From: Heiko Schocher Date: Thu, 30 Oct 2014 12:14:03 +0000 (+0100) Subject: arm, imx, spi: detect spi flash again on aristainetos board X-Git-Tag: v2015.01-rc1~35^2~3 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2f6bb0a9419ec8016524142cb54fef81038b346e;p=platform%2Fkernel%2Fu-boot.git arm, imx, spi: detect spi flash again on aristainetos board 155fa9af95a "spi: mxc: fix sf probe when using mxc_spi" break spi flash detection on the aristainetos board. Fix this. Signed-off-by: Heiko Schocher --- diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c index 3bfcf5b..06922c0 100644 --- a/board/aristainetos/aristainetos.c +++ b/board/aristainetos/aristainetos.c @@ -230,6 +230,12 @@ static iomux_v3_cfg_t const backlight_pads[] = { MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == CONFIG_SF_DEFAULT_BUS && cs == CONFIG_SF_DEFAULT_CS) + ? (IMX_GPIO_NR(3, 20)) : -1; +} + static void setup_spi(void) { int i; diff --git a/include/configs/aristainetos.h b/include/configs/aristainetos.h index 20aea85..e6a08df 100644 --- a/include/configs/aristainetos.h +++ b/include/configs/aristainetos.h @@ -77,7 +77,7 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 3 -#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 20)<<8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN