From: David Daney Date: Wed, 2 May 2012 15:16:39 +0000 (+0000) Subject: netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines. X-Git-Tag: v3.5-rc1~109^2~148 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=416912a129349788372e6ac27ab86bd9b18c8cc0;p=platform%2Fupstream%2Fkernel-adaptation-pc.git netdev/of/phy: Add MDIO bus multiplexer driven by GPIO lines. The GPIO pins select which sub bus is connected to the master. Initially tested with an sn74cbtlv3253 switch device wired into the MDIO bus. Signed-off-by: David Daney Signed-off-by: David S. Miller --- diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt new file mode 100644 index 0000000..7938411 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt @@ -0,0 +1,127 @@ +Properties for an MDIO bus multiplexer/switch controlled by GPIO pins. + +This is a special case of a MDIO bus multiplexer. One or more GPIO +lines are used to control which child bus is connected. + +Required properties in addition to the generic multiplexer properties: + +- compatible : mdio-mux-gpio. +- gpios : GPIO specifiers for each GPIO line. One or more must be specified. + + +Example : + + /* The parent MDIO bus. */ + smi1: mdio@1180000001900 { + compatible = "cavium,octeon-3860-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0x00001900 0x0 0x40>; + }; + + /* + An NXP sn74cbtlv3253 dual 1-of-4 switch controlled by a + pair of GPIO lines. Child busses 2 and 3 populated with 4 + PHYs each. + */ + mdio-mux { + compatible = "mdio-mux-gpio"; + gpios = <&gpio1 3 0>, <&gpio1 4 0>; + mdio-parent-bus = <&smi1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + phy11: ethernet-phy@1 { + reg = <1>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + phy12: ethernet-phy@2 { + reg = <2>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + phy13: ethernet-phy@3 { + reg = <3>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + phy14: ethernet-phy@4 { + reg = <4>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <10 8>; /* Pin 10, active low */ + }; + }; + + mdio@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + phy21: ethernet-phy@1 { + reg = <1>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + phy22: ethernet-phy@2 { + reg = <2>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + phy23: ethernet-phy@3 { + reg = <3>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + phy24: ethernet-phy@4 { + reg = <4>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + }; + }; diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 99c0674..944cdfb 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -144,6 +144,16 @@ config MDIO_BUS_MUX to a parent bus. Switching between child busses is done by device specific drivers. +config MDIO_BUS_MUX_GPIO + tristate "Support for GPIO controlled MDIO bus multiplexers" + depends on OF_GPIO && OF_MDIO + select MDIO_BUS_MUX + help + This module provides a driver for MDIO bus multiplexers that + are controlled via GPIO lines. The multiplexer connects one of + several child MDIO busses to a parent bus. Child bus + selection is under the control of GPIO lines. + endif # PHYLIB config MICREL_KS8995MA diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index a6b50e7..f51af68 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o obj-$(CONFIG_AMD_PHY) += amd.o obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o +obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c new file mode 100644 index 0000000..e0cc4ef --- /dev/null +++ b/drivers/net/phy/mdio-mux-gpio.c @@ -0,0 +1,142 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011, 2012 Cavium, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_VERSION "1.0" +#define DRV_DESCRIPTION "GPIO controlled MDIO bus multiplexer driver" + +#define MDIO_MUX_GPIO_MAX_BITS 8 + +struct mdio_mux_gpio_state { + int gpio[MDIO_MUX_GPIO_MAX_BITS]; + unsigned int num_gpios; + void *mux_handle; +}; + +static int mdio_mux_gpio_switch_fn(int current_child, int desired_child, + void *data) +{ + int change; + unsigned int n; + struct mdio_mux_gpio_state *s = data; + + if (current_child == desired_child) + return 0; + + change = current_child == -1 ? -1 : current_child ^ desired_child; + + for (n = 0; n < s->num_gpios; n++) { + if (change & 1) + gpio_set_value_cansleep(s->gpio[n], + (desired_child & 1) != 0); + change >>= 1; + desired_child >>= 1; + } + + return 0; +} + +static int __devinit mdio_mux_gpio_probe(struct platform_device *pdev) +{ + enum of_gpio_flags f; + struct mdio_mux_gpio_state *s; + unsigned int num_gpios; + unsigned int n; + int r; + + if (!pdev->dev.of_node) + return -ENODEV; + + num_gpios = of_gpio_count(pdev->dev.of_node); + if (num_gpios == 0 || num_gpios > MDIO_MUX_GPIO_MAX_BITS) + return -ENODEV; + + s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); + if (!s) + return -ENOMEM; + + s->num_gpios = num_gpios; + + for (n = 0; n < num_gpios; ) { + int gpio = of_get_gpio_flags(pdev->dev.of_node, n, &f); + if (gpio < 0) { + r = (gpio == -ENODEV) ? -EPROBE_DEFER : gpio; + goto err; + } + s->gpio[n] = gpio; + + n++; + + r = gpio_request(gpio, "mdio_mux_gpio"); + if (r) + goto err; + + r = gpio_direction_output(gpio, 0); + if (r) + goto err; + } + + r = mdio_mux_init(&pdev->dev, + mdio_mux_gpio_switch_fn, &s->mux_handle, s); + + if (r == 0) { + pdev->dev.platform_data = s; + return 0; + } +err: + while (n) { + n--; + gpio_free(s->gpio[n]); + } + devm_kfree(&pdev->dev, s); + return r; +} + +static int __devexit mdio_mux_gpio_remove(struct platform_device *pdev) +{ + struct mdio_mux_gpio_state *s = pdev->dev.platform_data; + mdio_mux_uninit(s->mux_handle); + return 0; +} + +static struct of_device_id mdio_mux_gpio_match[] = { + { + .compatible = "mdio-mux-gpio", + }, + { + /* Legacy compatible property. */ + .compatible = "cavium,mdio-mux-sn74cbtlv3253", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, mdio_mux_gpio_match); + +static struct platform_driver mdio_mux_gpio_driver = { + .driver = { + .name = "mdio-mux-gpio", + .owner = THIS_MODULE, + .of_match_table = mdio_mux_gpio_match, + }, + .probe = mdio_mux_gpio_probe, + .remove = __devexit_p(mdio_mux_gpio_remove), +}; + +module_platform_driver(mdio_mux_gpio_driver); + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("David Daney"); +MODULE_LICENSE("GPL");