From: Hans de Goede Date: Sun, 25 Feb 2018 10:46:53 +0000 (+0100) Subject: ASoC: rt5651: Only configure LDO voltage once at boot X-Git-Tag: v4.19~773^2~32^2~31^3~15 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=3d7719d3cc8efe88be4c72cb7cbb0d866ed7d1b2;p=platform%2Fkernel%2Flinux-rpi3.git ASoC: rt5651: Only configure LDO voltage once at boot Now that rt5651_set_bias_level(BIAS_OFF) no longer modifies the LDO voltage selection bits, there is no need to set them each time we move to standby. Instead configure them once at component-probe() time. Signed-off-by: Hans de Goede Signed-off-by: Mark Brown --- diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c index 74f83af..9460bdc 100644 --- a/sound/soc/codecs/rt5651.c +++ b/sound/soc/codecs/rt5651.c @@ -1540,9 +1540,6 @@ static int rt5651_set_bias_level(struct snd_soc_component *component, snd_soc_component_update_bits(component, RT5651_PWR_ANLG1, RT5651_PWR_FV1 | RT5651_PWR_FV2, RT5651_PWR_FV1 | RT5651_PWR_FV2); - snd_soc_component_update_bits(component, RT5651_PWR_ANLG1, - RT5651_PWR_LDO_DVO_MASK, - RT5651_PWR_LDO_DVO_1_2V); snd_soc_component_update_bits(component, RT5651_D_MISC, 0x1, 0x1); } break; @@ -1662,6 +1659,9 @@ static int rt5651_probe(struct snd_soc_component *component) rt5651->component = component; + snd_soc_component_update_bits(component, RT5651_PWR_ANLG1, + RT5651_PWR_LDO_DVO_MASK, RT5651_PWR_LDO_DVO_1_2V); + snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF); rt5651_apply_properties(component);