From: Fabio Estevam Date: Wed, 27 Jun 2018 00:34:22 +0000 (-0300) Subject: ARM: dts: imx53-qsb: Let the codec control MCLK pinctrl X-Git-Tag: v5.15~8134^2~19^2~65 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=3d177f483e2bc1852e119f9f9a58b7d7d65ef18d;p=platform%2Fkernel%2Flinux-starfive.git ARM: dts: imx53-qsb: Let the codec control MCLK pinctrl The hog pinctrl hog is meant for pins that do not have an associated driver. The MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK pin is the one that provides the MCLK signal to the SGTL5000 codec, so a better represenation is to move it under the codec node. While at it, change the pinctrl value from 0x80000000 to the POR reset value of register IOMUXC_SW_PAD_CTL_PAD_GPIO_0. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index ef7658a..7423d46 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -153,7 +153,6 @@ imx53-qsb { pinctrl_hog: hoggrp { fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 MX53_PAD_GPIO_8__GPIO1_8 0x80000000 MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 @@ -180,6 +179,12 @@ >; }; + pinctrl_codec: codecgrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 @@ -310,6 +315,8 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec>; #sound-dai-cells = <0>; VDDA-supply = <®_3p2v>; VDDIO-supply = <®_3p2v>;