From: Michal Simek Date: Thu, 6 Feb 2020 14:59:23 +0000 (+0100) Subject: net: phy: dp83867: Clean force link good bit X-Git-Tag: v2020.10~347^2~4 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=380376520f726ee7544c2fcd3c114187f01a6f27;p=platform%2Fkernel%2Fu-boot.git net: phy: dp83867: Clean force link good bit On Xilinx ZynqMP revA board initial value of PHYCR register is 0x5448 which means FORCE_LINK_GOOD is already setup. Origin code was doing write but the new code is doing read/modify/write and keep this bit untouched. That's why ethernet stop to work. The patch is cleaning this bit when PHYCR value is composed. Tested on Xilinx zcu102-revA and zcu104-rev1.0 boards. Fixes: 37d6265f2bfa ("net: phy: dp83867: refactor rgmii configuration") Signed-off-by: Michal Simek Reviewed-by: Grygorii Strashko --- diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 08935d9..0098997 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -65,6 +65,7 @@ #define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14 #define DP83867_PHYCR_FIFO_DEPTH_MASK GENMASK(15, 14) #define DP83867_PHYCR_RESERVED_MASK BIT(11) +#define DP83867_PHYCR_FORCE_LINK_GOOD BIT(10) #define DP83867_MDI_CROSSOVER 5 #define DP83867_MDI_CROSSOVER_MDIX 2 #define DP83867_PHYCTRL_SGMIIEN 0x0800 @@ -284,6 +285,9 @@ static int dp83867_config(struct phy_device *phydev) val &= ~DP83867_PHYCR_FIFO_DEPTH_MASK; val |= (dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT); + /* Do not force link good */ + val &= ~DP83867_PHYCR_FORCE_LINK_GOOD; + /* The code below checks if "port mirroring" N/A MODE4 has been * enabled during power on bootstrap. *