From: Chris Packham Date: Tue, 29 Mar 2022 22:05:44 +0000 (+1300) Subject: dt-bindings: mmc: xenon: Convert to JSON schema X-Git-Tag: v6.6.17~7488^2~44 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=3ddfa03d8162264b32b95b26eccb902ed4e07f3f;p=platform%2Fkernel%2Flinux-rpi.git dt-bindings: mmc: xenon: Convert to JSON schema Convert the marvell,xenon-sdhci binding to JSON schema. Currently the in-tree dts files don't validate because they use sdhci@ instead of mmc@ as required by the generic mmc-controller schema. The compatible "marvell,sdhci-xenon" was not documented in the old binding but it accompanies the of "marvell,armada-3700-sdhci" in the armada-37xx SoC dtsi so this combination is added to the new binding document. Signed-off-by: Chris Packham Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220329220544.2132135-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Ulf Hansson --- diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt deleted file mode 100644 index c51a62d..0000000 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt +++ /dev/null @@ -1,173 +0,0 @@ -Marvell Xenon SDHCI Controller device tree bindings -This file documents differences between the core mmc properties -described by mmc.txt and the properties used by the Xenon implementation. - -Multiple SDHCs might be put into a single Xenon IP, to save size and cost. -Each SDHC is independent and owns independent resources, such as register sets, -clock and PHY. -Each SDHC should have an independent device tree node. - -Required Properties: -- compatible: should be one of the following - - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC. - Must provide a second register area and marvell,pad-type. - - "marvell,armada-ap806-sdhci": For controllers on Armada AP806. - - "marvell,armada-ap807-sdhci": For controllers on Armada AP807. - - "marvell,armada-cp110-sdhci": For controllers on Armada CP110. - -- clocks: - Array of clocks required for SDHC. - Require at least input clock for Xenon IP core. For Armada AP806 and - CP110, the AXI clock is also mandatory. - -- clock-names: - Array of names corresponding to clocks property. - The input clock for Xenon IP core should be named as "core". - The input clock for the AXI bus must be named as "axi". - -- reg: - * For "marvell,armada-3700-sdhci", two register areas. - The first one for Xenon IP register. The second one for the Armada 3700 SoC - PHY PAD Voltage Control register. - Please follow the examples with compatible "marvell,armada-3700-sdhci" - in below. - Please also check property marvell,pad-type in below. - - * For other compatible strings, one register area for Xenon IP. - -Optional Properties: -- marvell,xenon-sdhc-id: - Indicate the corresponding bit index of current SDHC in - SDHC System Operation Control Register Bit[7:0]. - Set/clear the corresponding bit to enable/disable current SDHC. - If Xenon IP contains only one SDHC, this property is optional. - -- marvell,xenon-phy-type: - Xenon support multiple types of PHYs. - To select eMMC 5.1 PHY, set: - marvell,xenon-phy-type = "emmc 5.1 phy" - eMMC 5.1 PHY is the default choice if this property is not provided. - To select eMMC 5.0 PHY, set: - marvell,xenon-phy-type = "emmc 5.0 phy" - - All those types of PHYs can support eMMC, SD and SDIO. - Please note that this property only presents the type of PHY. - It doesn't stand for the entire SDHC type or property. - For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only - supports eMMC 5.1. - -- marvell,xenon-phy-znr: - Set PHY ZNR value. - Only available for eMMC PHY. - Valid range = [0:0x1F]. - ZNR is set as 0xF by default if this property is not provided. - -- marvell,xenon-phy-zpr: - Set PHY ZPR value. - Only available for eMMC PHY. - Valid range = [0:0x1F]. - ZPR is set as 0xF by default if this property is not provided. - -- marvell,xenon-phy-nr-success-tun: - Set the number of required consecutive successful sampling points - used to identify a valid sampling window, in tuning process. - Valid range = [1:7]. - Set as 0x4 by default if this property is not provided. - -- marvell,xenon-phy-tun-step-divider: - Set the divider for calculating TUN_STEP. - Set as 64 by default if this property is not provided. - -- marvell,xenon-phy-slow-mode: - If this property is selected, transfers will bypass PHY. - Only available when bus frequency lower than 55MHz in SDR mode. - Disabled by default. Please only try this property if timing issues - always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25, - SD Default Speed and HS mode and eMMC legacy speed mode. - -- marvell,xenon-tun-count: - Xenon SDHC SoC usually doesn't provide re-tuning counter in - Capabilities Register 3 Bit[11:8]. - This property provides the re-tuning counter. - If this property is not set, default re-tuning counter will - be set as 0x9 in driver. - -- marvell,pad-type: - Type of Armada 3700 SoC PHY PAD Voltage Controller register. - Only valid when "marvell,armada-3700-sdhci" is selected. - Two types: "sd" and "fixed-1-8v". - If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning and is - switched to 1.8V when later in higher speed mode. - If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC. - Please follow the examples with compatible "marvell,armada-3700-sdhci" - in below. - -Example: -- For eMMC: - - sdhci@aa0000 { - compatible = "marvell,armada-ap806-sdhci"; - reg = <0xaa0000 0x1000>; - interrupts = - clocks = <&emmc_clk>,<&axi_clk>; - clock-names = "core", "axi"; - bus-width = <4>; - marvell,xenon-phy-slow-mode; - marvell,xenon-tun-count = <11>; - non-removable; - no-sd; - no-sdio; - - /* Vmmc and Vqmmc are both fixed */ - }; - -- For SD/SDIO: - - sdhci@ab0000 { - compatible = "marvell,armada-cp110-sdhci"; - reg = <0xab0000 0x1000>; - interrupts = - vqmmc-supply = <&sd_vqmmc_regulator>; - vmmc-supply = <&sd_vmmc_regulator>; - clocks = <&sdclk>, <&axi_clk>; - clock-names = "core", "axi"; - bus-width = <4>; - marvell,xenon-tun-count = <9>; - }; - -- For eMMC with compatible "marvell,armada-3700-sdhci": - - sdhci@aa0000 { - compatible = "marvell,armada-3700-sdhci"; - reg = <0xaa0000 0x1000>, - ; - interrupts = - clocks = <&emmcclk>; - clock-names = "core"; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - non-removable; - no-sd; - no-sdio; - - /* Vmmc and Vqmmc are both fixed */ - - marvell,pad-type = "fixed-1-8v"; - }; - -- For SD/SDIO with compatible "marvell,armada-3700-sdhci": - - sdhci@ab0000 { - compatible = "marvell,armada-3700-sdhci"; - reg = <0xab0000 0x1000>, - ; - interrupts = - vqmmc-supply = <&sd_regulator>; - /* Vmmc is fixed */ - clocks = <&sdclk>; - clock-names = "core"; - bus-width = <4>; - - marvell,pad-type = "sd"; - }; diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml new file mode 100644 index 0000000..c79639e --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml @@ -0,0 +1,275 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Xenon SDHCI Controller + +description: | + This file documents differences between the core MMC properties described by + mmc-controller.yaml and the properties used by the Xenon implementation. + + Multiple SDHCs might be put into a single Xenon IP, to save size and cost. + Each SDHC is independent and owns independent resources, such as register + sets, clock and PHY. + + Each SDHC should have an independent device tree node. + +maintainers: + - Ulf Hansson + +properties: + compatible: + oneOf: + - enum: + - marvell,armada-cp110-sdhci + - marvell,armada-ap806-sdhci + + - items: + - const: marvell,armada-ap807-sdhci + - const: marvell,armada-ap806-sdhci + + - items: + - const: marvell,armada-3700-sdhci + - const: marvell,sdhci-xenon + + reg: + minItems: 1 + maxItems: 2 + description: | + For "marvell,armada-3700-sdhci", two register areas. The first one + for Xenon IP register. The second one for the Armada 3700 SoC PHY PAD + Voltage Control register. Please follow the examples with compatible + "marvell,armada-3700-sdhci" in below. + Please also check property marvell,pad-type in below. + + For other compatible strings, one register area for Xenon IP. + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: axi + + marvell,xenon-sdhc-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + description: | + Indicate the corresponding bit index of current SDHC in SDHC System + Operation Control Register Bit[7:0]. Set/clear the corresponding bit to + enable/disable current SDHC. + + marvell,xenon-phy-type: + $ref: /schemas/types.yaml#/definitions/string + enum: + - "emmc 5.1 phy" + - "emmc 5.0 phy" + description: | + Xenon support multiple types of PHYs. To select eMMC 5.1 PHY, set: + marvell,xenon-phy-type = "emmc 5.1 phy" eMMC 5.1 PHY is the default + choice if this property is not provided. To select eMMC 5.0 PHY, set: + marvell,xenon-phy-type = "emmc 5.0 phy" + + All those types of PHYs can support eMMC, SD and SDIO. Please note that + this property only presents the type of PHY. It doesn't stand for the + entire SDHC type or property. For example, "emmc 5.1 phy" doesn't mean + that this Xenon SDHC only supports eMMC 5.1. + + marvell,xenon-phy-znr: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x1f + default: 0xf + description: | + Set PHY ZNR value. + Only available for eMMC PHY. + + marvell,xenon-phy-zpr: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x1f + default: 0xf + description: | + Set PHY ZPR value. + Only available for eMMC PHY. + + marvell,xenon-phy-nr-success-tun: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + default: 0x4 + description: | + Set the number of required consecutive successful sampling points + used to identify a valid sampling window, in tuning process. + + marvell,xenon-phy-tun-step-divider: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 64 + description: | + Set the divider for calculating TUN_STEP. + + marvell,xenon-phy-slow-mode: + type: boolean + description: | + If this property is selected, transfers will bypass PHY. + Only available when bus frequency lower than 55MHz in SDR mode. + Disabled by default. Please only try this property if timing issues + always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25, + SD Default Speed and HS mode and eMMC legacy speed mode. + + marvell,xenon-tun-count: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x9 + description: | + Xenon SDHC SoC usually doesn't provide re-tuning counter in + Capabilities Register 3 Bit[11:8]. + This property provides the re-tuning counter. + +allOf: + - $ref: mmc-controller.yaml# + - if: + properties: + compatible: + contains: + const: marvell,armada-3700-sdhci + + then: + properties: + reg: + items: + - description: Xenon IP registers + - description: Armada 3700 SoC PHY PAD Voltage Control register + minItems: 2 + + marvell,pad-type: + $ref: /schemas/types.yaml#/definitions/string + enum: + - sd + - fixed-1-8v + description: | + Type of Armada 3700 SoC PHY PAD Voltage Controller register. + If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning + and is switched to 1.8V when later in higher speed mode. + If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for + eMMC. + Please follow the examples with compatible + "marvell,armada-3700-sdhci" in below. + + required: + - marvell,pad-type + + - if: + properties: + compatible: + contains: + enum: + - marvell,armada-cp110-sdhci + - marvell,armada-ap807-sdhci + - marvell,armada-ap806-sdhci + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: core + - const: axi + + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + // For eMMC + #include + #include + + mmc@aa0000 { + compatible = "marvell,armada-ap807-sdhci", "marvell,armada-ap806-sdhci"; + reg = <0xaa0000 0x1000>; + interrupts = ; + clocks = <&emmc_clk 0>, <&axi_clk 0>; + clock-names = "core", "axi"; + bus-width = <4>; + marvell,xenon-phy-slow-mode; + marvell,xenon-tun-count = <11>; + non-removable; + no-sd; + no-sdio; + + /* Vmmc and Vqmmc are both fixed */ + }; + + - | + // For SD/SDIO + #include + #include + + mmc@ab0000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0xab0000 0x1000>; + interrupts = ; + vqmmc-supply = <&sd_vqmmc_regulator>; + vmmc-supply = <&sd_vmmc_regulator>; + clocks = <&sdclk 0>, <&axi_clk 0>; + clock-names = "core", "axi"; + bus-width = <4>; + marvell,xenon-tun-count = <9>; + }; + + - | + // For eMMC with compatible "marvell,armada-3700-sdhci": + #include + #include + + mmc@aa0000 { + compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; + reg = <0xaa0000 0x1000>, + <0x17808 0x4>; + interrupts = ; + clocks = <&emmcclk 0>; + clock-names = "core"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + + /* Vmmc and Vqmmc are both fixed */ + + marvell,pad-type = "fixed-1-8v"; + }; + + - | + // For SD/SDIO with compatible "marvell,armada-3700-sdhci": + #include + #include + + mmc@ab0000 { + compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; + reg = <0xab0000 0x1000>, + <0x17808 0x4>; + interrupts = ; + vqmmc-supply = <&sd_regulator>; + /* Vmmc is fixed */ + clocks = <&sdclk 0>; + clock-names = "core"; + bus-width = <4>; + + marvell,pad-type = "sd"; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 5e8c2f6..d5168b9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11827,7 +11827,7 @@ MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER M: Hu Ziji L: linux-mmc@vger.kernel.org S: Supported -F: Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt +F: Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml F: drivers/mmc/host/sdhci-xenon* MATROX FRAMEBUFFER DRIVER