From: Fabio Estevam Date: Thu, 26 Dec 2013 16:51:33 +0000 (-0200) Subject: mx6: soc: Introduce set_ldo_voltage() X-Git-Tag: v2014.04~100^2~9 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=3d622b78bdd6832f6fa8599aaf31de541bf04ea8;p=platform%2Fkernel%2Fu-boot.git mx6: soc: Introduce set_ldo_voltage() Introduce set_ldo_voltage() so that all three LDO regulators can be configured. Signed-off-by: Fabio Estevam --- diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 3e095aa..d8ccf3a 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -19,6 +19,12 @@ #include #include +enum ldo_reg { + LDO_ARM, + LDO_SOC, + LDO_PU, +}; + struct scu_regs { u32 ctrl; u32 config; @@ -115,10 +121,11 @@ static void clear_ldo_ramp(void) * Possible values are from 0.725V to 1.450V in steps of * 0.025V (25mV). */ -static void set_vddsoc(u32 mv) +static int set_ldo_voltage(enum ldo_reg ldo, u32 mv) { struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; u32 val, reg = readl(&anatop->reg_core); + u8 shift; if (mv < 725) val = 0x00; /* Power gated off */ @@ -129,12 +136,24 @@ static void set_vddsoc(u32 mv) clear_ldo_ramp(); - /* - * Mask out the REG_CORE[22:18] bits (REG2_TRIG) - * and set them to the calculated value (0.7V + val * 0.25V) - */ - reg = (reg & ~(0x1F << 18)) | (val << 18); + switch (ldo) { + case LDO_SOC: + shift = 18; + break; + case LDO_PU: + shift = 9; + break; + case LDO_ARM: + shift = 0; + break; + default: + return -EINVAL; + } + + reg = (reg & ~(0x1F << shift)) | (val << shift); writel(reg, &anatop->reg_core); + + return 0; } static void imx_set_wdog_powerdown(bool enable) @@ -151,7 +170,7 @@ int arch_cpu_init(void) { init_aips(); - set_vddsoc(1175); /* Set VDDSOC to 1.175V */ + set_ldo_voltage(LDO_SOC, 1175); /* Set VDDSOC to 1.175V */ imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */