From: Tim Gore Date: Tue, 5 Jul 2016 09:01:30 +0000 (+0100) Subject: drm/i915:gen9: implement WaMediaPoolStateCmdInWABB X-Git-Tag: v4.9.8~1110^2~42^2~228 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=3485d99e415fadedfeeeb92d12d61e11d143dd21;p=platform%2Fkernel%2Flinux-rpi3.git drm/i915:gen9: implement WaMediaPoolStateCmdInWABB This patch applies WaMediaPoolStateCmdInWABB which fixes a problem with the restoration of thread counts on resuming from RC6. References: HSD#2137167 Signed-off-by: Tim Gore Reviewed-by: Arun Siluvery Signed-off-by: Tvrtko Ursulin Link: http://patchwork.freedesktop.org/patch/msgid/1467709290-5941-1-git-send-email-tim.gore@intel.com --- diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index d47d1a0..70c6990 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -1296,6 +1296,31 @@ static int gen9_init_indirectctx_bb(struct intel_engine_cs *engine, wa_ctx_emit(batch, index, 0); wa_ctx_emit(batch, index, 0); } + + /* WaMediaPoolStateCmdInWABB:bxt */ + if (HAS_POOLED_EU(engine->i915)) { + /* + * EU pool configuration is setup along with golden context + * during context initialization. This value depends on + * device type (2x6 or 3x6) and needs to be updated based + * on which subslice is disabled especially for 2x6 + * devices, however it is safe to load default + * configuration of 3x6 device instead of masking off + * corresponding bits because HW ignores bits of a disabled + * subslice and drops down to appropriate config. Please + * see render_state_setup() in i915_gem_render_state.c for + * possible configurations, to avoid duplication they are + * not shown here again. + */ + u32 eu_pool_config = 0x00777000; + wa_ctx_emit(batch, index, GEN9_MEDIA_POOL_STATE); + wa_ctx_emit(batch, index, GEN9_MEDIA_POOL_ENABLE); + wa_ctx_emit(batch, index, eu_pool_config); + wa_ctx_emit(batch, index, 0); + wa_ctx_emit(batch, index, 0); + wa_ctx_emit(batch, index, 0); + } + /* Pad to end of cacheline */ while (index % CACHELINE_DWORDS) wa_ctx_emit(batch, index, MI_NOOP);