject: net: dm9000: Replace DM9000_DBG() with debug() X-Git-Tag: v2022.07~100^2~15 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=42a7e0f2d745348d623cd2f83fa0138abc27d5f2;p=platform%2Fkernel%2Fu-boot.git net: dm9000: Replace DM9000_DBG() with debug() Use standard debug() macro to print debug messages instead of reinventing driver-specific macro again. No functional change. Reviewed-by: Ramon Fried Signed-off-by: Marek Vasut Cc: Joe Hershberger Cc: Ramon Fried --- diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index 9369913..e83b838 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -63,7 +63,6 @@ TODO: external MII is not functional, only internal at the moment. /* #define CONFIG_DM9000_DEBUG */ #ifdef CONFIG_DM9000_DEBUG -#define DM9000_DBG(fmt,args...) printf(fmt, ##args) #define DM9000_DMP_PACKET(func,packet,length) \ do { \ int i; \ @@ -75,7 +74,6 @@ TODO: external MII is not functional, only internal at the moment. } printf("\n"); \ } while(0) #else -#define DM9000_DBG(fmt,args...) #define DM9000_DMP_PACKET(func,packet,length) #endif @@ -128,16 +126,16 @@ static void dm9000_iow(int reg, u8 value); static void dump_regs(void) { - DM9000_DBG("\n"); - DM9000_DBG("NCR (0x00): %02x\n", dm9000_ior(0)); - DM9000_DBG("NSR (0x01): %02x\n", dm9000_ior(1)); - DM9000_DBG("TCR (0x02): %02x\n", dm9000_ior(2)); - DM9000_DBG("TSRI (0x03): %02x\n", dm9000_ior(3)); - DM9000_DBG("TSRII (0x04): %02x\n", dm9000_ior(4)); - DM9000_DBG("RCR (0x05): %02x\n", dm9000_ior(5)); - DM9000_DBG("RSR (0x06): %02x\n", dm9000_ior(6)); - DM9000_DBG("ISR (0xFE): %02x\n", dm9000_ior(DM9000_ISR)); - DM9000_DBG("\n"); + debug("\n"); + debug("NCR (0x00): %02x\n", dm9000_ior(0)); + debug("NSR (0x01): %02x\n", dm9000_ior(1)); + debug("TCR (0x02): %02x\n", dm9000_ior(2)); + debug("TSRI (0x03): %02x\n", dm9000_ior(3)); + debug("TSRII (0x04): %02x\n", dm9000_ior(4)); + debug("RCR (0x05): %02x\n", dm9000_ior(5)); + debug("RSR (0x06): %02x\n", dm9000_ior(6)); + debug("ISR (0xFE): %02x\n", dm9000_ior(DM9000_ISR)); + debug("\n"); } #endif @@ -246,7 +244,7 @@ dm9000_probe(void) static void dm9000_reset(void) { - DM9000_DBG("resetting DM9000\n"); + debug("resetting DM9000\n"); /* Reset DM9000, see DM9000 Application Notes V1.22 Jun 11, 2004 page 29 */ @@ -259,7 +257,7 @@ dm9000_reset(void) dm9000_iow(DM9000_NCR, (NCR_LBK_INT_MAC | NCR_RST)); do { - DM9000_DBG("resetting the DM9000, 1st reset\n"); + debug("resetting the DM9000, 1st reset\n"); udelay(25); /* Wait at least 20 us */ } while (dm9000_ior(DM9000_NCR) & 1); @@ -267,7 +265,7 @@ dm9000_reset(void) dm9000_iow(DM9000_NCR, (NCR_LBK_INT_MAC | NCR_RST)); /* Issue a second reset */ do { - DM9000_DBG("resetting the DM9000, 2nd reset\n"); + debug("resetting the DM9000, 2nd reset\n"); udelay(25); /* Wait at least 20 us */ } while (dm9000_ior(DM9000_NCR) & 1); @@ -285,7 +283,7 @@ static int dm9000_init(struct eth_device *dev, struct bd_info *bd) u8 io_mode; struct board_info *db = &dm9000_info; - DM9000_DBG("%s\n", __func__); + debug("%s\n", __func__); /* RESET device */ dm9000_reset(); @@ -354,8 +352,8 @@ static int dm9000_init(struct eth_device *dev, struct bd_info *bd) /* read back mac, just to be sure */ for (i = 0, oft = 0x10; i < 6; i++, oft++) - DM9000_DBG("%02x:", dm9000_ior(oft)); - DM9000_DBG("\n"); + debug("%02x:", dm9000_ior(oft)); + debug("\n"); /* Activate DM9000 */ /* RX enable */ @@ -434,7 +432,7 @@ static int dm9000_send(struct eth_device *netdev, void *packet, int length) } dm9000_iow(DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */ - DM9000_DBG("transmit done\n\n"); + debug("transmit done\n\n"); return 0; } @@ -444,7 +442,7 @@ static int dm9000_send(struct eth_device *netdev, void *packet, int length) */ static void dm9000_halt(struct eth_device *netdev) { - DM9000_DBG("%s\n", __func__); + debug("%s\n", __func__); /* RESET devie */ dm9000_phy_write(0, 0x8000); /* PHY RESET */ @@ -490,12 +488,12 @@ static int dm9000_rx(struct eth_device *netdev) if (rxbyte != DM9000_PKT_RDY) return 0; /* No packet received, ignore */ - DM9000_DBG("receiving packet\n"); + debug("receiving packet\n"); /* A packet ready now & Get status/length */ (db->rx_status)(&RxStatus, &RxLen); - DM9000_DBG("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen); + debug("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen); /* Move data from DM9000 */ /* Read received packet from RX SRAM */ @@ -519,7 +517,7 @@ static int dm9000_rx(struct eth_device *netdev) } else { DM9000_DMP_PACKET(__func__ , rdptr, RxLen); - DM9000_DBG("passing packet to upper layer\n"); + debug("passing packet to upper layer\n"); net_process_received_packet(net_rx_packets[0], RxLen); } } @@ -596,7 +594,7 @@ dm9000_phy_read(int reg) val = (dm9000_ior(DM9000_EPDRH) << 8) | dm9000_ior(DM9000_EPDRL); /* The read data keeps on REG_0D & REG_0E */ - DM9000_DBG("dm9000_phy_read(0x%x): 0x%x\n", reg, val); + debug("dm9000_phy_read(0x%x): 0x%x\n", reg, val); return val; } @@ -616,7 +614,7 @@ dm9000_phy_write(int reg, u16 value) dm9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */ udelay(500); /* Wait write complete */ dm9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */ - DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value); + debug("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value); } int dm9000_initialize(struct bd_info *bis)