From: Paul Gortmaker Date: Tue, 20 Jun 2023 04:32:59 +0000 (-0400) Subject: powerpc: drop MPC8540_ADS and MPC8560_ADS platform support X-Git-Tag: v6.6.7~2494^2~23 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=384e338a9187e479349c97c9cfb36f6060708db8;p=platform%2Fkernel%2Flinux-starfive.git powerpc: drop MPC8540_ADS and MPC8560_ADS platform support Based on the revision history in the manual(s), these e500-v1 platforms were first available around 2002. Like a lot of evaluation boards, they attempted to provide break-out connectors for all possible features, and that combined with four PCI-X slots (and the age/era) meant for a considerably large board. As I recall it, from a Linux point of view, the biggest difference between 8540 and 8560 was in the UART implementation, and that is reflected in a diff of the defconfigs. In any case, these are over 20 years old, and by today's standards only have a small amount of DDR1 memory, and were not widely available. Given that, it makes sense to remove support from them in 2023. Signed-off-by: Paul Gortmaker Signed-off-by: Michael Ellerman Link: https://msgid.link/20230620043300.197546-2-paul.gortmaker@windriver.com --- diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index bf89765..cf728cb 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -342,8 +342,6 @@ image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot # Board ports in arch/powerpc/platform/85xx/Kconfig -image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads -image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ cuImage.mpc8548cds_32b \ cuImage.mpc8555cds diff --git a/arch/powerpc/boot/dts/fsl/mpc8540ads.dts b/arch/powerpc/boot/dts/fsl/mpc8540ads.dts deleted file mode 100644 index e03ae13..0000000 --- a/arch/powerpc/boot/dts/fsl/mpc8540ads.dts +++ /dev/null @@ -1,355 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8540 ADS Device Tree Source - * - * Copyright 2006, 2008 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/include/ "e500v1_power_isa.dtsi" - -/ { - model = "MPC8540ADS"; - compatible = "MPC8540ADS", "MPC85xxADS"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8540@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; // 33 MHz, from uboot - bus-frequency = <0>; // 166 MHz - clock-frequency = <0>; // 825 MHz, from uboot - next-level-cache = <&L2>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x8000000>; // 128M at 0x0 - }; - - soc8540@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <0>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <8>; - }; - - ecm@1000 { - compatible = "fsl,mpc8540-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8540-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8540-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2, 256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8540-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8540-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8540-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8540-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <7 1>; - reg = <0x3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "FEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <41 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi2>; - phy-handle = <&phy3>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - }; - - pci0: pci@e0008000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x02 */ - 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 - - /* IDSEL 0x03 */ - 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 - 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x04 */ - 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x05 */ - 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x0c */ - 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 - - /* IDSEL 0x0d */ - 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 - 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x0e */ - 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x0f */ - 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x12 */ - 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 - - /* IDSEL 0x13 */ - 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 - 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x14 */ - 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; - }; -}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8560ads.dts b/arch/powerpc/boot/dts/fsl/mpc8560ads.dts deleted file mode 100644 index c2f9aea..0000000 --- a/arch/powerpc/boot/dts/fsl/mpc8560ads.dts +++ /dev/null @@ -1,388 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC8560 ADS Device Tree Source - * - * Copyright 2006, 2008 Freescale Semiconductor Inc. - */ - -/dts-v1/; - -/include/ "e500v1_power_isa.dtsi" - -/ { - model = "MPC8560ADS"; - compatible = "MPC8560ADS", "MPC85xxADS"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8560@0 { - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; // 32 bytes - i-cache-line-size = <32>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <82500000>; - bus-frequency = <330000000>; - clock-frequency = <825000000>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - soc8560@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0xe0000000 0x100000>; - bus-frequency = <330000000>; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <8>; - }; - - ecm@1000 { - compatible = "fsl,mpc8560-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8540-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8540-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <32>; // 32 bytes - cache-size = <0x40000>; // L2, 256K - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8560-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8560-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8560-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8560-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <5 1>; - reg = <0x1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <7 1>; - reg = <0x2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <7 1>; - reg = <0x3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - cpm@919c0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; - reg = <0x919c0 0x30>; - ranges; - - muram@80000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80000 0x10000>; - - data@0 { - compatible = "fsl,cpm-muram-data"; - reg = <0x0 0x4000 0x9000 0x2000>; - }; - }; - - brg@919f0 { - compatible = "fsl,mpc8560-brg", - "fsl,cpm2-brg", - "fsl,cpm-brg"; - reg = <0x919f0 0x10 0x915f0 0x10>; - clock-frequency = <165000000>; - }; - - cpmpic: pic@90c00 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - interrupts = <46 2>; - interrupt-parent = <&mpic>; - reg = <0x90c00 0x80>; - compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; - }; - - serial0: serial@91a00 { - device_type = "serial"; - compatible = "fsl,mpc8560-scc-uart", - "fsl,cpm2-scc-uart"; - reg = <0x91a00 0x20 0x88000 0x100>; - fsl,cpm-brg = <1>; - fsl,cpm-command = <0x800000>; - current-speed = <115200>; - interrupts = <40 8>; - interrupt-parent = <&cpmpic>; - }; - - serial1: serial@91a20 { - device_type = "serial"; - compatible = "fsl,mpc8560-scc-uart", - "fsl,cpm2-scc-uart"; - reg = <0x91a20 0x20 0x88100 0x100>; - fsl,cpm-brg = <2>; - fsl,cpm-command = <0x4a00000>; - current-speed = <115200>; - interrupts = <41 8>; - interrupt-parent = <&cpmpic>; - }; - - enet2: ethernet@91320 { - device_type = "network"; - compatible = "fsl,mpc8560-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - fsl,cpm-command = <0x16200300>; - interrupts = <33 8>; - interrupt-parent = <&cpmpic>; - phy-handle = <&phy2>; - }; - - enet3: ethernet@91340 { - device_type = "network"; - compatible = "fsl,mpc8560-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - fsl,cpm-command = <0x1a400300>; - interrupts = <34 8>; - interrupt-parent = <&cpmpic>; - phy-handle = <&phy3>; - }; - }; - }; - - pci0: pci@e0008000 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; - reg = <0xe0008000 0x1000>; - clock-frequency = <66666666>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x2 */ - 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 - - /* IDSEL 0x3 */ - 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 - 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 0x4 */ - 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 0x5 */ - 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 12 */ - 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 - - /* IDSEL 13 */ - 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 - 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 14*/ - 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 15 */ - 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 18 */ - 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 - 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 - 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 - 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 - - /* IDSEL 19 */ - 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 - 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 - - /* IDSEL 20 */ - 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 - 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 - 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 - 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 - - /* IDSEL 21 */ - 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <24 2>; - bus-range = <0 0>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>; - }; -}; diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig deleted file mode 100644 index 618e03e..0000000 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_PPC_85xx=y -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -# CONFIG_MSDOS_PARTITION is not set -CONFIG_MPC8540_ADS=y -CONFIG_GEN_RTC=y -CONFIG_BINFMT_MISC=y -CONFIG_MATH_EMULATION=y -# CONFIG_SECCOMP is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_SYN_COOKIES=y -# CONFIG_IPV6 is not set -# CONFIG_FW_LOADER is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_NETDEVICES=y -CONFIG_GIANFAR=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_EXT2_FS=y -CONFIG_EXT4_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEBUG_MUTEXES=y diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig deleted file mode 100644 index 9bc6283..0000000 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ /dev/null @@ -1,50 +0,0 @@ -CONFIG_PPC_85xx=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -# CONFIG_MSDOS_PARTITION is not set -CONFIG_MPC8560_ADS=y -CONFIG_GEN_RTC=y -CONFIG_BINFMT_MISC=y -CONFIG_MATH_EMULATION=y -# CONFIG_SECCOMP is not set -CONFIG_PCI=y -CONFIG_PCI_DEBUG=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_SYN_COOKIES=y -# CONFIG_IPV6 is not set -# CONFIG_FW_LOADER is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_NETDEVICES=y -CONFIG_FS_ENET=y -# CONFIG_FS_ENET_HAS_SCC is not set -CONFIG_GIANFAR=y -CONFIG_E1000=y -CONFIG_DAVICOM_PHY=y -CONFIG_MARVELL_PHY=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_EXT2_FS=y -CONFIG_EXT4_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEBUG_MUTEXES=y diff --git a/arch/powerpc/configs/mpc85xx_base.config b/arch/powerpc/configs/mpc85xx_base.config index 85907b7..e13bcf8 100644 --- a/arch/powerpc/configs/mpc85xx_base.config +++ b/arch/powerpc/configs/mpc85xx_base.config @@ -1,7 +1,5 @@ CONFIG_MATH_EMULATION=y CONFIG_MPC8536_DS=y -CONFIG_MPC8540_ADS=y -CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_MDS=y diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index e3d9776..4bb473ca 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -12,8 +12,6 @@ obj-y += common.o obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o obj-$(CONFIG_C293_PCIE) += c293pcie.o -obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o -obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o obj8259-$(CONFIG_PPC_I8259) += mpc85xx_8259.o diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c deleted file mode 100644 index 7c67438..0000000 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ /dev/null @@ -1,162 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * MPC85xx setup and early boot code plus other random bits. - * - * Maintained by Kumar Gala (see MAINTAINERS for contact information) - * - * Copyright 2005 Freescale Semiconductor Inc. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include - -#ifdef CONFIG_CPM2 -#include -#include -#endif - -#include "mpc85xx.h" - -static void __init mpc85xx_ads_pic_init(void) -{ - struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, - 0, 256, " OpenPIC "); - BUG_ON(mpic == NULL); - mpic_init(mpic); - - mpc85xx_cpm2_pic_init(); -} - -/* - * Setup the architecture - */ -#ifdef CONFIG_CPM2 -struct cpm_pin { - int port, pin, flags; -}; - -static const struct cpm_pin mpc8560_ads_pins[] = { - /* SCC1 */ - {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, - {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - - /* SCC2 */ - {2, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {2, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - - /* FCC2 */ - {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, - {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */ - {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */ - - /* FCC3 */ - {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, - {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, - {2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK16 */ - {2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK15 */ - {2, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, -}; - -static void __init init_ioports(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) { - const struct cpm_pin *pin = &mpc8560_ads_pins[i]; - cpm2_set_pin(pin->port, pin->pin, pin->flags); - } - - cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); - cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); - cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX); - cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX); - cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX); -} -#endif - -static void __init mpc85xx_ads_setup_arch(void) -{ - if (ppc_md.progress) - ppc_md.progress("mpc85xx_ads_setup_arch()", 0); - -#ifdef CONFIG_CPM2 - cpm2_reset(); - init_ioports(); -#endif - - fsl_pci_assign_primary(); -} - -static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); -} - -machine_arch_initcall(mpc85xx_ads, mpc85xx_common_publish_devices); - -define_machine(mpc85xx_ads) { - .name = "MPC85xx ADS", - .compatible = "MPC85xxADS", - .setup_arch = mpc85xx_ads_setup_arch, - .init_IRQ = mpc85xx_ads_pic_init, - .show_cpuinfo = mpc85xx_ads_show_cpuinfo, - .get_irq = mpic_get_irq, - .progress = udbg_progress, -};