From: Eli Sennesh Date: Tue, 22 Dec 2015 22:26:57 +0000 (-0500) Subject: greybus: firmware and svc: detect the difference between ES2 and ES3 chips X-Git-Tag: v5.15~12752^2~378^2~21^2~898 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=3563ff88e65e544f09569195b07841dd48d60e57;p=platform%2Fkernel%2Flinux-starfive.git greybus: firmware and svc: detect the difference between ES2 and ES3 chips The Greybus SVC code needs to read and clear the module boot status upon hotplug; this requires reading two different attributes depending on whether we're running on ES2 or ES3. On Marti Bolivar's (mbolivar@leaflabs.com) advice, we detect ES2 using the unique ES2_DDBL1_MFR_ID and ES2_DDBL1_PROD_ID for ES2 hardware, and treat all other chips as ES3 appropriately. This patch detects the difference and adds the appropriate definitions for ES3 hardware. Signed-off-by: Eli Sennesh Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/greybus/firmware.c b/drivers/staging/greybus/firmware.c index 5ec3efd..c65f294 100644 --- a/drivers/staging/greybus/firmware.c +++ b/drivers/staging/greybus/firmware.c @@ -11,9 +11,6 @@ #include "greybus.h" -#define ES2_DDBL1_MFR_ID 0x00000126 -#define ES2_DDBL1_PROD_ID 0x00001000 - struct gb_firmware { struct gb_connection *connection; const struct firmware *fw; diff --git a/drivers/staging/greybus/greybus_protocols.h b/drivers/staging/greybus/greybus_protocols.h index 76416b5a..53c1dea 100644 --- a/drivers/staging/greybus/greybus_protocols.h +++ b/drivers/staging/greybus/greybus_protocols.h @@ -160,6 +160,10 @@ struct gb_control_disconnected_request { #define GB_FIRMWARE_TYPE_AP_READY 0x05 /* Request with no-payload */ #define GB_FIRMWARE_TYPE_GET_VID_PID 0x06 /* Request with no-payload */ +/* FIXME: remove all ES2-specific identifiers from the kernel */ +#define ES2_DDBL1_MFR_ID 0x00000126 +#define ES2_DDBL1_PROD_ID 0x00001000 + /* Greybus firmware boot stages */ #define GB_FIRMWARE_BOOT_STAGE_ONE 0x01 /* Reserved for the boot ROM */ #define GB_FIRMWARE_BOOT_STAGE_TWO 0x02 /* Firmware package to be loaded by the boot ROM */ @@ -823,14 +827,16 @@ struct gb_svc_link_config_request { /* Attributes for peer get/set operations */ #define DME_ATTR_SELECTOR_INDEX 0 +/* FIXME: remove ES2 support and DME_ATTR_T_TST_SRC_INCREMENT */ #define DME_ATTR_T_TST_SRC_INCREMENT 0x4083 - -/* Return value from TST_SRC_INCREMENT */ -#define DME_TSI_SPI_BOOT_STARTED 0x02 -#define DME_TSI_TRUSTED_SPI_BOOT_FINISHED 0x03 -#define DME_TSI_UNTRUSTED_SPI_BOOT_FINISHED 0x04 -#define DME_TSI_UNIPRO_BOOT_STARTED 0x06 -#define DME_TSI_FALLBACK_UNIPRO_BOOT_STARTED 0x09 +#define DME_ATTR_ES3_INIT_STATUS 0x6101 + +/* Return value from init-status attributes listed above */ +#define DME_DIS_SPI_BOOT_STARTED 0x02 +#define DME_DIS_TRUSTED_SPI_BOOT_FINISHED 0x03 +#define DME_DIS_UNTRUSTED_SPI_BOOT_FINISHED 0x04 +#define DME_DIS_UNIPRO_BOOT_STARTED 0x06 +#define DME_DIS_FALLBACK_UNIPRO_BOOT_STARTED 0x09 struct gb_svc_route_create_request { __u8 intf1_id; diff --git a/drivers/staging/greybus/svc.c b/drivers/staging/greybus/svc.c index 864051b..3e760e6 100644 --- a/drivers/staging/greybus/svc.c +++ b/drivers/staging/greybus/svc.c @@ -139,8 +139,8 @@ EXPORT_SYMBOL_GPL(gb_svc_dme_peer_set); /* * T_TstSrcIncrement is written by the module on ES2 as a stand-in for boot - * status attribute. AP needs to read and clear it, after reading a non-zero - * value from it. + * status attribute ES3_INIT_STATUS. AP needs to read and clear it, after + * reading a non-zero value from it. * * FIXME: This is module-hardware dependent and needs to be extended for every * type of module we want to support. @@ -150,10 +150,22 @@ static int gb_svc_read_and_clear_module_boot_status(struct gb_interface *intf) struct gb_host_device *hd = intf->hd; int ret; u32 value; + u16 attr; + u8 init_status; - /* Read and clear boot status in T_TstSrcIncrement */ - ret = gb_svc_dme_peer_get(hd->svc, intf->interface_id, - DME_ATTR_T_TST_SRC_INCREMENT, + /* + * Check if the module is ES2 or ES3, and choose attr number + * appropriately. + * FIXME: Remove ES2 support from the kernel entirely. + */ + if (intf->ddbl1_manufacturer_id == ES2_DDBL1_MFR_ID && + intf->ddbl1_product_id == ES2_DDBL1_PROD_ID) + attr = DME_ATTR_T_TST_SRC_INCREMENT; + else + attr = DME_ATTR_ES3_INIT_STATUS; + + /* Read and clear boot status in ES3_INIT_STATUS */ + ret = gb_svc_dme_peer_get(hd->svc, intf->interface_id, attr, DME_ATTR_SELECTOR_INDEX, &value); if (ret) @@ -169,19 +181,22 @@ static int gb_svc_read_and_clear_module_boot_status(struct gb_interface *intf) } /* - * Check if the module needs to boot from unipro. + * Check if the module needs to boot from UniPro. * For ES2: We need to check lowest 8 bits of 'value'. * For ES3: We need to check highest 8 bits out of 32 of 'value'. - * - * FIXME: Add code to find if we are on ES2 or ES3 to have separate - * checks. + * FIXME: Remove ES2 support from the kernel entirely. */ - if (value == DME_TSI_UNIPRO_BOOT_STARTED || - value == DME_TSI_FALLBACK_UNIPRO_BOOT_STARTED) + if (intf->ddbl1_manufacturer_id == ES2_DDBL1_MFR_ID && + intf->ddbl1_product_id == ES2_DDBL1_PROD_ID) + init_status = value; + else + init_status = value >> 24; + + if (init_status == DME_DIS_UNIPRO_BOOT_STARTED || + init_status == DME_DIS_FALLBACK_UNIPRO_BOOT_STARTED) intf->boot_over_unipro = true; - return gb_svc_dme_peer_set(hd->svc, intf->interface_id, - DME_ATTR_T_TST_SRC_INCREMENT, + return gb_svc_dme_peer_set(hd->svc, intf->interface_id, attr, DME_ATTR_SELECTOR_INDEX, 0); }