From: Enric Balletbo i Serra Date: Fri, 21 Jun 2019 15:58:08 +0000 (+0200) Subject: ASoC: rk3399_gru_sound: Support 32, 44.1 and 88.2 kHz sample rates X-Git-Tag: v5.4-rc1~52^2~39^2~127 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=30b233b1cb4291d39ca08a95566721e8a52e5ee3;p=platform%2Fkernel%2Flinux-rpi.git ASoC: rk3399_gru_sound: Support 32, 44.1 and 88.2 kHz sample rates According to the datasheet the max98357a also supports 32, 44.1 and 88.2 kHz sample rate. This support was also introduced recently by commit fdf34366d324 ("ASoC: max98357a: add missing supported rates"). Actually the machine driver validates the supported sample rates but this is not really needed because the component driver can all apply whatever constraints are needed and do their own validation. So, remove the checks from the machine driver as are not needed at all. This way, we also support 32, 44.1 and 88.2 kHz sample rates and we get rid of the errors like the below. rk3399-gru-sound sound: rockchip_sound_max98357a_hw_params() doesn't support this sample rate: 44100 rk3399-gru-sound sound: ASoC: machine hw_params failed: -22 Signed-off-by: Enric Balletbo i Serra Signed-off-by: Mark Brown --- diff --git a/sound/soc/rockchip/rk3399_gru_sound.c b/sound/soc/rockchip/rk3399_gru_sound.c index 879069f..769d579 100644 --- a/sound/soc/rockchip/rk3399_gru_sound.c +++ b/sound/soc/rockchip/rk3399_gru_sound.c @@ -66,19 +66,7 @@ static int rockchip_sound_max98357a_hw_params(struct snd_pcm_substream *substrea unsigned int mclk; int ret; - /* max98357a supports these sample rates */ - switch (params_rate(params)) { - case 8000: - case 16000: - case 48000: - case 96000: - mclk = params_rate(params) * SOUND_FS; - break; - default: - dev_err(rtd->card->dev, "%s() doesn't support this sample rate: %d\n", - __func__, params_rate(params)); - return -EINVAL; - } + mclk = params_rate(params) * SOUND_FS; ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, 0, mclk, 0); if (ret) {