From: Arend van Spriel Date: Wed, 2 Mar 2016 19:37:18 +0000 (+0100) Subject: nl80211: add feature for BSS selection support X-Git-Tag: v4.7-rc1~154^2~326^2~38 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=38de03d2a28925b489c11546804e2f5418cc17a4;p=platform%2Fkernel%2Flinux-exynos.git nl80211: add feature for BSS selection support Introducing a new feature that the driver can use to indicate the driver/firmware supports configuration of BSS selection criteria upon CONNECT command. This can be useful when multiple BSS-es are found belonging to the same ESS, ie. Infra-BSS with same SSID. The criteria can then be used to offload selection of a preferred BSS. Reviewed-by: Hante Meuleman Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Lei Zhang Signed-off-by: Arend van Spriel [move wiphy support check into parse_bss_select()] Signed-off-by: Johannes Berg --- diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 14c0c43..0bbfbf3 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1859,6 +1859,33 @@ struct cfg80211_ibss_params { }; /** + * struct cfg80211_bss_select_adjust - BSS selection with RSSI adjustment. + * + * @band: band of BSS which should match for RSSI level adjustment. + * @delta: value of RSSI level adjustment. + */ +struct cfg80211_bss_select_adjust { + enum ieee80211_band band; + s8 delta; +}; + +/** + * struct cfg80211_bss_selection - connection parameters for BSS selection. + * + * @behaviour: requested BSS selection behaviour. + * @param: parameters for requestion behaviour. + * @band_pref: preferred band for %NL80211_BSS_SELECT_ATTR_BAND_PREF. + * @adjust: parameters for %NL80211_BSS_SELECT_ATTR_RSSI_ADJUST. + */ +struct cfg80211_bss_selection { + enum nl80211_bss_select_attr behaviour; + union { + enum ieee80211_band band_pref; + struct cfg80211_bss_select_adjust adjust; + } param; +}; + +/** * struct cfg80211_connect_params - Connection parameters * * This structure provides information needed to complete IEEE 802.11 @@ -1895,6 +1922,7 @@ struct cfg80211_ibss_params { * @vht_capa_mask: The bits of vht_capa which are to be used. * @pbss: if set, connect to a PCP instead of AP. Valid for DMG * networks. + * @bss_select: criteria to be used for BSS selection. */ struct cfg80211_connect_params { struct ieee80211_channel *channel; @@ -1918,6 +1946,7 @@ struct cfg80211_connect_params { struct ieee80211_vht_cap vht_capa; struct ieee80211_vht_cap vht_capa_mask; bool pbss; + struct cfg80211_bss_selection bss_select; }; /** @@ -3186,6 +3215,9 @@ struct wiphy_vendor_command { * low rssi when a frame is heard on different channel, then it should set * this variable to the maximal offset for which it can compensate. * This value should be set in MHz. + * @bss_select_support: bitmask indicating the BSS selection criteria supported + * by the driver in the .connect() callback. The bit position maps to the + * attribute indices defined in &enum nl80211_bss_select_attr. */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -3308,6 +3340,8 @@ struct wiphy { u8 max_num_csa_counters; u8 max_adj_channel_rssi_comp; + u32 bss_select_support; + char priv[0] __aligned(NETDEV_ALIGN); }; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 23bf066..b2a8d8c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1797,6 +1797,12 @@ enum nl80211_commands { * in a PBSS. Specified in %NL80211_CMD_CONNECT to request * connecting to a PCP, and in %NL80211_CMD_START_AP to start * a PCP instead of AP. Relevant for DMG networks only. + * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the + * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains + * attributes according &enum nl80211_bss_select_attr to indicate what + * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT + * it contains the behaviour-specific attribute containing the parameters for + * BSS selection to be done by driver and/or firmware. * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined @@ -2174,6 +2180,8 @@ enum nl80211_attrs { NL80211_ATTR_PBSS, + NL80211_ATTR_BSS_SELECT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -4667,4 +4675,48 @@ enum nl80211_sched_scan_plan { __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 }; +/** + * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters. + * + * @band: band of BSS that must match for RSSI value adjustment. + * @delta: value used to adjust the RSSI value of matching BSS. + */ +struct nl80211_bss_select_rssi_adjust { + __u8 band; + __s8 delta; +} __attribute__((packed)); + +/** + * enum nl80211_bss_select_attr - attributes for bss selection. + * + * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved. + * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection + * is requested. + * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS + * selection should be done such that the specified band is preferred. + * When there are multiple BSS-es in the preferred band, the driver + * shall use RSSI-based BSS selection as a second step. The value of + * this attribute is according to &enum nl80211_band (u32). + * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for + * BSS-es in the specified band is to be adjusted before doing + * RSSI-based BSS selection. The attribute value is a packed structure + * value as specified by &struct nl80211_bss_select_rssi_adjust. + * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number. + * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use. + * + * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT + * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour + * which the driver shall use. + */ +enum nl80211_bss_select_attr { + __NL80211_BSS_SELECT_ATTR_INVALID, + NL80211_BSS_SELECT_ATTR_RSSI, + NL80211_BSS_SELECT_ATTR_BAND_PREF, + NL80211_BSS_SELECT_ATTR_RSSI_ADJUST, + + /* keep last */ + __NL80211_BSS_SELECT_ATTR_AFTER_LAST, + NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 +}; + #endif /* __LINUX_NL80211_H */ diff --git a/net/wireless/core.c b/net/wireless/core.c index 9f1c4aa..5327e4b 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -626,6 +626,13 @@ int wiphy_register(struct wiphy *wiphy) !rdev->ops->set_mac_acl))) return -EINVAL; + /* assure only valid behaviours are flagged by driver + * hence subtract 2 as bit 0 is invalid. + */ + if (WARN_ON(wiphy->bss_select_support && + (wiphy->bss_select_support & ~(BIT(__NL80211_BSS_SELECT_ATTR_AFTER_LAST) - 2)))) + return -EINVAL; + if (wiphy->addresses) memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 1b43f78..d6c6449 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -402,6 +402,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = { [NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 }, [NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG }, [NL80211_ATTR_PBSS] = { .type = NLA_FLAG }, + [NL80211_ATTR_BSS_SELECT] = { .type = NLA_NESTED }, }; /* policy for the key attributes */ @@ -486,6 +487,15 @@ nl80211_plan_policy[NL80211_SCHED_SCAN_PLAN_MAX + 1] = { [NL80211_SCHED_SCAN_PLAN_ITERATIONS] = { .type = NLA_U32 }, }; +static const struct nla_policy +nl80211_bss_select_policy[NL80211_BSS_SELECT_ATTR_MAX + 1] = { + [NL80211_BSS_SELECT_ATTR_RSSI] = { .type = NLA_FLAG }, + [NL80211_BSS_SELECT_ATTR_BAND_PREF] = { .type = NLA_U32 }, + [NL80211_BSS_SELECT_ATTR_RSSI_ADJUST] = { + .len = sizeof(struct nl80211_bss_select_rssi_adjust) + }, +}; + static int nl80211_prepare_wdev_dump(struct sk_buff *skb, struct netlink_callback *cb, struct cfg80211_registered_device **rdev, @@ -1731,6 +1741,25 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev, rdev->wiphy.ext_features)) goto nla_put_failure; + if (rdev->wiphy.bss_select_support) { + struct nlattr *nested; + u32 bss_select_support = rdev->wiphy.bss_select_support; + + nested = nla_nest_start(msg, NL80211_ATTR_BSS_SELECT); + if (!nested) + goto nla_put_failure; + + i = 0; + while (bss_select_support) { + if ((bss_select_support & 1) && + nla_put_flag(msg, i)) + goto nla_put_failure; + i++; + bss_select_support >>= 1; + } + nla_nest_end(msg, nested); + } + /* done */ state->split_start = 0; break; @@ -5758,6 +5787,73 @@ static int validate_scan_freqs(struct nlattr *freqs) return n_channels; } +static bool is_band_valid(struct wiphy *wiphy, enum ieee80211_band b) +{ + return b < IEEE80211_NUM_BANDS && wiphy->bands[b]; +} + +static int parse_bss_select(struct nlattr *nla, struct wiphy *wiphy, + struct cfg80211_bss_selection *bss_select) +{ + struct nlattr *attr[NL80211_BSS_SELECT_ATTR_MAX + 1]; + struct nlattr *nest; + int err; + bool found = false; + int i; + + /* only process one nested attribute */ + nest = nla_data(nla); + if (!nla_ok(nest, nla_len(nest))) + return -EINVAL; + + err = nla_parse(attr, NL80211_BSS_SELECT_ATTR_MAX, nla_data(nest), + nla_len(nest), nl80211_bss_select_policy); + if (err) + return err; + + /* only one attribute may be given */ + for (i = 0; i <= NL80211_BSS_SELECT_ATTR_MAX; i++) { + if (attr[i]) { + if (found) + return -EINVAL; + found = true; + } + } + + bss_select->behaviour = __NL80211_BSS_SELECT_ATTR_INVALID; + + if (attr[NL80211_BSS_SELECT_ATTR_RSSI]) + bss_select->behaviour = NL80211_BSS_SELECT_ATTR_RSSI; + + if (attr[NL80211_BSS_SELECT_ATTR_BAND_PREF]) { + bss_select->behaviour = NL80211_BSS_SELECT_ATTR_BAND_PREF; + bss_select->param.band_pref = + nla_get_u32(attr[NL80211_BSS_SELECT_ATTR_BAND_PREF]); + if (!is_band_valid(wiphy, bss_select->param.band_pref)) + return -EINVAL; + } + + if (attr[NL80211_BSS_SELECT_ATTR_RSSI_ADJUST]) { + struct nl80211_bss_select_rssi_adjust *adj_param; + + adj_param = nla_data(attr[NL80211_BSS_SELECT_ATTR_RSSI_ADJUST]); + bss_select->behaviour = NL80211_BSS_SELECT_ATTR_RSSI_ADJUST; + bss_select->param.adjust.band = adj_param->band; + bss_select->param.adjust.delta = adj_param->delta; + if (!is_band_valid(wiphy, bss_select->param.adjust.band)) + return -EINVAL; + } + + /* user-space did not provide behaviour attribute */ + if (bss_select->behaviour == __NL80211_BSS_SELECT_ATTR_INVALID) + return -EINVAL; + + if (!(wiphy->bss_select_support & BIT(bss_select->behaviour))) + return -EINVAL; + + return 0; +} + static int nl80211_parse_random_mac(struct nlattr **attrs, u8 *mac_addr, u8 *mac_addr_mask) { @@ -8001,6 +8097,21 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info) return -EOPNOTSUPP; } + if (info->attrs[NL80211_ATTR_BSS_SELECT]) { + /* bss selection makes no sense if bssid is set */ + if (connect.bssid) { + kzfree(connkeys); + return -EINVAL; + } + + err = parse_bss_select(info->attrs[NL80211_ATTR_BSS_SELECT], + wiphy, &connect.bss_select); + if (err) { + kzfree(connkeys); + return err; + } + } + wdev_lock(dev->ieee80211_ptr); err = cfg80211_connect(rdev, dev, &connect, connkeys, NULL); wdev_unlock(dev->ieee80211_ptr);