From: Joe Perches Date: Sat, 13 Apr 2013 19:03:17 +0000 (+0000) Subject: fec: Convert printks to netdev_ X-Git-Tag: v4.0~4125^2~139 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=31b7720c825934bca1c0f9f562b0c2dc25f7ae81;p=platform%2Fkernel%2Flinux-amlogic.git fec: Convert printks to netdev_ Use a more current logging message style. Convert the printks where a struct net_device is available to netdev_. Convert the other printks to pr_ and add pr_fmt where appropriate. Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 153437b..d7657a4 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -266,7 +266,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) /* Ooops. All transmit buffers are full. Bail out. * This should not happen, since ndev->tbusy should be set. */ - printk("%s: tx queue full!.\n", ndev->name); + netdev_err(ndev, "tx queue full!\n"); return NETDEV_TX_BUSY; } @@ -578,7 +578,7 @@ fec_stop(struct net_device *ndev) writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */ udelay(10); if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA)) - printk("fec_stop : Graceful transmit stop did not complete !\n"); + netdev_err(ndev, "Graceful transmit stop did not complete!\n"); } /* Whack a reset. We should wait for this. */ @@ -676,7 +676,7 @@ fec_enet_tx(struct net_device *ndev) } if (status & BD_ENET_TX_READY) - printk("HEY! Enet xmit interrupt and TX_READY.\n"); + netdev_err(ndev, "HEY! Enet xmit interrupt and TX_READY\n"); /* Deferred means some collisions occurred during transmit, * but we eventually sent the packet OK. @@ -744,7 +744,7 @@ fec_enet_rx(struct net_device *ndev, int budget) * the last indicator should be set. */ if ((status & BD_ENET_RX_LAST) == 0) - printk("FEC ENET: rcv is not +last\n"); + netdev_err(ndev, "rcv is not +last\n"); if (!fep->opened) goto rx_processing_done; @@ -1031,7 +1031,7 @@ static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum) usecs_to_jiffies(FEC_MII_TIMEOUT)); if (time_left == 0) { fep->mii_timeout = 1; - printk(KERN_ERR "FEC: MDIO read timeout\n"); + netdev_err(fep->netdev, "MDIO read timeout\n"); return -ETIMEDOUT; } @@ -1059,7 +1059,7 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum, usecs_to_jiffies(FEC_MII_TIMEOUT)); if (time_left == 0) { fep->mii_timeout = 1; - printk(KERN_ERR "FEC: MDIO write timeout\n"); + netdev_err(fep->netdev, "MDIO write timeout\n"); return -ETIMEDOUT; } @@ -1099,9 +1099,7 @@ static int fec_enet_mii_probe(struct net_device *ndev) } if (phy_id >= PHY_MAX_ADDR) { - printk(KERN_INFO - "%s: no PHY, assuming direct connection to switch\n", - ndev->name); + netdev_info(ndev, "no PHY, assuming direct connection to switch\n"); strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); phy_id = 0; } @@ -1110,7 +1108,7 @@ static int fec_enet_mii_probe(struct net_device *ndev) phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link, fep->phy_interface); if (IS_ERR(phy_dev)) { - printk(KERN_ERR "%s: could not attach to PHY\n", ndev->name); + netdev_err(ndev, "could not attach to PHY\n"); return PTR_ERR(phy_dev); } @@ -1128,11 +1126,9 @@ static int fec_enet_mii_probe(struct net_device *ndev) fep->link = 0; fep->full_duplex = 0; - printk(KERN_INFO - "%s: Freescale FEC PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", - ndev->name, - fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), - fep->phy_dev->irq); + netdev_info(ndev, "Freescale FEC PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", + fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), + fep->phy_dev->irq); return 0; } diff --git a/drivers/net/ethernet/freescale/fec_mpc52xx.c b/drivers/net/ethernet/freescale/fec_mpc52xx.c index 77943a6..9bc15e2 100644 --- a/drivers/net/ethernet/freescale/fec_mpc52xx.c +++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c @@ -14,6 +14,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include @@ -858,13 +860,11 @@ static int mpc52xx_fec_probe(struct platform_device *op) /* Reserve FEC control zone */ rv = of_address_to_resource(np, 0, &mem); if (rv) { - printk(KERN_ERR DRIVER_NAME ": " - "Error while parsing device node resource\n" ); + pr_err("Error while parsing device node resource\n"); goto err_netdev; } if (resource_size(&mem) < sizeof(struct mpc52xx_fec)) { - printk(KERN_ERR DRIVER_NAME - " - invalid resource size (%lx < %x), check mpc52xx_devices.c\n", + pr_err("invalid resource size (%lx < %x), check mpc52xx_devices.c\n", (unsigned long)resource_size(&mem), sizeof(struct mpc52xx_fec)); rv = -EINVAL; @@ -902,7 +902,7 @@ static int mpc52xx_fec_probe(struct platform_device *op) priv->tx_dmatsk = bcom_fec_tx_init(FEC_TX_NUM_BD, tx_fifo); if (!priv->rx_dmatsk || !priv->tx_dmatsk) { - printk(KERN_ERR DRIVER_NAME ": Can not init SDMA tasks\n" ); + pr_err("Can not init SDMA tasks\n"); rv = -ENOMEM; goto err_rx_tx_dmatsk; } @@ -982,8 +982,8 @@ static int mpc52xx_fec_probe(struct platform_device *op) /* We're done ! */ dev_set_drvdata(&op->dev, ndev); - printk(KERN_INFO "%s: %s MAC %pM\n", - ndev->name, op->dev.of_node->full_name, ndev->dev_addr); + netdev_info(ndev, "%s MAC %pM\n", + op->dev.of_node->full_name, ndev->dev_addr); return 0; @@ -1094,7 +1094,7 @@ mpc52xx_fec_init(void) int ret; ret = platform_driver_register(&mpc52xx_fec_mdio_driver); if (ret) { - printk(KERN_ERR DRIVER_NAME ": failed to register mdio driver\n"); + pr_err("failed to register mdio driver\n"); return ret; } #endif diff --git a/drivers/net/ethernet/freescale/fec_ptp.c b/drivers/net/ethernet/freescale/fec_ptp.c index e040c8b..25fc960 100644 --- a/drivers/net/ethernet/freescale/fec_ptp.c +++ b/drivers/net/ethernet/freescale/fec_ptp.c @@ -17,6 +17,8 @@ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include