From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Thu, 3 May 2012 23:43:55 +0000 (-0700)
Subject: USB: ch341.c: remove dbg() tracing calls
X-Git-Tag: upstream/snapshot3+hdmi~7443^2~194
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2ec7d459c0b557d7f09d57261052601710479054;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git

USB: ch341.c: remove dbg() tracing calls

dbg() was used a lot a long time ago to trace code flow.  Now that we have
ftrace, this isn't needed at all, so remove these calls.

CC: Johan Hovold <jhovold@gmail.com>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index aaab32d..70c46b0 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -125,8 +125,6 @@ static int ch341_set_baudrate(struct usb_device *dev,
 	unsigned long factor;
 	short divisor;
 
-	dbg("ch341_set_baudrate(%d)", priv->baud_rate);
-
 	if (!priv->baud_rate)
 		return -EINVAL;
 	factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
@@ -153,7 +151,6 @@ static int ch341_set_baudrate(struct usb_device *dev,
 
 static int ch341_set_handshake(struct usb_device *dev, u8 control)
 {
-	dbg("ch341_set_handshake(0x%02x)", control);
 	return ch341_control_out(dev, 0xa4, ~control, 0);
 }
 
@@ -164,8 +161,6 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 	const unsigned size = 8;
 	unsigned long flags;
 
-	dbg("ch341_get_status()");
-
 	buffer = kmalloc(size, GFP_KERNEL);
 	if (!buffer)
 		return -ENOMEM;
@@ -196,8 +191,6 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 	int r;
 	const unsigned size = 8;
 
-	dbg("ch341_configure()");
-
 	buffer = kmalloc(size, GFP_KERNEL);
 	if (!buffer)
 		return -ENOMEM;
@@ -254,8 +247,6 @@ static int ch341_attach(struct usb_serial *serial)
 	struct ch341_private *priv;
 	int r;
 
-	dbg("ch341_attach()");
-
 	/* private data */
 	priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
 	if (!priv)
@@ -290,7 +281,6 @@ static void ch341_dtr_rts(struct usb_serial_port *port, int on)
 	struct ch341_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
 	/* drop DTR and RTS */
 	spin_lock_irqsave(&priv->lock, flags);
 	if (on)
@@ -304,8 +294,6 @@ static void ch341_dtr_rts(struct usb_serial_port *port, int on)
 
 static void ch341_close(struct usb_serial_port *port)
 {
-	dbg("%s - port %d", __func__, port->number);
-
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 }
@@ -318,8 +306,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
 	int r;
 
-	dbg("ch341_open()");
-
 	priv->baud_rate = DEFAULT_BAUD_RATE;
 
 	r = ch341_configure(serial->dev, priv);
@@ -358,8 +344,6 @@ static void ch341_set_termios(struct tty_struct *tty,
 	unsigned baud_rate;
 	unsigned long flags;
 
-	dbg("ch341_set_termios()");
-
 	baud_rate = tty_get_baud_rate(tty);
 
 	priv->baud_rate = baud_rate;
@@ -393,8 +377,6 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 	uint16_t reg_contents;
 	uint8_t *break_reg;
 
-	dbg("%s()", __func__);
-
 	break_reg = kmalloc(2, GFP_KERNEL);
 	if (!break_reg) {
 		dev_err(&port->dev, "%s - kmalloc failed\n", __func__);
@@ -461,8 +443,6 @@ static void ch341_read_int_callback(struct urb *urb)
 	unsigned int actual_length = urb->actual_length;
 	int status;
 
-	dbg("%s (%d)", __func__, port->number);
-
 	switch (urb->status) {
 	case 0:
 		/* success */
@@ -580,8 +560,6 @@ static int ch341_tiocmget(struct tty_struct *tty)
 	u8 status;
 	unsigned int result;
 
-	dbg("%s (%d)", __func__, port->number);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	mcr = priv->line_control;
 	status = priv->line_status;