From: Anson Huang Date: Tue, 20 Nov 2018 01:35:34 +0000 (+0000) Subject: ARM: dts: imx7d-sdb: add rev-a board support X-Git-Tag: v5.15~7280^2~3^2~56 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=3f343ec3eabcded338b62c04eadc8173955ec64e;p=platform%2Fkernel%2Flinux-starfive.git ARM: dts: imx7d-sdb: add rev-a board support Current imx7d-sdb.dts has some incorrect settings about Rev-A and Rev-B boards, some of the settings are based on Rev-A board but some are based on Rev-B board, clean up it by adding i.MX7D SDB Rev-A board support, make default imx7d-sdb.dts for Rev-B board as usual, and introduce imx7d-sdb-reva.dts for Rev-A board. Below are the affected differences of Rev-A and Rev-B board: Rev-A Rev-B USB_OTG2_PWR: UART3_CTS_B GPIO1_IO07 ENET_EN_B: None GPIO1_IO04 TP_INT_B: EPDC_DATA13 EPDC_BDR1 Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index db95cf7..fbdabfb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -574,6 +574,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-pico-pi.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ + imx7d-sdb-reva.dtb \ imx7d-sdb-sht11.dtb \ imx7s-colibri-eval-v3.dtb \ imx7s-warp.dtb diff --git a/arch/arm/boot/dts/imx7d-sdb-reva.dts b/arch/arm/boot/dts/imx7d-sdb-reva.dts new file mode 100644 index 0000000..7ce9d8c --- /dev/null +++ b/arch/arm/boot/dts/imx7d-sdb-reva.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright (C) 2015 Freescale Semiconductor, Inc. + +/dts-v1/; + +#include "imx7d-sdb.dts" + +/ { + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + }; +}; + +&fec2 { + /delete-property/phy-supply; +}; + +&iomuxc { + imx7d-sdb { + pinctrl_tsc2046_pendown: tsc2046_pendown { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x59 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + >; + }; + + pinctrl_usb_otg2_vbus_reg_reva: usbotg2vbusregrevagrp { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index b1b613b..202922e 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -72,9 +72,11 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg2_vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg>; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -115,6 +117,16 @@ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>; }; + reg_fec2_3v3: regulator-fec2-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec2-3v3"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000 0>; @@ -211,6 +223,7 @@ assigned-clock-rates = <0>, <100000000>; phy-mode = "rgmii"; phy-handle = <ðphy1>; + phy-supply = <®_fec2_3v3>; fsl,magic-packet; status = "okay"; }; @@ -492,6 +505,12 @@ >; }; + pinctrl_enet2_reg: enet2reggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x14 + >; + }; + pinctrl_flexcan2: flexcan2grp { fsl,pins = < MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 @@ -514,7 +533,6 @@ pinctrl_hog: hoggrp { fsl,pins = < - MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ >; }; @@ -736,4 +754,10 @@ MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x30 >; }; + + pinctrl_usb_otg2_vbus_reg: usbotg2vbusreggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x14 + >; + }; };