From: Neil Armstrong Date: Fri, 9 Nov 2018 10:57:47 +0000 (+0100) Subject: board: amlogic: move khadas-vim2 as q200 ref board X-Git-Tag: v2019.01-rc1~20^2~15 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=302987b6c56dba7e694b0ac8233e2b0c2aa107e6;p=platform%2Fkernel%2Fu-boot.git board: amlogic: move khadas-vim2 as q200 ref board The Khadas vim2 derive from amlogic s912 reference design (Q200). This patch moves the khadas-vim2 board support to a generic Q200 board, while keeping a dedicated defconfig to customize the names and device tree. Signed-off-by: Neil Armstrong --- diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index e0b28124..98303db 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -50,13 +50,14 @@ config TARGET_P212 You should also select this TARGET if you have Khadas Vim or a libretech aml-s905x-cc -config TARGET_KHADAS_VIM2 +config TARGET_Q200 bool "KHADAS-VIM2" select MESON_GXM help - Khadas VIM2 is a single board computer based on Meson GXM + Q200 is a reference dessign board based on Meson GXM with 2/3 GiB of RAM, Ethernet, HDMI, 4 USB, micro-SD slot, - eMMC, IR receiver and a 40-pin GPIO header. + eMMC, IR receiver. + You should also select this TARGET if you have Khadas Vim2. endchoice @@ -72,6 +73,6 @@ source "board/amlogic/nanopi-k2/Kconfig" source "board/amlogic/p212/Kconfig" -source "board/amlogic/khadas-vim2/Kconfig" +source "board/amlogic/q200/Kconfig" endif diff --git a/board/amlogic/khadas-vim2/Kconfig b/board/amlogic/q200/Kconfig similarity index 56% rename from board/amlogic/khadas-vim2/Kconfig rename to board/amlogic/q200/Kconfig index d0af362..cfaf379 100644 --- a/board/amlogic/khadas-vim2/Kconfig +++ b/board/amlogic/q200/Kconfig @@ -1,12 +1,12 @@ -if TARGET_KHADAS_VIM2 +if TARGET_Q200 config SYS_BOARD - default "khadas-vim2" + default "q200" config SYS_VENDOR default "amlogic" config SYS_CONFIG_NAME - default "khadas-vim2" + default "q200" endif diff --git a/board/amlogic/khadas-vim2/MAINTAINERS b/board/amlogic/q200/MAINTAINERS similarity index 54% rename from board/amlogic/khadas-vim2/MAINTAINERS rename to board/amlogic/q200/MAINTAINERS index ca63e31..be86386 100644 --- a/board/amlogic/khadas-vim2/MAINTAINERS +++ b/board/amlogic/q200/MAINTAINERS @@ -1,6 +1,6 @@ -KHADAS-VIM2 +Q200 M: Neil Armstrong S: Maintained -F: board/amlogic/khadas-vim2/ -F: include/configs/khadas-vim2.h +F: board/amlogic/q200/ +F: include/configs/q200.h F: configs/khadas-vim2_defconfig diff --git a/board/amlogic/khadas-vim2/Makefile b/board/amlogic/q200/Makefile similarity index 84% rename from board/amlogic/khadas-vim2/Makefile rename to board/amlogic/q200/Makefile index 4e7c9a0..fd78fd0 100644 --- a/board/amlogic/khadas-vim2/Makefile +++ b/board/amlogic/q200/Makefile @@ -3,4 +3,4 @@ # (C) Copyright 2016 BayLibre, SAS # Author: Neil Armstrong -obj-y := khadas-vim2.o +obj-y := q200.o diff --git a/board/amlogic/khadas-vim2/README b/board/amlogic/q200/README.khadas-vim2 similarity index 100% rename from board/amlogic/khadas-vim2/README rename to board/amlogic/q200/README.khadas-vim2 diff --git a/board/amlogic/q200/README.q200 b/board/amlogic/q200/README.q200 new file mode 100644 index 0000000..55d730a --- /dev/null +++ b/board/amlogic/q200/README.q200 @@ -0,0 +1,102 @@ +U-Boot for Amlogic Q200 +======================= + +Q200 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz + - ARM Mali T860 GPU + - 2/3GB DDR4 SDRAM + - 10/100/1000 Ethernet + - HDMI 2.0 4K/60Hz display + - 2 x USB 2.0 Host, 1 x USB 2.0 Device + - 16GB/32GB/64GB eMMC + - 2MB SPI Flash + - microSD + - SDIO Wifi Module, Bluetooth + - IR receiver + +Currently the u-boot port supports the following devices: + - serial + - eMMC, microSD + - Ethernet + - I2C + - Regulators + - Reset controller + - Clock controller + - USB Host + - ADC + +U-Boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make khadas-vim2_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + > git clone https://github.com/BayLibre/u-boot.git -b n-amlogic-openlinux-20170606 amlogic-u-boot + > cd amlogic-u-boot + > make gxm_q200_v1_defconfig + > make + > export FIPDIR=$PWD/fip + +Go back to mainline U-Boot source tree then : + > mkdir fip + + > cp $FIPDIR/gxl/bl2.bin fip/ + > cp $FIPDIR/gxl/acs.bin fip/ + > cp $FIPDIR/gxl/bl21.bin fip/ + > cp $FIPDIR/gxl/bl30.bin fip/ + > cp $FIPDIR/gxl/bl301.bin fip/ + > cp $FIPDIR/gxl/bl31.img fip/ + > cp u-boot.bin fip/bl33.bin + + > $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + > python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + + > $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + > $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + > $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + > $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/khadas-vim2/khadas-vim2.c b/board/amlogic/q200/q200.c similarity index 100% rename from board/amlogic/khadas-vim2/khadas-vim2.c rename to board/amlogic/q200/q200.c diff --git a/configs/khadas-vim2_defconfig b/configs/khadas-vim2_defconfig index 4bbccc2..49b8104 100644 --- a/configs/khadas-vim2_defconfig +++ b/configs/khadas-vim2_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MESON=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_MESON_GXM=y -CONFIG_TARGET_KHADAS_VIM2=y +CONFIG_TARGET_Q200=y CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" khadas-vim2" diff --git a/include/configs/khadas-vim2.h b/include/configs/q200.h similarity index 100% rename from include/configs/khadas-vim2.h rename to include/configs/q200.h