From: Geert Uytterhoeven Date: Fri, 6 Mar 2020 09:00:46 +0000 (+0100) Subject: dt-bindings: serial: Convert slave-device bindings to json-schema X-Git-Tag: v5.15~4165^2~41 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=32ced09d79034a7e0e9139c007dcdabd9dd9f00c;p=platform%2Fkernel%2Flinux-starfive.git dt-bindings: serial: Convert slave-device bindings to json-schema Convert the serial slave-device Device Tree binding documentation to json-schema, and incorporate it into the generic serial bindings. Signed-off-by: Geert Uytterhoeven Reviewed-by: Matthias Brugger Signed-off-by: Rob Herring --- diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt index f547bd4..d6dc9c0 100644 --- a/Documentation/devicetree/bindings/gnss/gnss.txt +++ b/Documentation/devicetree/bindings/gnss/gnss.txt @@ -8,7 +8,7 @@ bus (e.g. UART, I2C or SPI). Please refer to the following documents for generic properties: - Documentation/devicetree/bindings/serial/slave-device.txt + Documentation/devicetree/bindings/serial/serial.yaml Documentation/devicetree/bindings/spi/spi-bus.txt Required properties: diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt index dd25867..a7d57ba 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt @@ -20,7 +20,7 @@ Required properties: Optional properties: - - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt + - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - shutdown-gpios: GPIO specifier, used to enable the BT module - device-wakeup-gpios: GPIO specifier, used to wakeup the controller - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor. diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt index 112011c..219bcbd 100644 --- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt @@ -42,7 +42,7 @@ child node of the serial node with UART. Please refer to the following documents for generic properties: - Documentation/devicetree/bindings/serial/slave-device.txt + Documentation/devicetree/bindings/serial/serial.yaml Required properties: diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt index 21c36e5..8f5ae0b 100644 --- a/Documentation/devicetree/bindings/net/qca,qca7000.txt +++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt @@ -68,7 +68,7 @@ Required properties: Optional properties: - local-mac-address : see ./ethernet.txt - current-speed : current baud rate of QCA7000 which defaults to 115200 - if absent, see also ../serial/slave-device.txt + if absent, see also ../serial/serial.yaml UART Example: diff --git a/Documentation/devicetree/bindings/net/ti-bluetooth.txt b/Documentation/devicetree/bindings/net/ti-bluetooth.txt index 6d03ff8..f48c17b 100644 --- a/Documentation/devicetree/bindings/net/ti-bluetooth.txt +++ b/Documentation/devicetree/bindings/net/ti-bluetooth.txt @@ -15,8 +15,7 @@ standard BT HCI protocol with additional channels for the other functions. TI WiLink devices also have a separate WiFi interface as described in wireless/ti,wlcore.txt. -This bindings follows the UART slave device binding in -../serial/slave-device.txt. +This bindings follows the UART slave device binding in ../serial/serial.yaml. Required properties: - compatible: should be one of the following: diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index ca2ae75..dd97ecd 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -7,6 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Serial Interface Generic DT Bindings maintainers: + - Rob Herring - Greg Kroah-Hartman description: @@ -69,3 +70,58 @@ then: properties: cts-gpios: false rts-gpios: false + +patternProperties: + ".*": + if: + type: object + then: + description: + Serial attached devices shall be a child node of the host UART device + the slave device is attached to. It is expected that the attached + device is the only child node of the UART device. The slave device node + name shall reflect the generic type of device for the node. + + properties: + compatible: + description: + Compatible of the device connected to the serial port. + + max-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The maximum baud rate the device operates at. + This should only be present if the maximum is less than the slave + device can support. For example, a particular board has some + signal quality issue or the host processor can't support higher + baud rates. + + current-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The current baud rate the device operates at. + This should only be present in case a driver has no chance to know + the baud rate of the slave device. + Examples: + * device supports auto-baud + * the rate is setup by a bootloader and there is no way to reset + the device + * device baud rate is configured by its firmware but there is no + way to request the actual settings + + required: + - compatible + +examples: + - | + serial@1234 { + compatible = "ns16550a"; + reg = <0x1234 0x20>; + interrupts = <1>; + + bluetooth { + compatible = "brcm,bcm43341-bt"; + interrupt-parent = <&gpio>; + interrupts = <10>; + }; + }; diff --git a/Documentation/devicetree/bindings/serial/slave-device.txt b/Documentation/devicetree/bindings/serial/slave-device.txt deleted file mode 100644 index 40110e0..0000000 --- a/Documentation/devicetree/bindings/serial/slave-device.txt +++ /dev/null @@ -1,45 +0,0 @@ -Serial Slave Device DT binding - -This documents the binding structure and common properties for serial -attached devices. Common examples include Bluetooth, WiFi, NFC and GPS -devices. - -Serial attached devices shall be a child node of the host UART device the -slave device is attached to. It is expected that the attached device is -the only child node of the UART device. The slave device node name shall -reflect the generic type of device for the node. - -Required Properties: - -- compatible : A string reflecting the vendor and specific device the node - represents. - -Optional Properties: - -- max-speed : The maximum baud rate the device operates at. This should - only be present if the maximum is less than the slave device - can support. For example, a particular board has some signal - quality issue or the host processor can't support higher - baud rates. -- current-speed : The current baud rate the device operates at. This should - only be present in case a driver has no chance to know - the baud rate of the slave device. - Examples: - * device supports auto-baud - * the rate is setup by a bootloader and there is no - way to reset the device - * device baud rate is configured by its firmware but - there is no way to request the actual settings - -Example: - -serial@1234 { - compatible = "ns16550a"; - interrupts = <1>; - - bluetooth { - compatible = "brcm,bcm43341-bt"; - interrupt-parent = <&gpio>; - interrupts = <10>; - }; -}; diff --git a/MAINTAINERS b/MAINTAINERS index b4cb364..16760fc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15001,7 +15001,7 @@ SERIAL DEVICE BUS M: Rob Herring L: linux-serial@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/serial/slave-device.txt +F: Documentation/devicetree/bindings/serial/serial.yaml F: drivers/tty/serdev/ F: include/linux/serdev.h