From: Claudiu Beznea Date: Wed, 22 Jul 2020 07:38:13 +0000 (+0300) Subject: clk: at91: sam9x60-pll: check fcore against ranges X-Git-Tag: v5.10.7~1858^2^5~13 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=390227dca870cd0b8b0961da9e293551015c0007;p=platform%2Fkernel%2Flinux-rpi.git clk: at91: sam9x60-pll: check fcore against ranges According to datasheet the range of 600-1200MHz is for the frequency generated by the fractional part of the PLL (namely Fcorepllck according to datasheet). With this in mind the output range of the PLL itself (fractional + div), taking into account that the divider is 8 bits wide, is 600/256-1200Hz=2.3-1200MHz. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/1595403506-8209-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd --- diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c index 4b7b6c4..a933abe 100644 --- a/drivers/clk/at91/clk-sam9x60-pll.c +++ b/drivers/clk/at91/clk-sam9x60-pll.c @@ -21,6 +21,9 @@ #define UPLL_DIV 2 #define PLL_MUL_MAX (FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, UINT_MAX) + 1) +#define FCORE_MIN (600000000) +#define FCORE_MAX (1200000000) + #define PLL_MAX_ID 1 struct sam9x60_pll { @@ -168,6 +171,7 @@ static long sam9x60_pll_get_best_div_mul(struct sam9x60_pll *pll, unsigned long bestdiv = 0; unsigned long bestmul = 0; unsigned long bestfrac = 0; + u64 fcore = 0; if (rate < characteristics->output[0].min || rate > characteristics->output[0].max) @@ -212,6 +216,11 @@ static long sam9x60_pll_get_best_div_mul(struct sam9x60_pll *pll, remainder = rate - tmprate; } + fcore = parent_rate * (tmpmul + 1) + + ((u64)parent_rate * tmpfrac >> 22); + if (fcore < FCORE_MIN || fcore > FCORE_MAX) + continue; + /* * Compare the remainder with the best remainder found until * now and elect a new best multiplier/divider pair if the @@ -231,7 +240,8 @@ static long sam9x60_pll_get_best_div_mul(struct sam9x60_pll *pll, } /* Check if bestrate is a valid output rate */ - if (bestrate < characteristics->output[0].min || + if (fcore < FCORE_MIN || fcore > FCORE_MAX || + bestrate < characteristics->output[0].min || bestrate > characteristics->output[0].max) return -ERANGE; diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c index 2b4c674..1994513 100644 --- a/drivers/clk/at91/sam9x60.c +++ b/drivers/clk/at91/sam9x60.c @@ -22,7 +22,7 @@ static const struct clk_master_layout sam9x60_master_layout = { }; static const struct clk_range plla_outputs[] = { - { .min = 300000000, .max = 600000000 }, + { .min = 2343750, .max = 1200000000 }, }; static const struct clk_pll_characteristics plla_characteristics = {