From: Florian Fainelli Date: Wed, 26 Nov 2014 02:08:49 +0000 (-0800) Subject: net: dsa: bcm_sf2: reset switch prior to initialization X-Git-Tag: v4.9.8~5304^2~5^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=33f846142919f0ecceb9fde99fecdbc307dbf541;p=platform%2Fkernel%2Flinux-rpi3.git net: dsa: bcm_sf2: reset switch prior to initialization Our boot agent may have left the switch in an certain configuration state, make sure we issue a software reset prior to configuring the switch in order to ensure the HW is in a consistent state, in particular transmit queues and internal buffers. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 46632e8..4f4c2a7 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -377,6 +377,29 @@ static irqreturn_t bcm_sf2_switch_1_isr(int irq, void *dev_id) return IRQ_HANDLED; } +static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv) +{ + unsigned int timeout = 1000; + u32 reg; + + reg = core_readl(priv, CORE_WATCHDOG_CTRL); + reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET; + core_writel(priv, reg, CORE_WATCHDOG_CTRL); + + do { + reg = core_readl(priv, CORE_WATCHDOG_CTRL); + if (!(reg & SOFTWARE_RESET)) + break; + + usleep_range(1000, 2000); + } while (timeout-- > 0); + + if (timeout == 0) + return -ETIMEDOUT; + + return 0; +} + static int bcm_sf2_sw_setup(struct dsa_switch *ds) { const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME; @@ -410,6 +433,12 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds) base++; } + ret = bcm_sf2_sw_rst(priv); + if (ret) { + pr_err("unable to software reset switch: %d\n", ret); + goto out_unmap; + } + /* Disable all interrupts and request them */ intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET); intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR); @@ -735,29 +764,6 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds) return 0; } -static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv) -{ - unsigned int timeout = 1000; - u32 reg; - - reg = core_readl(priv, CORE_WATCHDOG_CTRL); - reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET; - core_writel(priv, reg, CORE_WATCHDOG_CTRL); - - do { - reg = core_readl(priv, CORE_WATCHDOG_CTRL); - if (!(reg & SOFTWARE_RESET)) - break; - - usleep_range(1000, 2000); - } while (timeout-- > 0); - - if (timeout == 0) - return -ETIMEDOUT; - - return 0; -} - static int bcm_sf2_sw_resume(struct dsa_switch *ds) { struct bcm_sf2_priv *priv = ds_to_priv(ds);