From: Dinh Nguyen Date: Wed, 1 Oct 2014 10:44:48 +0000 (-0500) Subject: arm: socfpga: fix fetching cpu1start_addr for SMP X-Git-Tag: v4.9.8~5337^2~17^2~3 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=3a4356c0c042a5f340c8d6ee1a4feaa1c8e51ea2;p=platform%2Fkernel%2Flinux-rpi3.git arm: socfpga: fix fetching cpu1start_addr for SMP When CPU1 is brought out of reset, it's MMU is not turned on yet, so it will only be able to use physical addresses. For systems with that have the MMU page configured for 0xC0000000, 0x80000000, or 0x40000000 "BIC 0x40000000" will work just fine, as it was just converting the virtual address of &cpu1start_addr into a physical address, ie. 0xC0000000 became 0x80000000. So for systems where the SDRAM controller was able to do a wrap-around access, this was working fine, as it was just dropping the MSB, but for systems where out of bounds memory access is not allowed, this would not allow CPU1 to correctly fetch &cpu1start_addr. This patch fixes the secondary_trampoline code to correctly fetch the physical address of cpu1start_addr directly. The patch will subtract the correct PAGE_OFFSET from &cpu1start_addr. And since on this platform, the physical memory will always start at 0x0, subtracting PAGE_OFFSET from &cpu1start_addr will allow CPU1 to correctly fetch the value of cpu1start_addr. While at it, change the name of cpu1start_addr to socfpga_cpu1start_addr to avoid any future naming collisions for multiplatform image. Signed-off-by: Dinh Nguyen --- v4: Updated commit log to correctly lay out the usage of PAGE_OFFSET and add comments to the same effect. v3: Used PAGE_OFFSET to get the physical address v2: Correctly get the physical address instead of just a BIC hack. --- diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 572b8f7..60c443d 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -40,7 +40,7 @@ extern void __iomem *rst_manager_base_addr; extern struct smp_operations socfpga_smp_ops; extern char secondary_trampoline, secondary_trampoline_end; -extern unsigned long cpu1start_addr; +extern unsigned long socfpga_cpu1start_addr; #define SOCFPGA_SCU_VIRT_BASE 0xfffec000 diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S index 95c115d..f65ea0a 100644 --- a/arch/arm/mach-socfpga/headsmp.S +++ b/arch/arm/mach-socfpga/headsmp.S @@ -9,21 +9,26 @@ */ #include #include +#include .arch armv7-a ENTRY(secondary_trampoline) - movw r2, #:lower16:cpu1start_addr - movt r2, #:upper16:cpu1start_addr - - /* The socfpga VT cannot handle a 0xC0000000 page offset when loading - the cpu1start_addr, we bit clear it. Tested on HW and VT. */ - bic r2, r2, #0x40000000 - - ldr r0, [r2] - ldr r1, [r0] - bx r1 + /* CPU1 will always fetch from 0x0 when it is brought out of reset. + * Thus, we can just subtract the PAGE_OFFSET to get the physical + * address of &cpu1start_addr. This would not work for platforms + * where the physical memory does not start at 0x0. + */ + adr r0, 1f + ldmia r0, {r1, r2} + sub r2, r2, #PAGE_OFFSET + ldr r3, [r2] + ldr r4, [r3] + bx r4 + .align +1: .long . + .long socfpga_cpu1start_addr ENTRY(secondary_trampoline_end) ENTRY(socfpga_secondary_startup) diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 5356a72..16ca97b 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -33,11 +33,11 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) { int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; - if (cpu1start_addr) { + if (socfpga_cpu1start_addr) { memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); __raw_writel(virt_to_phys(socfpga_secondary_startup), - (sys_manager_base_addr + (cpu1start_addr & 0x000000ff))); + (sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff))); flush_cache_all(); smp_wmb(); diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index adbf383..383d61e 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -29,7 +29,7 @@ void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE)); void __iomem *sys_manager_base_addr; void __iomem *rst_manager_base_addr; -unsigned long cpu1start_addr; +unsigned long socfpga_cpu1start_addr; static struct map_desc scu_io_desc __initdata = { .virtual = SOCFPGA_SCU_VIRT_BASE, @@ -70,7 +70,7 @@ void __init socfpga_sysmgr_init(void) np = of_find_compatible_node(NULL, NULL, "altr,sys-mgr"); if (of_property_read_u32(np, "cpu1-start-addr", - (u32 *) &cpu1start_addr)) + (u32 *) &socfpga_cpu1start_addr)) pr_err("SMP: Need cpu1-start-addr in device tree.\n"); sys_manager_base_addr = of_iomap(np, 0);