From: Rajesh Borundia Date: Fri, 19 Apr 2013 07:01:11 +0000 (+0000) Subject: qlcnic: Support MAC address, Tx rate config. X-Git-Tag: v3.10-rc1~66^2~95^2~4 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4000e7a78d12d71e37fcd2366c73fcb02e97fffb;p=platform%2Fkernel%2Flinux-exynos.git qlcnic: Support MAC address, Tx rate config. o Add support for MAC address and Tx rate configuration per VF via iproute2 tool. o Tx rate change is allowed while the guest is running and the VF driver is loaded. o MAC address change is allowed only when VF driver is not loaded. Signed-off-by: Manish Chopra Signed-off-by: Sucheta Chakraborty Signed-off-by: Rajesh Borundia Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 33f154e..b3ab7a3 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -341,6 +341,11 @@ static const struct net_device_ops qlcnic_netdev_ops = { #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = qlcnic_poll_controller, #endif +#ifdef CONFIG_QLCNIC_SRIOV + .ndo_set_vf_mac = qlcnic_sriov_set_vf_mac, + .ndo_set_vf_tx_rate = qlcnic_sriov_set_vf_tx_rate, + .ndo_get_vf_config = qlcnic_sriov_get_vf_config, +#endif }; static const struct net_device_ops qlcnic_netdev_failed_ops = { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h index 72db8b1..5f73d42 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h @@ -116,6 +116,8 @@ struct qlcnic_resources { struct qlcnic_vport { u16 handle; + u16 max_tx_bw; + u16 min_tx_bw; u8 mac[6]; }; @@ -173,6 +175,8 @@ void qlcnic_sriov_cleanup_async_list(struct qlcnic_back_channel *); void qlcnic_sriov_cleanup_list(struct qlcnic_trans_list *); int __qlcnic_sriov_add_act_list(struct qlcnic_sriov *, struct qlcnic_vf_info *, struct qlcnic_bc_trans *); +int qlcnic_sriov_get_vf_vport_info(struct qlcnic_adapter *, + struct qlcnic_info *, u16); static inline bool qlcnic_sriov_enable_check(struct qlcnic_adapter *adapter) { @@ -199,6 +203,10 @@ bool qlcnic_sriov_soft_flr_check(struct qlcnic_adapter *, struct qlcnic_vf_info *); void qlcnic_sriov_pf_reset(struct qlcnic_adapter *); int qlcnic_sriov_pf_reinit(struct qlcnic_adapter *); +int qlcnic_sriov_set_vf_mac(struct net_device *, int, u8 *); +int qlcnic_sriov_set_vf_tx_rate(struct net_device *, int, int); +int qlcnic_sriov_get_vf_config(struct net_device *, int , + struct ifla_vf_info *); #else static inline void qlcnic_sriov_pf_disable(struct qlcnic_adapter *adapter) {} static inline void qlcnic_sriov_pf_cleanup(struct qlcnic_adapter *adapter) {} diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index 305c7cd..b00cba9 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -181,6 +181,7 @@ int qlcnic_sriov_init(struct qlcnic_adapter *adapter, int num_vfs) goto qlcnic_destroy_async_wq; } sriov->vf_info[i].vp = vp; + vp->max_tx_bw = MAX_BW; random_ether_addr(vp->mac); dev_info(&adapter->pdev->dev, "MAC Address %pM is configured for VF %d\n", @@ -378,12 +379,83 @@ static void qlcnic_sriov_vf_cfg_buff_desc(struct qlcnic_adapter *adapter) adapter->max_rds_rings = MAX_RDS_RINGS; } +int qlcnic_sriov_get_vf_vport_info(struct qlcnic_adapter *adapter, + struct qlcnic_info *npar_info, u16 vport_id) +{ + struct device *dev = &adapter->pdev->dev; + struct qlcnic_cmd_args cmd; + int err; + u32 status; + + err = qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_NIC_INFO); + if (err) + return err; + + cmd.req.arg[1] = vport_id << 16 | 0x1; + err = qlcnic_issue_cmd(adapter, &cmd); + if (err) { + dev_err(&adapter->pdev->dev, + "Failed to get vport info, err=%d\n", err); + qlcnic_free_mbx_args(&cmd); + return err; + } + + status = cmd.rsp.arg[2] & 0xffff; + if (status & BIT_0) + npar_info->min_tx_bw = MSW(cmd.rsp.arg[2]); + if (status & BIT_1) + npar_info->max_tx_bw = LSW(cmd.rsp.arg[3]); + if (status & BIT_2) + npar_info->max_tx_ques = MSW(cmd.rsp.arg[3]); + if (status & BIT_3) + npar_info->max_tx_mac_filters = LSW(cmd.rsp.arg[4]); + if (status & BIT_4) + npar_info->max_rx_mcast_mac_filters = MSW(cmd.rsp.arg[4]); + if (status & BIT_5) + npar_info->max_rx_ucast_mac_filters = LSW(cmd.rsp.arg[5]); + if (status & BIT_6) + npar_info->max_rx_ip_addr = MSW(cmd.rsp.arg[5]); + if (status & BIT_7) + npar_info->max_rx_lro_flow = LSW(cmd.rsp.arg[6]); + if (status & BIT_8) + npar_info->max_rx_status_rings = MSW(cmd.rsp.arg[6]); + if (status & BIT_9) + npar_info->max_rx_buf_rings = LSW(cmd.rsp.arg[7]); + + npar_info->max_rx_ques = MSW(cmd.rsp.arg[7]); + npar_info->max_tx_vlan_keys = LSW(cmd.rsp.arg[8]); + npar_info->max_local_ipv6_addrs = MSW(cmd.rsp.arg[8]); + npar_info->max_remote_ipv6_addrs = LSW(cmd.rsp.arg[9]); + + dev_info(dev, "\n\tmin_tx_bw: %d, max_tx_bw: %d max_tx_ques: %d,\n" + "\tmax_tx_mac_filters: %d max_rx_mcast_mac_filters: %d,\n" + "\tmax_rx_ucast_mac_filters: 0x%x, max_rx_ip_addr: %d,\n" + "\tmax_rx_lro_flow: %d max_rx_status_rings: %d,\n" + "\tmax_rx_buf_rings: %d, max_rx_ques: %d, max_tx_vlan_keys %d\n" + "\tlocal_ipv6_addr: %d, remote_ipv6_addr: %d\n", + npar_info->min_tx_bw, npar_info->max_tx_bw, + npar_info->max_tx_ques, npar_info->max_tx_mac_filters, + npar_info->max_rx_mcast_mac_filters, + npar_info->max_rx_ucast_mac_filters, npar_info->max_rx_ip_addr, + npar_info->max_rx_lro_flow, npar_info->max_rx_status_rings, + npar_info->max_rx_buf_rings, npar_info->max_rx_ques, + npar_info->max_tx_vlan_keys, npar_info->max_local_ipv6_addrs, + npar_info->max_remote_ipv6_addrs); + + qlcnic_free_mbx_args(&cmd); + return err; +} + static int qlcnic_sriov_vf_init_driver(struct qlcnic_adapter *adapter) { struct qlcnic_info nic_info; struct qlcnic_hardware_context *ahw = adapter->ahw; int err; + err = qlcnic_sriov_get_vf_vport_info(adapter, &nic_info, 0); + if (err) + return err; + err = qlcnic_get_nic_info(adapter, &nic_info, ahw->pci_func); if (err) return -EIO; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index a013529..59d385b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -10,6 +10,8 @@ #include #define QLCNIC_SRIOV_VF_MAX_MAC 1 +#define QLC_VF_MIN_TX_RATE 100 +#define QLC_VF_MAX_TX_RATE 9999 static int qlcnic_sriov_pf_get_vport_handle(struct qlcnic_adapter *, u8); @@ -62,8 +64,9 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter, { struct qlcnic_sriov *sriov = adapter->ahw->sriov; struct qlcnic_resources *res = &sriov->ff_max; - int ret = -EIO, vpid; u32 temp, num_vf_macs, num_vfs, max; + int ret = -EIO, vpid, id; + struct qlcnic_vport *vp; vpid = qlcnic_sriov_pf_get_vport_handle(adapter, func); if (vpid < 0) @@ -72,8 +75,6 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter, num_vfs = sriov->num_vfs; max = num_vfs + 1; info->bit_offsets = 0xffff; - info->min_tx_bw = 0; - info->max_tx_bw = MAX_BW; info->max_tx_ques = res->num_tx_queues / max; info->max_rx_mcast_mac_filters = res->num_rx_mcast_mac_filters; num_vf_macs = QLCNIC_SRIOV_VF_MAX_MAC; @@ -83,7 +84,15 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter, info->max_rx_ucast_mac_filters = temp; temp = res->num_tx_mac_filters - (num_vfs * num_vf_macs); info->max_tx_mac_filters = temp; + info->min_tx_bw = 0; + info->max_tx_bw = MAX_BW; } else { + id = qlcnic_sriov_func_to_index(adapter, func); + if (id < 0) + return id; + vp = sriov->vf_info[id].vp; + info->min_tx_bw = vp->min_tx_bw; + info->max_tx_bw = vp->max_tx_bw; info->max_rx_ucast_mac_filters = num_vf_macs; info->max_tx_mac_filters = num_vf_macs; } @@ -1416,3 +1425,119 @@ int qlcnic_sriov_pf_reinit(struct qlcnic_adapter *adapter) __func__, ahw->op_mode); return err; } + +int qlcnic_sriov_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + struct qlcnic_sriov *sriov = adapter->ahw->sriov; + int i, num_vfs = sriov->num_vfs; + struct qlcnic_vf_info *vf_info; + u8 *curr_mac; + + if (!qlcnic_sriov_pf_check(adapter)) + return -EOPNOTSUPP; + + if (!is_valid_ether_addr(mac) || vf >= num_vfs) + return -EINVAL; + + if (!compare_ether_addr(adapter->mac_addr, mac)) { + netdev_err(netdev, "MAC address is already in use by the PF\n"); + return -EINVAL; + } + + for (i = 0; i < num_vfs; i++) { + vf_info = &sriov->vf_info[i]; + if (!compare_ether_addr(vf_info->vp->mac, mac)) { + netdev_err(netdev, + "MAC address is already in use by VF %d\n", + i); + return -EINVAL; + } + } + + vf_info = &sriov->vf_info[vf]; + curr_mac = vf_info->vp->mac; + + if (test_bit(QLC_BC_VF_STATE, &vf_info->state)) { + netdev_err(netdev, + "MAC address change failed for VF %d, as VF driver is loaded. Please unload VF driver and retry the operation\n", + vf); + return -EOPNOTSUPP; + } + + memcpy(curr_mac, mac, netdev->addr_len); + netdev_info(netdev, "MAC Address %pM is configured for VF %d\n", + mac, vf); + return 0; +} + +int qlcnic_sriov_set_vf_tx_rate(struct net_device *netdev, int vf, int tx_rate) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + struct qlcnic_sriov *sriov = adapter->ahw->sriov; + struct qlcnic_vf_info *vf_info; + struct qlcnic_info nic_info; + struct qlcnic_vport *vp; + u16 vpid; + + if (!qlcnic_sriov_pf_check(adapter)) + return -EOPNOTSUPP; + + if (vf >= sriov->num_vfs) + return -EINVAL; + + if (tx_rate >= 10000 || tx_rate < 100) { + netdev_err(netdev, + "Invalid Tx rate, allowed range is [%d - %d]", + QLC_VF_MIN_TX_RATE, QLC_VF_MAX_TX_RATE); + return -EINVAL; + } + + if (tx_rate == 0) + tx_rate = 10000; + + vf_info = &sriov->vf_info[vf]; + vp = vf_info->vp; + vpid = vp->handle; + + if (test_bit(QLC_BC_VF_STATE, &vf_info->state)) { + if (qlcnic_sriov_get_vf_vport_info(adapter, &nic_info, vpid)) + return -EIO; + + nic_info.max_tx_bw = tx_rate / 100; + nic_info.bit_offsets = BIT_0; + + if (qlcnic_sriov_pf_set_vport_info(adapter, &nic_info, vpid)) + return -EIO; + } + + vp->max_tx_bw = tx_rate / 100; + netdev_info(netdev, + "Setting Tx rate %d (Mbps), %d %% of PF bandwidth, for VF %d\n", + tx_rate, vp->max_tx_bw, vf); + return 0; +} + +int qlcnic_sriov_get_vf_config(struct net_device *netdev, + int vf, struct ifla_vf_info *ivi) +{ + struct qlcnic_adapter *adapter = netdev_priv(netdev); + struct qlcnic_sriov *sriov = adapter->ahw->sriov; + struct qlcnic_vport *vp; + + if (!qlcnic_sriov_pf_check(adapter)) + return -EOPNOTSUPP; + + if (vf >= sriov->num_vfs) + return -EINVAL; + + vp = sriov->vf_info[vf].vp; + memcpy(&ivi->mac, vp->mac, ETH_ALEN); + if (vp->max_tx_bw == MAX_BW) + ivi->tx_rate = 0; + else + ivi->tx_rate = vp->max_tx_bw * 100; + + ivi->vf = vf; + return 0; +}