From: Antti Palosaari Date: Thu, 4 Aug 2011 23:21:16 +0000 (-0300) Subject: [media] rtl28xx: reimplement I2C adapter X-Git-Tag: v3.5-rc5~26^2~718 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=34ec2933485b6b047245ccbb7fa2b3513bed46af;p=platform%2Fkernel%2Flinux-3.10.git [media] rtl28xx: reimplement I2C adapter It is almost perfect now! Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.c b/drivers/media/dvb/dvb-usb/rtl28xxu.c index 8772fe8..a6b5c04 100644 --- a/drivers/media/dvb/dvb-usb/rtl28xxu.c +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.c @@ -134,11 +134,29 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], { int ret; struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct rtl28xxu_priv *priv = d->priv; struct rtl28xxu_req req; /* * It is not known which are real I2C bus xfer limits, but testing * with RTL2831U + MT2060 gives max RD 24 and max WR 22 bytes. + * TODO: find out RTL2832U lens + */ + + /* + * I2C adapter logic looks rather complicated due to fact it handles + * three different access methods. Those methods are; + * 1) integrated demod access + * 2) old I2C access + * 3) new I2C access + * + * Used method is selected in order 1, 2, 3. Method 3 can handle all + * requests but there is two reasons why not use it always; + * 1) It is most expensive, usually two USB messages are needed + * 2) At least RTL2831U does not support it + * + * Method 3 is needed in case of I2C write+read (typical register read) + * where write is more than one byte. */ if (mutex_lock_interruptible(&d->i2c_mutex) < 0) @@ -146,44 +164,73 @@ static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], if (num == 2 && !(msg[0].flags & I2C_M_RD) && (msg[1].flags & I2C_M_RD)) { - if (msg[0].len > 2 || msg[1].len > 24) { + if (msg[0].len > 24 || msg[1].len > 24) { + /* TODO: check msg[0].len max */ ret = -EOPNOTSUPP; goto err_unlock; - } - if (msg[0].addr == 0x10) { - /* integrated demod */ - req.value = (msg[0].buf[1] << 8) | (msg[0].addr << 1); - req.index = CMD_DEMOD_RD | msg[0].buf[0]; + } else if (msg[0].addr == 0x10) { + /* method 1 - integrated demod */ + req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); + req.index = CMD_DEMOD_RD | priv->page; req.size = msg[1].len; req.data = &msg[1].buf[0]; ret = rtl28xxu_ctrl_msg(d, &req); - } else { - /* real I2C */ + } else if (msg[0].len < 2) { + /* method 2 - old I2C */ req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); req.index = CMD_I2C_RD; req.size = msg[1].len; req.data = &msg[1].buf[0]; ret = rtl28xxu_ctrl_msg(d, &req); + } else { + /* method 3 - new I2C */ + req.value = (msg[0].addr << 1); + req.index = CMD_I2C_DA_WR; + req.size = msg[0].len; + req.data = msg[0].buf; + ret = rtl28xxu_ctrl_msg(d, &req); + if (ret) + goto err_unlock; + + req.value = (msg[0].addr << 1); + req.index = CMD_I2C_DA_RD; + req.size = msg[1].len; + req.data = msg[1].buf; + ret = rtl28xxu_ctrl_msg(d, &req); } } else if (num == 1 && !(msg[0].flags & I2C_M_RD)) { if (msg[0].len > 22) { + /* TODO: check msg[0].len max */ ret = -EOPNOTSUPP; goto err_unlock; - } - if (msg[0].addr == 0x10) { - /* integrated demod */ - req.value = (msg[0].buf[1] << 8) | (msg[0].addr << 1); - req.index = CMD_DEMOD_WR | msg[0].buf[0]; - req.size = msg[0].len-2; - req.data = &msg[0].buf[2]; - ret = rtl28xxu_ctrl_msg(d, &req); - } else { - /* real I2C */ + } else if (msg[0].addr == 0x10) { + /* method 1 - integrated demod */ + if (msg[0].buf[0] == 0x00) { + /* save demod page for later demod access */ + priv->page = msg[0].buf[1]; + ret = 0; + } else { + req.value = (msg[0].buf[0] << 8) | + (msg[0].addr << 1); + req.index = CMD_DEMOD_WR | priv->page; + req.size = msg[0].len-1; + req.data = &msg[0].buf[1]; + ret = rtl28xxu_ctrl_msg(d, &req); + } + } else if (msg[0].len < 23) { + /* method 2 - old I2C */ req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1); req.index = CMD_I2C_WR; req.size = msg[0].len-1; req.data = &msg[0].buf[1]; ret = rtl28xxu_ctrl_msg(d, &req); + } else { + /* method 3 - new I2C */ + req.value = (msg[0].addr << 1); + req.index = CMD_I2C_DA_WR; + req.size = msg[0].len; + req.data = msg[0].buf; + ret = rtl28xxu_ctrl_msg(d, &req); } } else { ret = -EINVAL; diff --git a/drivers/media/dvb/dvb-usb/rtl28xxu.h b/drivers/media/dvb/dvb-usb/rtl28xxu.h index dbde378..2047b1b 100644 --- a/drivers/media/dvb/dvb-usb/rtl28xxu.h +++ b/drivers/media/dvb/dvb-usb/rtl28xxu.h @@ -49,25 +49,30 @@ * USB commands * (usb_control_msg() index parameter) */ -#define DEMOD (0x00 << 8) -#define USB (0x01 << 8) -#define SYS (0x02 << 8) -#define I2C (0x03 << 8) +#define DEMOD (0x00 << 8) +#define USB (0x01 << 8) +#define SYS (0x02 << 8) +#define I2C (0x03 << 8) +#define I2C_DA (0x06 << 8) + #define CMD_WR_FLAG 0x10 #define CMD_DEMOD_RD (DEMOD) #define CMD_DEMOD_WR (DEMOD | CMD_WR_FLAG) #define CMD_USB_RD (USB) #define CMD_USB_WR (USB | CMD_WR_FLAG) #define CMD_SYS_RD (SYS) +#define CMD_IR_RD (CMD_SYS_RD | 0x01) +#define CMD_IR_WR (CMD_SYS_WR | 0x01) #define CMD_SYS_WR (SYS | CMD_WR_FLAG) #define CMD_I2C_RD (I2C) #define CMD_I2C_WR (I2C | CMD_WR_FLAG) -#define CMD_IR_RD (CMD_SYS_RD | 0x01) -#define CMD_IR_WR (CMD_SYS_WR | 0x01) +#define CMD_I2C_DA_RD (I2C_DA) +#define CMD_I2C_DA_WR (I2C_DA | CMD_WR_FLAG) struct rtl28xxu_priv { u8 chip_id; u8 tuner; + u8 page; /* integrated demod active register page */ bool rc_active; };