From: Ansuel Smith Date: Mon, 22 Nov 2021 15:23:43 +0000 (+0100) Subject: net: dsa: qca8k: move regmap init in probe and set it mandatory X-Git-Tag: v6.1-rc5~2306^2~370^2~5 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=36b8af12f424e7a7f60a935c60a0fd4aa0822378;p=platform%2Fkernel%2Flinux-starfive.git net: dsa: qca8k: move regmap init in probe and set it mandatory In preparation for regmap conversion, move regmap init in the probe function and make it mandatory as any read/write/rmw operation will be converted to regmap API. Signed-off-by: Ansuel Smith Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller --- diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index ae02043..f63a432 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -1086,12 +1086,6 @@ qca8k_setup(struct dsa_switch *ds) if (ret) return ret; - /* Start by setting up the register mapping */ - priv->regmap = devm_regmap_init(ds->dev, NULL, priv, - &qca8k_regmap_config); - if (IS_ERR(priv->regmap)) - dev_warn(priv->dev, "regmap initialization failed"); - ret = qca8k_setup_mdio_bus(priv); if (ret) return ret; @@ -2073,6 +2067,14 @@ qca8k_sw_probe(struct mdio_device *mdiodev) gpiod_set_value_cansleep(priv->reset_gpio, 0); } + /* Start by setting up the register mapping */ + priv->regmap = devm_regmap_init(&mdiodev->dev, NULL, priv, + &qca8k_regmap_config); + if (IS_ERR(priv->regmap)) { + dev_err(priv->dev, "regmap initialization failed"); + return PTR_ERR(priv->regmap); + } + /* Check the detected switch id */ ret = qca8k_read_switch_id(priv); if (ret)