From: Michael Chan Date: Wed, 1 Jan 2014 07:22:33 +0000 (-0800) Subject: bnx2: Enable auto-mdix when autoneg is disabled. X-Git-Tag: accepted/tizen/common/20141203.182822~719^2~338 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=41033b65b98388cb255c0307ea869856f71ca80d;p=platform%2Fkernel%2Flinux-arm64.git bnx2: Enable auto-mdix when autoneg is disabled. Auto-mdix currently only works if autoneg is enabled. This patch enables auto-mdix all the time by setting a bit in a PHY register. Define meaningful constants for this PHY registers. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 1ae3348..b380c69 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -2343,9 +2343,15 @@ bnx2_init_copper_phy(struct bnx2 *bp, int reset_phy) } /* ethernet@wirespeed */ - bnx2_write_phy(bp, 0x18, 0x7007); - bnx2_read_phy(bp, 0x18, &val); - bnx2_write_phy(bp, 0x18, val | (1 << 15) | (1 << 4)); + bnx2_write_phy(bp, MII_BNX2_AUX_CTL, AUX_CTL_MISC_CTL); + bnx2_read_phy(bp, MII_BNX2_AUX_CTL, &val); + val |= AUX_CTL_MISC_CTL_WR | AUX_CTL_MISC_CTL_WIRESPEED; + + /* auto-mdix */ + if (BNX2_CHIP(bp) == BNX2_CHIP_5709) + val |= AUX_CTL_MISC_CTL_AUTOMDIX; + + bnx2_write_phy(bp, MII_BNX2_AUX_CTL, val); return 0; } diff --git a/drivers/net/ethernet/broadcom/bnx2.h b/drivers/net/ethernet/broadcom/bnx2.h index 18cb2d2..39f40d1 100644 --- a/drivers/net/ethernet/broadcom/bnx2.h +++ b/drivers/net/ethernet/broadcom/bnx2.h @@ -6471,6 +6471,12 @@ struct l2_fhdr { #define BCM5708S_TX_ACTL3 0x17 +#define MII_BNX2_AUX_CTL 0x18 +#define AUX_CTL_MISC_CTL 0x7007 +#define AUX_CTL_MISC_CTL_WIRESPEED (1 << 4) +#define AUX_CTL_MISC_CTL_AUTOMDIX (1 << 9) +#define AUX_CTL_MISC_CTL_WR (1 << 15) + #define MII_BNX2_DSP_RW_PORT 0x15 #define MII_BNX2_DSP_ADDRESS 0x17 #define MII_BNX2_DSP_EXPAND_REG 0x0f00