From: Manuel Lauss Date: Wed, 23 Jul 2014 14:36:52 +0000 (+0200) Subject: MIPS: Alchemy: db1x00: use clk framework X-Git-Tag: v3.17-rc1~92^2~113 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=415e0fec7a388dbe224057c1134737e23710aa9b;p=platform%2Fkernel%2Flinux-exynos.git MIPS: Alchemy: db1x00: use clk framework Make use of the clk framework to set up and enable all PSC clocks. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/7469/ Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index 5ccfd83..7761889 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -18,6 +18,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include #include #include @@ -129,7 +130,6 @@ static int __init db1200_detect_board(void) int __init db1200_board_setup(void) { - unsigned long freq0, clksrc, div, pfc; unsigned short whoami; if (db1200_detect_board()) @@ -149,30 +149,6 @@ int __init db1200_board_setup(void) " Board-ID %d Daughtercard ID %d\n", get_system_type(), (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); - /* SMBus/SPI on PSC0, Audio on PSC1 */ - pfc = alchemy_rdsys(AU1000_SYS_PINFUNC); - pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); - pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); - pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ - alchemy_wrsys(pfc, AU1000_SYS_PINFUNC); - - /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from - * CPU clock; all other clock generators off/unused. - */ - div = (get_au1x00_speed() + 25000000) / 50000000; - if (div & 1) - div++; - div = ((div >> 1) - 1) & 0xff; - - freq0 = div << SYS_FC_FRDIV0_BIT; - alchemy_wrsys(freq0, AU1000_SYS_FREQCTRL0); - freq0 |= SYS_FC_FE0; /* enable F0 */ - alchemy_wrsys(freq0, AU1000_SYS_FREQCTRL0); - - /* psc0_intclk comes 1:1 from F0 */ - clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT; - alchemy_wrsys(clksrc, AU1000_SYS_CLKSRC); - return 0; } @@ -843,6 +819,7 @@ int __init db1200_dev_setup(void) unsigned long pfc; unsigned short sw; int swapped, bid; + struct clk *c; bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); if ((bid == BCSR_WHOAMI_PB1200_DDR1) || @@ -855,6 +832,24 @@ int __init db1200_dev_setup(void) irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW); bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); + /* SMBus/SPI on PSC0, Audio on PSC1 */ + pfc = alchemy_rdsys(AU1000_SYS_PINFUNC); + pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); + pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ + alchemy_wrsys(pfc, AU1000_SYS_PINFUNC); + + /* get 50MHz for I2C driver on PSC0 */ + c = clk_get(NULL, "psc0_intclk"); + if (!IS_ERR(c)) { + pfc = clk_round_rate(c, 50000000); + if ((pfc < 1) || (abs(50000000 - pfc) > 2500000)) + pr_warn("DB1200: cant get I2C close to 50MHz\n"); + else + clk_set_rate(c, pfc); + clk_put(c); + } + /* insert/eject pairs: one of both is always screaming. To avoid * issues they must not be automatically enabled when initially * requested. @@ -927,6 +922,11 @@ int __init db1200_dev_setup(void) } /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ + c = clk_get(NULL, "psc1_intclk"); + if (!IS_ERR(c)) { + clk_prepare_enable(c); + clk_put(c); + } __raw_writel(PSC_SEL_CLK_SERCLK, (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); wmb(); diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c index c80e5b9..ef93ee3 100644 --- a/arch/mips/alchemy/devboards/db1300.c +++ b/arch/mips/alchemy/devboards/db1300.c @@ -4,6 +4,7 @@ * (c) 2009 Manuel Lauss */ +#include #include #include #include @@ -731,6 +732,7 @@ static struct platform_device *db1300_dev[] __initdata = { int __init db1300_dev_setup(void) { int swapped, cpldirq; + struct clk *c; /* setup CPLD IRQ muxer */ cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1); @@ -761,6 +763,11 @@ int __init db1300_dev_setup(void) (void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET); wmb(); /* I2C uses internal 48MHz EXTCLK1 */ + c = clk_get(NULL, "psc3_intclk"); + if (!IS_ERR(c)) { + clk_prepare_enable(c); + clk_put(c); + } __raw_writel(PSC_SEL_CLK_INTCLK, (void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET); wmb(); diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c index d132066..7e89936 100644 --- a/arch/mips/alchemy/devboards/db1550.c +++ b/arch/mips/alchemy/devboards/db1550.c @@ -4,6 +4,7 @@ * (c) 2011 Manuel Lauss */ +#include #include #include #include @@ -574,6 +575,7 @@ static void __init pb1550_devices(void) int __init db1550_dev_setup(void) { int swapped, id; + struct clk *c; id = (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) != BCSR_WHOAMI_DB1550); @@ -582,6 +584,17 @@ int __init db1550_dev_setup(void) spi_register_board_info(db1550_spi_devs, ARRAY_SIZE(db1550_i2c_devs)); + c = clk_get(NULL, "psc0_intclk"); + if (!IS_ERR(c)) { + clk_prepare_enable(c); + clk_put(c); + } + c = clk_get(NULL, "psc2_intclk"); + if (!IS_ERR(c)) { + clk_prepare_enable(c); + clk_put(c); + } + /* Audio PSC clock is supplied by codecs (PSC1, 3) FIXME: platdata!! */ __raw_writel(PSC_SEL_CLK_SERCLK, (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);