From: Douglas Anderson Date: Mon, 17 Jun 2019 17:56:51 +0000 (-0700) Subject: brcmfmac: sdio: Disable auto-tuning around commands expected to fail X-Git-Tag: v5.4-rc1~773^2~4 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2de0b42da263c97d330d276f5ccf7c4470e3324f;p=platform%2Fkernel%2Flinux-rpi.git brcmfmac: sdio: Disable auto-tuning around commands expected to fail There are certain cases, notably when transitioning between sleep and active state, when Broadcom SDIO WiFi cards will produce errors on the SDIO bus. This is evident from the source code where you can see that we try commands in a loop until we either get success or we've tried too many times. The comment in the code reinforces this by saying "just one write attempt may fail" Unfortunately these failures sometimes end up causing an "-EILSEQ" back to the core which triggers a retuning of the SDIO card and that blocks all traffic to the card until it's done. Let's disable retuning around the commands we expect might fail. Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson Acked-by: Adrian Hunter Reviewed-by: Arend van Spriel Acked-by: Kalle Valo Signed-off-by: Ulf Hansson --- diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index b6466f3..2ad8bdb 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -678,6 +678,8 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) brcmf_dbg(TRACE, "Enter: on=%d\n", on); + sdio_retune_crc_disable(bus->sdiodev->func1); + wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); /* 1st KSO write goes to AOS wake up core if device is asleep */ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err); @@ -738,6 +740,8 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) if (try_cnt > MAX_KSO_ATTEMPTS) brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err); + sdio_retune_crc_enable(bus->sdiodev->func1); + return err; }