From: Michael Chastain Date: Fri, 10 Sep 2004 01:04:59 +0000 (+0000) Subject: 2004-09-09 Michael Chastain X-Git-Tag: csl-arm-2004-q3~201 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=2db8e78e679d88bbdbaf32bdfbed44382f55c0d6;p=platform%2Fupstream%2Fbinutils.git 2004-09-09 Michael Chastain * lib/gdb.exp (gdb_file_cmd): Revert the return value to previous simple convention. Use a global variable to store information about what was found. (gdb_run_cmd): Adapt to reverted return value. * gdb.base/remote.exp: Adapt to reverted return value. * gdb.gdb/complaints.exp: Likewise. * gdb.gdb/observer.exp: Likewise. * gdb.gdb/selftest.exp: Likewise. * gdb.gdb/xfullpath.exp: Likewise. --- diff --git a/gdb/testsuite/gdb.base/remote.exp b/gdb/testsuite/gdb.base/remote.exp index 49430d7..b286e3a 100644 --- a/gdb/testsuite/gdb.base/remote.exp +++ b/gdb/testsuite/gdb.base/remote.exp @@ -119,7 +119,7 @@ proc gdb_load_timed {executable downloadsize class writesize} { set load_begin_time [clock clicks] set result [gdb_load $executable] set load_end_time [clock clicks] - if { [lindex $result 0] != "" } then { + if { $result != 0 } then { fail "$test - loading executable" return } diff --git a/gdb/testsuite/gdb.gdb/complaints.exp b/gdb/testsuite/gdb.gdb/complaints.exp index c29053c..2dd1508 100644 --- a/gdb/testsuite/gdb.gdb/complaints.exp +++ b/gdb/testsuite/gdb.gdb/complaints.exp @@ -49,17 +49,20 @@ proc setup_test { executable } { set timeout 600 verbose "Timeout is now $timeout seconds" 2 + global gdb_file_cmd_debug_info + set gdb_file_cmd_debug_info "unset" + set result [gdb_load $executable] set timeout $oldtimeout verbose "Timeout is now $timeout seconds" 2 - if { [lindex $result 0] != "" } then { + if { $result != 0 } then { + return -1 + } + + if { $gdb_file_cmd_debug_info != "debug" } then { + untested "No debug information, skipping testcase." return -1 - } else { - if { [lsearch -exact [lrange $result 1 end] "nodebug"] >= 0 } then { - untested "No debug information, skipping testcase." - return -1 - } } # Set a breakpoint at main diff --git a/gdb/testsuite/gdb.gdb/observer.exp b/gdb/testsuite/gdb.gdb/observer.exp index 652997b..b6d43b57 100644 --- a/gdb/testsuite/gdb.gdb/observer.exp +++ b/gdb/testsuite/gdb.gdb/observer.exp @@ -47,17 +47,20 @@ proc setup_test { executable } { set timeout 600 verbose "Timeout is now $timeout seconds" 2 + global gdb_file_cmd_debug_info + set gdb_file_cmd_debug_info "unset" + set result [gdb_load $executable] set timeout $oldtimeout verbose "Timeout is now $timeout seconds" 2 - if { [lindex $result 0] != "" } then { + if { $result != 0 } then { + return -1 + } + + if { $gdb_file_cmd_debug_info != "debug" } then { + untested "No debug information, skipping testcase." return -1 - } else { - if { [lsearch -exact [lrange $result 1 end] "nodebug"] >= 0 } then { - untested "No debug information, skipping testcase." - return -1 - } } # Set a breakpoint at main diff --git a/gdb/testsuite/gdb.gdb/selftest.exp b/gdb/testsuite/gdb.gdb/selftest.exp index fb559aa..e7d46bd 100644 --- a/gdb/testsuite/gdb.gdb/selftest.exp +++ b/gdb/testsuite/gdb.gdb/selftest.exp @@ -241,17 +241,20 @@ proc test_with_self { executable } { set timeout 600 verbose "Timeout is now $timeout seconds" 2 + global gdb_file_cmd_debug_info + set gdb_file_cmd_debug_info "unset" + set result [gdb_load $executable] set timeout $oldtimeout verbose "Timeout is now $timeout seconds" 2 - if { [lindex $result 0] != "" } then { + if { $result != 0 } then { + return -1 + } + + if { $gdb_file_cmd_debug_info != "debug" } then { + untested "No debug information, skipping testcase." return -1 - } else { - if { [lsearch -exact [lrange $result 1 end] "nodebug"] >= 0 } then { - untested "No debug information, skipping testcase." - return -1 - } } # disassemble yourself diff --git a/gdb/testsuite/gdb.gdb/xfullpath.exp b/gdb/testsuite/gdb.gdb/xfullpath.exp index a506a6b..570b311 100644 --- a/gdb/testsuite/gdb.gdb/xfullpath.exp +++ b/gdb/testsuite/gdb.gdb/xfullpath.exp @@ -48,17 +48,20 @@ proc setup_test { executable } { set timeout 600 verbose "Timeout is now $timeout seconds" 2 + global gdb_file_cmd_debug_info + set gdb_file_cmd_debug_info "unset" + set result [gdb_load $executable] set timeout $oldtimeout verbose "Timeout is now $timeout seconds" 2 - if { [lindex $result 0] != "" } then { + if { $result != 0 } then { + return -1 + } + + if { $gdb_file_cmd_debug_info != "debug" } then { + untested "No debug information, skipping testcase." return -1 - } else { - if { [lsearch -exact [lrange $result 1 end] "nodebug"] >= 0 } then { - untested "No debug information, skipping testcase." - return -1 - } } # Set a breakpoint at main diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp index 433015f..9100118 100644 --- a/gdb/testsuite/lib/gdb.exp +++ b/gdb/testsuite/lib/gdb.exp @@ -180,8 +180,7 @@ proc gdb_run_cmd {args} { if [target_info exists gdb,do_reload_on_run] { # Specifying no file, defaults to the executable # currently being debugged. - set status [gdb_load ""] - if { [lindex $status 0] != "" } { + if { [gdb_load ""] != 0 } { return; } send_gdb "continue\n"; @@ -226,8 +225,7 @@ proc gdb_run_cmd {args} { send_gdb "y\n" } -re "The program is not being run.*$gdb_prompt $" { - set status [gdb_load ""] - if { [lindex $status 0] != ""] } { + if { [gdb_load ""] != 0 } { return; } send_gdb "jump *$start\n"; @@ -249,8 +247,7 @@ proc gdb_run_cmd {args} { } if [target_info exists gdb,do_reload_on_run] { - set status [gdb_load ""] - if { [lindex $status 0] != "" } { + if { [gdb_load ""] != 0 } { return; } } @@ -957,36 +954,37 @@ proc default_gdb_exit {} { } # Load a file into the debugger. -# The return value is a list with the following information: +# The return value is 0 for success, -1 for failure. # -# { message word ... } -# -# MESSAGE has the following values: -# -# "" file was loaded successfully -# "..." file was not loaded successfully. -# A perror has been generated with MESSAGE. +# This procedure also set the global variable GDB_FILE_CMD_DEBUG_INFO +# to one of these values: # -# If the MESSAGE is "", then there is an optional set of words. -# The words may be: +# debug file was loaded successfully and has debug information +# nodebug file was loaded successfully and has no debug information +# fail file was not loaded # -# nodebug this file does not contain debug information +# I tried returning this information as part of the return value, +# but ran into a mess because of the many re-implementations of +# gdb_load in config/*.exp. # -# TODO: gdb.base/sepdebug.exp and gdb.stabs/weird.exp might -# be able to use this if they can get more information -# in the return value. +# TODO: gdb.base/sepdebug.exp and gdb.stabs/weird.exp might be able to use +# this if they can get more information set. proc gdb_file_cmd { arg } { global gdb_prompt global verbose global GDB + # Set whether debug info was found. + # Default to "fail". + global gdb_file_cmd_debug_info + set gdb_file_cmd_debug_info "fail" + if [is_remote host] { set arg [remote_download host $arg] if { $arg == "" } { - set message "download failed" - perror $message - return { $message } + perror "download failed" + return -1 } } @@ -994,15 +992,17 @@ proc gdb_file_cmd { arg } { gdb_expect 120 { -re "Reading symbols from.*no debugging symbols found.*done.*$gdb_prompt $" { verbose "\t\tLoaded $arg into the $GDB with no debugging symbols" - return { "" nodebug } + set gdb_file_cmd_debug_info "nodebug" + return 0 } -re "Reading symbols from.*done.*$gdb_prompt $" { verbose "\t\tLoaded $arg into the $GDB" - return { "" } + set gdb_file_cmd_debug_info "debug" + return 0 } -re "A program is being debugged already.*Kill it.*y or n. $" { send_gdb "y\n" - verbose "\t\tKilling previous program being debugged" + verbose "\t\tKilling previous program being debugged" exp_continue } -re "Load new symbol table from \".*\".*y or n. $" { @@ -1010,37 +1010,33 @@ proc gdb_file_cmd { arg } { gdb_expect 120 { -re "Reading symbols from.*done.*$gdb_prompt $" { verbose "\t\tLoaded $arg with new symbol table into $GDB" - return { "" } + set gdb_file_cmd_debug_info "debug" + return 0 } timeout { - set message "(timeout) Couldn't load $arg, other program already loaded." - perror $message - return { $message } + perror "(timeout) Couldn't load $arg, other program already loaded." + return -1 } } } -re "No such file or directory.*$gdb_prompt $" { - set message "($arg) No such file or directory" - perror $message - return { $message } + perror "($arg) No such file or directory" + return -1 } -re "$gdb_prompt $" { - set message "couldn't load $arg into $GDB." - perror $message - return { $message } + perror "couldn't load $arg into $GDB." + return -1 } timeout { - set message "couldn't load $arg into $GDB (timed out)." - perror $message - return { $message } + perror "couldn't load $arg into $GDB (timed out)." + return -1 } eof { # This is an attempt to detect a core dump, but seems not to # work. Perhaps we need to match .* followed by eof, in which # gdb_expect does not seem to have a way to do that. - set message "couldn't load $arg into $GDB (end of file)." - perror $message - return { $message } + perror "couldn't load $arg into $GDB (end of file)." + return -1 } } } @@ -1655,6 +1651,7 @@ proc gdb_exit { } { # # gdb_load -- load a file into the debugger. +# Many files in config/*.exp override this procedure. # proc gdb_load { arg } { return [gdb_file_cmd $arg]