From: Andrew Lunn Date: Tue, 7 Jul 2020 01:49:33 +0000 (+0200) Subject: net: phy: at803x: Avoid comparison is always false warning X-Git-Tag: v5.10.7~1943^2~319^2~6 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=3f2edd309ff02c973bc3cb815c87def07a1ac804;p=platform%2Fkernel%2Flinux-rpi.git net: phy: at803x: Avoid comparison is always false warning By placing the GENMASK value into an unsigned int and then passing it to PREF_FIELD, the type is reduces down from ULL. Given the reduced size of the type, the range checks in PREP_FAIL() are always true, and -Wtype-limits then gives a warning. By skipping the intermediate variable, the warning can be avoided. Reviewed-by: Jakub Kicinski Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 97cbe593f0ea..96c61aa75bd7 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -400,8 +400,8 @@ static int at803x_parse_dt(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; struct at803x_priv *priv = phydev->priv; - unsigned int sel, mask; u32 freq, strength; + unsigned int sel; int ret; if (!IS_ENABLED(CONFIG_OF_MDIO)) @@ -409,7 +409,6 @@ static int at803x_parse_dt(struct phy_device *phydev) ret = of_property_read_u32(node, "qca,clk-out-frequency", &freq); if (!ret) { - mask = AT803X_CLK_OUT_MASK; switch (freq) { case 25000000: sel = AT803X_CLK_OUT_25MHZ_XTAL; @@ -428,8 +427,8 @@ static int at803x_parse_dt(struct phy_device *phydev) return -EINVAL; } - priv->clk_25m_reg |= FIELD_PREP(mask, sel); - priv->clk_25m_mask |= mask; + priv->clk_25m_reg |= FIELD_PREP(AT803X_CLK_OUT_MASK, sel); + priv->clk_25m_mask |= AT803X_CLK_OUT_MASK; /* Fixup for the AR8030/AR8035. This chip has another mask and * doesn't support the DSP reference. Eg. the lowest bit of the